Airback B0D6VT5499 Air Pump Instruction Manual

Airback B0D6VT5499 Air Pump

TRAVEL LOCK

This product is equipped with a travel lock function, which can avoid accidental starting in the bag, gage

Lock: In the off state, press the switch for seconds, the motor does not rotate, and the indicator light flashes and enters the travel lock lacking state.
Unlocking: When the travel lock. is locked, press the switch for 3 seconds! the indicator light flashes and ex·ts the travel lock state, which can be, used normally.

Long press switch 3 seconds lock
Long presses with seconds unblock

In order to achieve optimal performance, it is suggested that the air pump be fully charged before use.

WARNING

• This product should be used in an environment more than -20°C (-4F°) and less than 50°C (122F°).
• Do not use the pump continuously more than 5 minutes. When using again, it must be cooled more than 5 minutes.
• This product contains a built-in lithium battery. Keep away from fire and do not charge at high temperature.
• Two rechargeable lithium batteries are inside the pump. Please charge it 3 hours before first using.
• The pump can only be used with provided USB-C charging line, and the charging voltage must not exceed 5V.
• Please do not modify this pump by yourself.
• This pump built-in DC motor, do not use in flammable and explosive environments.
• Do not insert the objects into or interfere with the fan chamber.
• Do not charge in wet conditions.
• Do not plug or remove the charger with wet hands.
• Dispose of the device,battery and other accessories in accordance with local regulations;do not dispose of them as household waste.Improperly disposing of the battery may cause the battery to explode.
• The pump must be stored in a dry environment at -20°C-45 C temperature. If the pump is not used for more than 1 months, the battery will discharge. The battery must be charged every 1 month.

THE NOZZLES

Product introduction

Low power indicator

Low power indicator The red light is on, indicating that the battery is less than 5% and needs to be charged in time.
Charge time: 2hours
INPUT: 5V 0.7 A or 1A

USE

1. inflate

   • Pick the suitable nozzle
   • Connect

2. Deflate

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>