thdstatic 64-X1022 64 Inch Ceiling Fan Installation Guide

: August 2, 2024
: thdstatic

Table of Contents

SAFETY INFORMATION
Installation Location
PRE-INSTALLATION

thdstatic 64-X1022 64 Inch Ceiling Fan Installation Guide

SAFETY INFORMATION

Please read all safety information and instructions before installing the ceiling fan and save this manual for future reference.

WARNING

Before connecting the power supply, make sure that the power supply used matches the specifications of the ceiling fan.
All wiring must comply with national and local electrical codes ANSI/NFPA70. If you are not familiar with wiring, please use a qualified electrician.
To reduce the risk of fire or electric shock, tum off the power to the fuse box or circuit
breaker before installing the fan.
To reduce the risk of personal injury, attach the fan directly to the building’s support structure and ensure that it can accept at least 35 pounds (15.9 kg).
Make sure that the installation location allows the fan blades to rotate without obstacles.

Installation Location

WARNING

Do not install the fan with wet hands.
Do not insert foreign objects between the rotating fan blades.
Do not bend the fan blades when installing or cleaning the fan.
Do not disassemble or modify this product or use non-original parts without permission.
Keep children away from your working area.
Properly dispose of the fan’s packaging material.
Make sure the ceiling fan is firmly secure to the ceiling. Double check all connections before you restore power.
Turn off the fan and wait for the blades to stop completely before performing any maintenance or cleaning.

PRE-INSTALLATION

Tools Required (Not Included)

Power Drill
Screwdriver
Step Ladder
Wire Stripper
Electrical Tape

Parts List

Mounting Bracket X 1
Canopy X 1
LED & Light Kit Pan X 1
Fan Motor Assembly X 1
Coupling Cover X 1
Canopy Cover X1
Light shade X1
Down rod X 2
Blade Holder Screw X18
Receiver X 1
Remote Control Bracket X 1
Remote Control X 1
Balance Kit X2
Expansion Bolt X 2
Self-tapping Screw X 4
Remote Bracket Screw X 2
Fan blade disk X 1
Fan Blade X3
Aircraft Cap X2

INSTALLATION INSTRUCTION

Step 1: Mounting Bracket Installation

Drill holes with electric drill (48 mm).
Use expansion screws to fix the mounting bracket to the ceiling.

Fasten the mounting bracket to the ceiling with self-tapping screws.

Step 2: Fan Blade Installation

Secure the assembled fan blades to the fan blade disc with screws, a total of 9 sets.
Loosen the screws of the triangular cover on the motor with an electric drill.

Note:

The fan blade needs to be aligned with the “center” position of the screw hole group.
Do not lock the screws when installing the blades and then tighten all the screws after all the fan blades are installed.

Step 3: Installation of LED Board

Align the LED board with the triangular cover on the motor and put it on.
Install the screws on the triangular cover into the corresponding holes.
Thread the light line through the LED board, then connect the motor line and the lamp panel line.

Step 4: Downrod Installation

Select a suitable dowry. (2 lengths are available 7,8713,8) other size down rod please contact costumer service.
Take out dives pin on the motor.
Loosen the screws on the motor, and do not take them out completely.
Assemble the canopy, canopy cover and coupling cover to the down rod in turn.
Thread the motor wire through the lower pull rod, lock the fixing screw with the clevis pin, and tighten the motor screw.

Step 5: Installation of the Assembled Fan

Lift the assembled fan onto the mounting bracket…
Ensure the concave groove of the hanger ball is positioned on the hanger lug of the mounting bracket.

Step 5: Wiring Instruction
Shut off the power to the fuse box or circuit breaker before wiring.

Connect the ceiling power cord to the receiver.
The receiver is connected to the motor power cord and the ceiling power cord respectively.
Put the receiver into the mounting bracket.
Cover the receiver and power cord and tighten the screws.
Decorative cover on, rotate, tighten.

Note: Connect wires colour to colour, plug to plug.
Live Wire
Neutral Wire
Ground Wire

Step 7: Install the Lampshade

Put the Ian cover to the LED board.
Spin forward to San ten the light cover.

NOTICE
If the house suitable for installing a 1.5m(590 inches), it should a new controller, Please contact us for customisation

Step 8: Change Down rod (OPT)

How to choose different lengths of down rod

The ceiling of the house is 100 inches from the ground, suitable for installing a 5-inch down rod.
The ceiling distance of the house is 110 inches, which is suitable for installing a 10-inch down rod.
The ceiling of the house is 120 inches from the ground, which is suitable for installing a 14-inch down rod.
If the space requires a longer boom, you will need to use a longer extension wire, the wire thickness should be selected close to the motor wire thickness, too thick or too thin (changing the resistance required by the receiver), the motor may not work.

If you need to change different length down rod, please follow these steps:

Loosen the screws on the hanging ball..
Remove the metal bar.
Take off the hanging ball from the original down rod,
Install the hanging ball to an appropriate down rod.
Insert the metal bar
Tighten the screws.

OPERATION INSTRUCTION

**Control Method

**

Notice:
The remote controller only needs to be paired once. After the paired product, the controller will have memory. The products have been paired before leaving the factory. When the remote control is damaged or lost, it is necessary to implement remote control pairing before using a new remote control.

