Dinosaur Designs Ring Size Measuring Instructions
- July 29, 2024
- Dinosaur Designs
Table of Contents
Dinosaur Designs Ring Size Measuring
Product Specifications
- Material: Handmade
- Sizes Available: Narrow, Regular, Wide
- Size Determination: US sizing, inner diameter in millimeters
Product Usage Instructions
Step 1: Setting Up
Ensure your printer scale is set to 100% before printing. Verify the scale by
measuring the provided scale length (1.97 inch or 50mm).
Step 2: Finding Your Size
Select a band ring that best fits the intended finger.
Step 3: Matching Your Size
Place the ring on top of the circles provided until you find the black ring
that matches the inside circle circumference of your ring. Refer to the scale
guide for corresponding sizes.
DINOSAUR DESIGNS RING SIZE GUIDE
Each ring is characterised by a warmth and tactility only possible by making
each piece by hand. Due to their handmade nature, sizing may vary as a result
of hand finishing. Rings are available in Dinosaur Designs standard sizes
Narrow, Regular and Wide. Sizing is determined in US sizing, measuring the
inner diameter in millimetres. Refer to the guide provided to determine your
best fit.
THE GUIDE
- Set scale to 100% before printing. Check the scale by measuring the scale below (1.97 inch)
- Select a band ring that best fits the intended finger
- Place the ring on top of the circles below until you find the black ring that matches the inside circle circumference of your ring
FAQ
Q: Are the rings resizable?
A: Due to their handmade nature, resizing might not be possible without
compromising the design and quality.
Q: How should I clean the rings?
A: Clean the rings with a soft cloth and mild soap. Avoid harsh chemicals or
abrasive materials that may damage the finish.
Q: Can I wear the rings in water?
A: It is recommended to avoid prolonged exposure to water to maintain the
integrity of the handmade rings.