behringer DIGITAL REVERB DR600 Digital Stereo Reverb Effects Pedal User Manual

behringer DIGITAL REVERB DR600 Digital Stereo Reverb Effects Pedal

Specifications

• Product Name: DIGITAL REVERB DR600
• Type: Digital Stereo Reverb Effects Pedal
• Version: 2.0

Product Usage Instructions

Safety Instructions

1. Read the provided safety instructions carefully.
2. Keep the instructions in a safe place for future reference.
3. Follow all safety warnings mentioned.
4. Adhere to all operational instructions provided.
5. Avoid using the apparatus near water to prevent damage.
6. Clean the product only with a dry cloth to prevent electrical hazards.
7. Ensure ventilation openings are not blocked during operation.
8. Avoid placing the device near heat sources to prevent overheating.
9. Use only attachments and accessories recommended by the manufacturer.
10. Use appropriate stands or tables as specified by the manufacturer for safe operation.
11. Dispose of the product responsibly to contribute to environmental conservation.
12. Avoid installing the product in confined spaces to prevent overheating.
13. Do not place naked flame sources on the device to avoid fire hazards.

Frequently Asked Questions (FAQ)

Q: Can I use this pedal with a battery?
A: Yes, this pedal can be powered using a 9V battery or a suitable power adapter.

Q: How do I reset the settings on the DR600 pedal?
A: To reset the settings, press and hold the ‘Reset’ button for 5 seconds until the display indicates a reset has been performed.

Safety Instruction

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.
   Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Use only attachments/accessories specified by the manufacturer.

10. Use only with the cart,stand, tripod,bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

11. Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste,according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE).
    The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.

12. Do not install in a confined space, such as a book case or similar unit.

13. Do not place naked flame sources, such as lighted candles,on the apparatus.

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications,appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound,TC Electronic, TC Helicon, Behringer,Bugera, Aston Microphones and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2024 All rights reserved.

Thank you for showing your confidence in us by purchasing the Behringer DIGITAL REVERB DR600. This ultimate effects pedal is specifically designed to deliver 24-bit high-resolution stereo reverbs comparable to state-of-the-art studio processors. Thanks to six renowned modes and extensive parameter control for maximum creativity you’ll have plenty of cool sounds at your disposal for every situation.

Controls

1. The LEVEL control adjusts the output level.

2. The TONE controlallows you to shape your overall sound.

3. The TIME control determines the rever time.

4. The MODE control lets you chose between six different reverb sounds:
   SPRING: Simulates classic spring reverberation.
   PLATE: Simulates the sound of plat reverberation.
   HALL: Very bright reverb that simulates the reflections of a concert hall.
   GATE: This effect snthetically cuts off reverberation after a period of time.
   ROOM: Clearly hear natural room acoustics.
   MODULATE: By detuning the reverb tail it creates spacious, almost choir- like reverb that reminds a little bit of a chorus effect.

5. The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.

6. Use the footswitch to activate/deactivate the effect.

7. Use the two ¼” TS connectors IN A and IN B to plug in a stereo input signal. For mono use just plug in IN A.

8. The two ¼” TS connectors OUT A and OUT B send the signal to your amp. Use both connectors if you want to achieve full stereo effect. For mono use just plug in OUT A.

Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover.
To install or replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to scratch the unit.

The DR600 has no on/off switch. As soon as you insert the jack into the IN connector, the DR600 begins running. When not using the DR600, remove the jack from the IN connector. This extends the life of the battery.
The SERIAL NUMBER is located at the bottom.

Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.

Limited Warranty

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at community.musictribe.com/support.

Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

WARNING

• As with all small batteries, the batteries used with this product should be kept away from small children who still put things in their mouths. If they are swallowed, promptly call your local poison control center.
• Always purchase the correct size and grade of battery most suitable for intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries are installed correctly with the regard to polarity (+ and -).
• Always remove battery if consumed or if product is to be left unused for a long time.
• Replacement of a battery with an incorrect type that can defeat a safeguard! Replace only with the same or equivalent type!
• Risk of fire or explosion if the battery is replaced by an incorrect type.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
• Attention should be drawn to the environmental aspects of battery disposal.

Specifications

In A

• Connector 1/4″ TS
• Impedance 500 kΩ
• Impedancia mono 250 kΩ

In B

• Connector 1/4″ TS
• Impedance 500 kΩ

Out A

• Connector 1/4″ TS
• Impedance 1 kΩ

Out B

• Connector 1/4″ TS
• Impedance 1 kΩ

Power Supply

• 9 V ?, 100 mA regulated

Behringer PSU-SB

• USA / Canada 120 V~, 60 Hz
• China/Korea 220 V~, 50 Hz
• UK/Australia 240 V~, 50 Hz
• Europe 230 V~, 50 Hz
• Japan 100 V~, 50 – 60 Hz
• Power connector   2 mm DC jack, negative center
• Battery 9 V type 6LR61
• Power consumption 90 mA

Physical/Weight

• Dimensions approx. 2 1/8 x 2 3/4 x 4 4/5″
• (H x W x D) approx. 54 x 70 x 123 mm
• Weight approx. 0.73 lbs / 0.33 kg

Behringer is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Behringer
DIGITAL REVERB DR600

Responsible Party Name: Music Tribe
Commercial NV Inc.
Address: 122 E. 42nd St.1,
8th Floor NY,
NY 10168,
United States
Email Address: legal@musictribe.com

DIGITAL REVERB DR600

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Important information:

Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.

Hereby, Music Tribe declares that this product is in compliance with Directive 2014/30/EU,Directive 2011/65/EU and Amendment 2015/863/EU,Directive 2012/19/EU, Regulation 519/2012
REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/

EU Representative: Music Tribe Brands DK A/S
Address: Gammel Strand 44, DK-1202 København K,Denmark
UK Representative: Music Tribe Brands UK Ltd.
Address: 8th Floor, 20 Farringdon Street London
EC4A 4AB, United Kingdom

References

• Behringer | Home
• Music Tribe
• Music Tribe
• Music Tribe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>