Turn OFF the Fan and Light/Memory function mode of the fan
Turn OFF the Fan and Light together.
Press and hold the key for 2-3 seconds, buzzer wrings two times to turn ON/OFF the memory function of fan running state before the fan is turned AC power off.
Fan speed Press keys 1-6 to start the fan.
Timing control of the Fan
- Press keys 1H/4H/8H to set up fan timer at thou, 4 hours or 8 hours. At the end of the timing, the fan will be automatically turned off..
- When the timing function is in effect, you can operate all the functions of the ceiling fan.
- Timer setting cancellation: When timing function is working, press key(1) or key(7) to cancel the timing function
Direction of the fan
The fan blows downward.
Turn ON/OFF the buzzer sound
Press the key to turn on or turn off the buzzer sound.
Direction of the fan
The fan blows upward.
Fan OFF/Remote control pairing (Compound function key).
- Turn OFF the fan.
- Remote control pairing when AC power on, press and hold the key for 3-5 seconds, buzzer wrings three times, then finish the remote control pairing.
Turn ON OFF the light/Memory function mode of the light.
Press the key to turn on or turn off the light. Press and hold the key for 2-3 seconds, buzzer wrings two times to turn ON/OFF the memory function of lighting state before the fan is turned AC power off. (Just remember the state of the light, not the Jight’s color temperature. Please refer to the “P10 Trouble. shooting for the color temperature memory program for the light.)
AAA battery 2
- Please install 2 pieces of AAA batteries before use.
- Please remove the battery when it is not used for a long time.
Working indicator The indicator light will light up when press any key of the remote control.

Reversible Function

Summer (Forward): A downward airflow creates a cooling effect.

Winter (Reverse): An upward airflow increases the indoor temperature.

PS: If you want to change the fan’s rotation direction, please press the button while the fan is running.

Timing Control
1H: The fan will automatically shut off after 1 hour,
4H: The fan will automatically shut off after 4 hours.
8H: The fan will automatically shut off after 8 hours.

Close the Timing Control: Press the button “FAN ON/OFF

Memory function of LED light colour temperature.

Our LED Light comes with a color temperature memory function. If the light is turned off or less than 7 seconds and then turned on again, it will switch to the next color temperature. If the light is turned off or more than 7 seconds and then turned on again, it will remember the color temperature from before it was turned off.
Note : The LED light may not correspond with the image. Please refer to the actual product.

SPECIFICATIONS

Product Name	Ceiling Fan	Size	64″
Gross Weight	5KG
Rated Voltage	22W LED	Motor Power	35W
Lamp configuration	22W LED	Motor Spec	#153X12
Lampshade size	Ø230mm	Overall height	405mm (with 7.8″ rod)
control method	Remote Control	Fan blade	6 Splint Fan Blades

TROUBLESHOOTING

If there is a problem with the fan during use, please check the following tips for solutions. If the problem still cannot be solved, please contact our after-sales team.

The Fan Dose Not Respond to the Remote Control.

Check that all wire connections are correct and secure.
Verify that the power is tumed on and reaching the receiver,
Verify that the batteries of the remote control are installed with the correct polarity, making sure to install the + (positive) end of the batteries on the solid end and the (negative) end on the spring.

The Fan Makes a Humming Noise.

Make sure the controls you use are supplied with your fan,
Make sure all accessories are securely fastened. Loose parts often cause a vibrating noise or buzzing sound. •
Disassemble the fan and reinstalling it can sometimes remedy this resonant vibrating noise.

The Fan Makes a Repetitive Ticking Noise.

Check for obstructions in the rotor path.
Make sure mounting hardware at the ceiling is firmly fasten.
Make sure all other hardware and blade attachments are tight.
Give the fan a “Break in Period” of a few hours to a few days, then repeat the steps above.

The Fan Wobbles.

Make sure the mounting plate and hardware at the ceiling are firmly fastened,
Make sure all screw fittings on the fan are tight.
If necessary, use the self-tapping screws provided to further secure the bracket to the joist.

Warning sound.

In the case of a motor fault, a buzzer is typically used to emit a warning sound. When the motor lacks a phase, meaning that one of the phases is not functioning properly, the buzzer will emit a continuous single beep as a warning. This indicates that the motor is unable to operate correctly.
if the motor gets stuck and cannot rotate, the buzzer will emit a continuous double beep as a warning. These warning sounds are intended to alert users to the abnormal conditions of the motor and prompt them to perform necessary repairs or inspections.

About light color temperature
The remote control’s light memory function can only remember the light’s on/off state, not the color temperature, Therefore, we have added a program to remember the light’s color temperature in the LED light itself. You can select/remember the light’s color temperatures by using the light on/off switch on the remote control. When you turn the light on and then off, the program will record the time of turning off. If the light is muted off for less than 7 seconds, when you turn it on again, the light will switch to the next color temperature. If the light is timed off for more than 7 seconds, when you turn it on again, the light will remember the last color temperature used. This program is designed this way because most people tend to use a specific color temperature continuously unal they no longer need it and turn it off, which usually takes more than 7 seconds.
It is normal for some LED light to require to be tumed off for more than 30 seconds to remember the last color temperature used. The exact time required for the light source to remember the last color temperature may vary depending on the specific light source and its programming. However, the default time of 7 seconds for remembering the last color temperature used is suitable for most LED lights.

CONTACT INFORMATION

We want to hear your voice! Feel free to touch base if you encounter any issue when using our product(s) or want to know more about our brand. We will be more than happy to provide top-notch pre-sales & after-sales service 24/7.