behringer PM1 In Ear Monitor Beltpack User Guide
- August 2, 2024
- Behringer
Table of Contents
behringer PM1 In Ear Monitor Beltpack
USER GIDE
Safety Instruction
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Use only attachments/accessories specified by the manufacturer.
10. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
11. Correct disposal of this product: This symbol indicates that this product
must not be disposed of with household waste, according to the WEEE Directive
(2012/19/EU) and your national law. This product should be taken to a
collectioncenter licensed for the recycling of waste electrical and electronic
equipment (EEE). The mishandling of this type of waste could have a possible
negative impact on the environment and human health due to potentially
hazardous substances that are generally associated with EEE. At the same time,
your cooperation in the correct disposal of this product will contribute to
the efficient use of natural resources. For more information about where you
can take your waste equipment for recycling, please contact your local city
office, or your household waste collection service.
12. Do not install in a confined space, such as a book case or similar unit.
13. Do not place naked flame sources, such as lighted candles, on the
apparatus.
Controls
(1) XLR locking jack accepts an XLR male plug for connection of a stereo
personal monitor mix. Press the release tab to disconnect the cable. Signals
should be sent from a stereo headphone amplifier to the PM1. Note that the PM1
XLR input is not meant for balanced line signals.
To connect a stereo source, such as a headphone amplifier, use a TRS-to-XLR
cable. Alternatively, you can use a dual 1/4″ TS-to-XLR cable (two 1/4″ mono
connectors to a single XLR male connector) to connect a stereo signal on
separate outputs, or a pair of aux sends.
(2) VOLUME knob adjusts the output level.
(3) HEADPHONE output allows connection of a 1/8″ stereo mini jack.
(4) BELT CLIP attaches to a belt or pant waistline for hands-free use.
Connection
Specifications:
-
Product: Behringer PM1
-
Input: XLR locking jack
-
Output: 1/8 stereo mini jack
-
Controls: VOLUME knob
-
Additional feature: BELT CLIP for hands-free use
-
-
Frequently Asked Questions (FAQ):
Q: Can I use balanced line signals with the PM1 XLR input?
A: No, the PM1 XLR input is not meant for balanced line signals.
Use it with stereo sources like headphone amplifiers.
Q: How should I clean the Behringer PM1?
A: Clean the device only with a dry cloth to avoid any damage from moisture.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>