WOOR BA530 Baby Monitor Mount for VTech Baby Monitor Instruction Manual

WOOR BA530 Baby Monitor Mount for VTech Baby Monitor

Specifications

• Model: $$4UBUFNFOU
• Power: 5V DC
• Weight: 344g
• Dimensions: 10 x 5 x 3 inches

Product Information

The $$4UBUFNFOU is a versatile device designed to provide users with visual indicators for various functions. It features LED lights that convey different statuses and notifications, enhancing user experience and understanding.

Usage Instructions

1. Connect the device to a 5V DC power source.
2. Refer to the user manual to understand the meaning of different LED light patterns.
3. Mount the device in a suitable location for easy visibility.
4. Interact with the device based on the displayed indicators to respond accordingly to different situations.

FAQ

• Q: How do I reset the device?
  

  • A: To reset the device, press and hold the reset button for 10 seconds until the lights flash.

• Q: Can I change the brightness of the LED lights?
  

  • A: No, the brightness level of the LED lights is fixed and cannot be adjusted.

• Q: What should I do if the LED lights are not functioning correctly?
  

  • A: If you encounter issues with the LED lights, please contact customer support for assistance.

WHAT’S INCLUDED

PRODUCT OVERVIEW

Baby Camera

1. Indicator light
2. Camera lens
3. Microphone
4. SD card slot
5. Speaker
6. SYNC button
7. Power port

Note: Rotate the camera upwards to reveal the SD card slot

Baby Monitor

1. Screen
2. Indicator light
3. Volume control
4. Zoom in/out control
5. Menu/OK button
6. Navigation buttons
7. Return button
8. Microphone
9. Talk button
10. Speaker
11. Power button
12. SD card slot
13. Antenna
14. Power port
15. Support stand

SETTING UP THE SYSTEM

Fully Charge the Monitor before Use

1. Use the Type C cable of the baby monitor to connect the power adapter.
2. Plug the power adapter into a power outlet.
3. Connect the other end of the baby monitor’s Type C power cable to the Type C port on the monitor for charging.

• Turn On the Monitor: Press and hold the power button for 3 seconds.
• Turn Off the Screen{Sleep Mode) : Press the power button once.
• Turn Off the Monitor: Press and hold the power button for 3 seconds.

1. Attach the Thermometer /Hygrometer to the end of the baby camera’s power port.
2. Attach the Type C power cable of the baby camera to the other end of the Thermometer/Hygrometer.
3. Connect the other end of Type C power cable to the power adapter (SV 2A) then connect the power adapter to a power outlet.

Understand the Indicator Light

• Solid Blue: Power on and working properly
• Solid Red: System is initializing or rebooting
• Flashing Blue: Disconnected from the monitor
• Flashing Red: Pairing Mode, ready for setup
• Flashing blue and red alternately: Firmware upgrade in progress

Mounting the Camera {On the Wall Mount)

To mount the Baby Camera on the wall, follow the steps below:

Place the locating sticker against the wall and then mark the screw position at which drilling will be required.
Drill holes with a 6mm drill bit.

Align the holes on the mounting plate with those in the wall. Insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco. Fix the screws to fasten the mounting plate to the wall.

Align the grooves with the mounting plate and rotate the camera clockwise until it clicks into place.

CONNECTING THE CAMERA
TO YOUR PHONE {OPTIONAL}
Download the WUUK app from the App Store (iOS devices) or Google Play Store (Android devices).

Register an account if there is no existing account.
Go to the app homepage. Tap Add Device, and add the WUUK Baby Monitor to your WUUK app.

Follow the on-screen instructions to complete the setup.

CUSTOMER SERVICE
For troubleshooting, check the WUUK app >Account> Help Center for more reference and live chat with Customer Support agents if needed.

• Warranty : 12-month Limited Warranty
• Call Us: United States +1 415-881-5715
• Email Us : hello@wuuklabs.com
• WUUK Labs Corp. All rights reserved.

WUUK and WUUK Logo are trademarks of WUUK Labs Corp., registered in the United States and other countries. All other trademarks are the property of their respective owners.

SAFETY STATEMENT

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. This device must accept any interference received including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult dealer or an experienced radio/TV technician for help.

Declaration of Conformity

• When charging, please place the device in an environment that has a normal room temperature and good ventilation.
• It is recommended to charge the device in an environment with a temperature that ranges from s·c~2s·c.
• Please ensure to use only the charger offered by the manufacturer. Using unauthorized charger may cause danger and violate the authorization of the device and the guarantee article.

This charger is for indoor use only

IC RF Statement
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.

FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

HVIN: BA530 PMN : Baby Camera

ISED Statement
 This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

• This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
• This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>