AeoFit Comet SmartWatch Instruction Manual

Operating Instructions for Smart
Sport Watch Product

Comet SmartWatch

A: First of all, please be sure to connect our smart watch through the “GloryFit” APP.

B: Perform the following steps to enable the answer/call function.

If you don’t need to use the call function, you can turn off the answer/ call function so that the battery can last longer.

Appearance Description

Schematic Diagram of Charging

1. Please ensure that the product-specific magnetic charging cable is used to align with the charging port on the back of the watch for charging.
2. Avoid using a power adapter with a voltage exceeding 5V and an output current exceeding lA for charging, as this may result in charging failure and potential damage to either the magnetic charging cable or the device.
3. When it runs out of power and smartwatch shutdown, please charge to activate the watch The watch screen will only light up after approximately 5 minutes of normal charging.

Introduction to Watch Function

1. Call Bluetooth switch
2. Theme mode switch
3. Do Not Disturb On/Off
4. Mute Mode
5. Brightness adjustment :
6. Raise to Wake
7. Switch into flashlight
8. Find phone
9. Setting

| Main interface: Display the current time, date, steps and other information of the watch; press the main interface for a long time to switch the main dial left and right, and click to confirm.
---|---
| Call function: Click the call switch. Open the phone settings Bluetooth – search connection Bluetooth Air5 -xxxx to play mobile music or make/receive calls, etc.
| Steps: Display current steps, distance, calories on the watch.
| Heart rate: Slide to this page and keep a while and automatically measure the current real-time dynamic heart rate. Connectable to APP to set real-time monitoring and view data records.
| Blood oxygen: Slide to this page and keep a while and automatically measure the current blood oxygen data and vibrate to indicate the result.
| Exercise: Click on the icon on this page to access the multiple sport modes option. Select a sport mode, click the icon to start, and slide right to pause or stop the sport.
| Sleep: The smartwatch can record and display your sleeping time last night, and the time of deep sleep and light sleep. More detailed data can be viewed synchronously in the APP.
| Weather: Display the local weather conditions. Connect the synchronization APP for normal use, and apen the phone GPS to ensure that the APP gets the positioning permission function and network connection.
| Message: The watch can receive cell phone calls, SMS, WhatsApp, Facebook and other notification alerts, which can be set according to the message alert and turn on the corresponding push switch on the APP This page can store up to 8 message records. Note: Smartwatch needs to connected with the phone and make sure the APP gets the corresponding permission.
| Music: After connecting the APP, the watch can control the mobile phone player for playing/pausing the previous song and switching to the next song. Note: Music player must be opened on the mobile phone before it can be controlled on the watch by the function. Smartwatch needs to connected with the phone and the fuction enable the notification push permission.
| Stopwatch: Click on the icon to start the function, and click on Start for timing, pause or reset. Slide right to exit.
| Find phone : Click on the icon,and your phone will beep to indicate where is sound from. Note: Smartwatch needs to connected with the phone. Mention:No alert on the phone in mute mode.
| Setting: Click on the icon to start the function, and slide up and down to select for setting functions, such as the brightness adjustment, factory data reset, turn off the watch and view the watch information.

Watch APP Installation and Connection Instructions

Smartwatch with Bluetooth should be connected to a special GloryFit APP,then the most of the functions could be normal used, such as time display, call notication, and message notication. For Android phones, please scan the following QR code to select the version suitable for your mobile phone system or enter main application markets to download and install GloryFit APP.

https://app.help-document.com/gloryfit/download/index.html

Mention : Please do not use Bluetooth to connect and pair with the watch directly for Android phones.

Device Connection

Before using the APP, please turn on the mobile phone Bluetooth and mobile phone GPS positioning to obtain the mobile phone positioning permission. After the connection is successful, it will prompt “To pair with: Air5” , please select pairing.
The watch connection operates as follows:

Note:

1. For Android users, the APP should obtain permissions and run backstage, and you can use normally.
2. For systems above iPhone iOS 13, first connect with smartwatch in the APP, and then connect with the Air5 in the Bluetooth settings of the phone, and then you can make calls and use other functions normally.

Precautions

1. Aviod charging under the condition with water.
2. This product is an electronic monitoring product, not for medical use and the measurement data is for reference only.
3. Do not wear in hot water baths and longtime swimming.
4. Please charge with the matching charging cable.

FAQ

1. The watch Air5 cannot be searched in the APP, or the watch cannot synchronize with cell phone data.

Answer: A, Make sure your phone's Bluetooth and phone GPS positioning are are before using it for the first time. B. Users need to open the APP to oblain positioning permission (Phone Settings - Applications). C. If the watch has already been paired with a Bluetooth connection in the phone, please cancel the pairing first and repairing in the APP again. D. If the watch is not used for a long time, the Bluetooth will disconnect from the phone. Please turn off the smartwatch bluetooth and the phone, turn on after about 1 minute, and try to search the connection in the APP again. E. The watch must be connected to the APP, then the steps, sleep, time, and other function will work properly.

2. There is no reminder function on the watch.

3. Turn on the reminder switch, but there is no reminder on the watch, or the reminder is not real-time.

Answer: If turn on the message notification of the phone and the corresponding notification permission according to the above tips, the Bluetooth is enable, and the APP and the watch are kept connected, maybe the system authorized APP reminder function is not working. A. Shutdown the smart watch and disconnect smartwatch Air5 in the Glory Fit APP. and power on the watch. B. pairing watch with the phone, and turn on the message notification of the phone and the corresponding notification permission according to the above tips.

4. Android's phone Bluetooth often disconnects or has no message reminder after a period of connection.

Answer: Different Android phones have different methods for APP backstage running settings. As in the Huawei nova 8 SE: Settings - Battery - Power Consumption Ranking - APP - Application Launch Management - Manually manage to turn on backstage running. Reason: Android will clean up the phone's backstage applications or applications that consume more power for smooth system operation from time to time. If the APP is not set to allow backstage running, it will be easily cleaned by the system and the Bluetooth will drop out.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>