ARG AROGYA 360 Foot and Calf Massager Instruction Manual

ARG AROGYA 360 Foot and Calf Massager

General Information and Safety Instructions

GENERAL INFORMATION & SAFETY INSTRUCTIONS

Read this manual thoroughly before first use, even if you are familiar with this type of product. The safety precautions enclosed herein reduce the risk of burns, fire, electric shock and injury when correctly adhered to. Keep the manual in a safe place for future reference, along with the completed warranty card, purchase receipt and carton. If applicable, pass these instructions on to the next owner of the appliance.
Always follow basic safety precautions and accident prevention measures when using an electrical appliance, including the following:

• Do not use it in dusty conditions.
• Do not drop the Foot and Calf Massager. Dropping or roughing use of the unit will make it damaged.
• Do not place near strong magnets or strong electric currents.
• When the Foot and Calf Massager is not in use, turn off and unplug from any power source.
• There are no user serviceable parts in the Foot and Calf Massager – do not attempt to repair, open or alter any components. In the case of improper usage or if you have opened, altered or repaired the product yourself, all guarantees are void.
• The supplier does not accept responsibility for additional or consequential damage other than covered by legal product responsibility.
• The supplier is not responsible for the end use of this product including any improper use or when used for purposes that are not specified.

Warnings

1. Read all instructions before operating the Foot and Calf Massager for the first time.
2. This appliance is intended to be used in household and similar applications such as:
   • staff rooms, offices and other working environments;
   • farm houses,
   • hotels, motels and other residential type environments;
3. Do not stand while using the Foot and Calf Massager, as excess weight on the internal mechanisms may cause damage. Do not use the appliance for other than intended or specified purposes.
4. Persons with larger than average foot or calf size may have difficulty or discomfort with use. It is recommended to stop using.
5. When using the Foot and Calf Massager, you should experience improved blood flow to foot and calf areas which may cause itchiness.
6. This appliance is not intended for use by persons with any kind of leg, foot or calf injury. Please consult a doctor before use with these conditions.
7. Only use the Foot and Calf Massager with 220V AC 50-60Hz. power supply.
8. To avoid electrical shock, do not place the cord, plug or Foot and Calf Massager in water or other liquids.
9. Do not operate appliance with wet hands or operate in a wet working environment.
10. Keep the Foot and Calf Massager and power cable away from heat sources and hot surfaces.
11. Always protect the power cable from undue flexing and wearing – do not allow the cable to hang off edge of the counter or table.
12. If the supply cord is damaged, do not use the product. Contact customer service for repair or replacement.
13. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of theappliance by a person responsible for their safety.
14. Do not leave your Foot and Calf Massager unattended when power is connected. It is not recommended to use the Foot and Calf Massager for longer than 30 minutes at a time.
15. Do not use this appliance with an external timer or separate remote-control system of any kind
16. Do not sit on the Foot and Calf Massager.
17. Do not use the Foot and Calf Massager if the fabric is torn or damaged

Features And Technical Specifications

Features

• 3 Foot Massage Settings
• 3 Calf Massage Settings
• 3 Vibration Settings
• Carry Handles
• Removable Covers
• Rubber Feet

Technical Specifications

Model Specification

• Voltage: 220V AC 50-60Hz
• Power: 80-110W
• Vibration Settings: 3
• Foot Massager Settings: 3
• Calf Massager Settings: 3
• Weight: 10.2kg
• Warranty: 1 Year

Assembly And Parts List

1. Leg Slots
2. Control Panel
3. Carry Handles (both sides)
4. Removable Covers
5. Rubber Feet
6. Power Connection
7. Power Plug

Getting Started

Before First Use

Remove any packaging material before using your Foot and Calf Massager for the first time.

• Do not setup the Foot and Calf Massager in the bathroom or any humid area.
• Ensure the Foot and Calf Massager is not exposed to direct sunlight for extended periods.
• The Foot and Calf Massager comes pre-assembled, so you can plug it for immediate using.

Navigating The Control Panel

Upper part: LCD Display show the current operation status
Below part: functional button

• ON/OFF Press the ON/OFF button to tun the unit ON/OFF
• FOOT Choose Foot Massage from Level 1 to Level 3.
• SHOCK Choose Vibration from Level 1 to Level 3.
• CALF Choose Calf Massage from Level 1 to Level 3.
• AUTO Amtomatic Massage Mode.
• HEAT Press the HEAT button to start heating function.
• TIMET Choose massage time from Smins to 30mins.

NOTE: When using the heat mode, allow a few minutes for the element to warm.

Instructions

Using your Foot and Calf Massager for the first time.

1. Power plugged in
2. Seated, place your legs into the slots.
   • WARNING: Do not stand when placing your feet in the unit.
3. Press the ON/OFF button to start operating. Select your desired setting on the control panel.
4. When you are finished using the Foot and Calf Massager, press the ON/OFF button once to turn off and allow the massage cycle to finish.

NOTE: The Foot and Calf Massager will automatically stand by mode after setting time 5-30 minutes

FAQ

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>