Brilliant 22273-05 Tempo Plus With Light 48 Inch AC Ceiling Fan Installation Guide

Brilliant 22273-05 Tempo Plus With Light 48 Inch AC Ceiling Fan

Product Information

Specifications:

• Model Name: TEMPO PLUS WITH LIGHT
• Code/Colour/Size:
  • 22273/05 – White 48″ (1220mm)
  • 22273/06 – Matt Black 48″ (1220mm)
  • 22273/13 – Brushed Chrome 48″ (1220mm)
  • 22279/06 – Matt Black 52″ (1320mm)
  • 22279/05 – White 52″ (1320mm)
  • 22279/13 – Brushed Chrome 52″ (1320mm)

Product Usage Instructions

Installation:

1. Unpacking:
   • Preparation: Check contents against the list provided.
   • Choosing A Suitable Location: Ensure a safe distance of 150mm from walls and at least 2.1m above the floor.
2. Mounting the Hanging Bracket:
   • Ensure no objects obstruct the blades and mount the fan so that the blade tips are at least 2.1m above the floor.
3. Electrical Connections:
   • The building cable should enter the canopy about 10-15mm from the terminal block ‘H’.
   • Connect the main supply cable to the terminal block ‘H’ and the Wall controller as per markings.
   • Use Brilliant’s easy-connect system to connect male and female connectors (A to B) and secure excess wiring inside the canopy.

Maintenance:

• Care & Cleaning: Regularly clean fan blades and housing with a soft cloth.
• Noise & Wobble: Check for unusual noises or wobbling; tighten any loose screws.
• Normal Wear & Tear: Monitor for any signs of wear and replace parts as needed.

Troubleshooting:

• Technical Data: Refer to technical specifications for troubleshooting guidance.
• Accessories & Spare Parts: Contact customer support for any additional accessories or spare parts needed.

FAQ:

• Q: Can I install the ceiling fan myself?
  A: It is recommended that the ceiling fan be installed by a Qualified Electrical Contractor to ensure safety and proper installation.

• Q: How do I balance the fan if it wobbles?
  A: Check and tighten any loose screws, ensure the fan blades are properly aligned, and use a balancing kit if necessary.

Congratulations on the purchase of your new quality Brilliant Ceiling Fan. Before first using it, it is most important that you read and follow the instructions in this Installation Manual, even if you feel you are quite familiar with this type of product. Find a place and keep this manual handy for future reference.

Model Name: TEMPO PLUS WITH LIGHT

Code

| Color|

Size

22273/05| White| 48” (1220mm)
22273/06| Matt black| 48” (1220mm)
22273/13| Brushed Chrome| 48” (1220mm)
22279/06| Matt Black| 52” (1320mm)
22279/05| White| 52” (1320mm)
22279/13| Brushed Chrome| 52” (1320mm)

IMPORTANT SAFEGUARDS

Read all instructions carefully, even if you feel you are quite familiar with this type of appliance.

When using electrical appliances, to reduce the risk of fire, electric shock, and/or injury, these basic safety precautions should always be followed:

1. This ceiling fan MUST be installed by a Qualified Electrical Contractor by the local regulations, and all local, state, and national electrical codes. Any alterations or additions to building wiring must be completed by a licensed electrical mechanic or person authorized by legislation to work on the fixed wiring of any electrical installation.
2. The ceiling fan must be connected to a 240V AC 50Hz power supply.
3. All electrical work must only be undertaken after disconnection of the power by removing fuses or turning off the circuit breaker, to ensure all pole isolation of the electrical supply.
4. The fan must be electrically Earthed.
5. The fan must be installed so that the blades are at least 2.1 meters above the floor.
6. The structure that the ceiling fan is connected to must be capable of supporting a weight of at least 45kg. The fixing must be able to support the moving weight of the fan and must not twist or work loose.
7. Make sure that the installation site will not allow the rotating fan blades to come into contact with any object and that there is a minimum clearance of 150mm (6”) from the blade tip to the wall or ceiling. Please note that the bigger this clearance is the better the airflow from your fan will be.
8. DO NOT use outdoors unless covered. Refer to Warranty terms for Alfresco use.
9. DO NOT connect the fan motor to a dimmer switch. This may damage the motor. Use ONLY the provided wall controller.
10. This appliance is not intended for use by young children or infirm persons without supervision.
11. Young children should be supervised to ensure that they DO NOT play with the appliance.
12. It is not recommended that ceiling fans and gas appliances be operated in the same room at the same time.
13. The fan must be turned off and stopped completely before reversing the fan direction. This will prevent any damage to the motor of the fan or controller (if installed).
14. Do not insert anything into the fan blades whilst they are spinning. This will damage the blades and upset the balance of the fan causing the unit to wobble.
15. After the fan is completely installed make sure that all base and fan blade fixings are secured and tightened to prevent any problems.
16. Because of the fan’s natural movement, some connections may loosen. Check the support connections, brackets, and blade attachments twice a year to make sure they remain secure. If any are loose, tighten.
17. A blade balancing kit is included. Ensure blades are balanced immediately after installation to reduce wobble and noise.
18. An all-pole disconnection incorporated in the fixed wiring is to be provided, such as an all-pole switch or a supply cord fitted with a plug.
19. If a remote control is installed, remove the wall controller.

IMPORTANT NOTE:
The important safeguards and instructions given in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution, and care are factors which cannot be built into any product. The persons caring for and using the unit must supply these factors.

OUR FANS ARE 80% PRE-ASSEMBLED STRAIGHT OUT OF THE BOX

Fast Installation – 3 Easy Steps

1. Install a mounting bracket and make wiring connections.
2. Hang the Fan, connect all wiring using Easy-Connector, and secure the canopy
3. Assemble the blades

SUGGESTED TOOLS NEEDED

UNPACKING

PREPARATION:

• Unpack your ceiling fan carefully, then remove all parts and components, and lay it on a cloth or soft surface to avoid damage. DO NOT lay the motor housing on its side, the housing may get damaged.
• Before commencing installation, check that all parts are included. NB: You may need to remove all foam packaging material to ensure there are no missing components.

CHOOSING A SUITABLE LOCATION:

• Ceiling fans should be installed in the middle of the room, with a safe distance of at least 2.1m from the floor, and 150mm from the wall.
• An extension rod may be required for rake ceiling installation.

INSTALLATION

CAUTION:
Before installing the fan, make sure you have turned OFF the electricity supply.

MOUNTING THE HANGING BRACKET

1. Secure the hanging bracket to the ceiling joist or suitable structure that is capable of carrying a load of at least 45kg, with the two long fixing screws provided. Ensure that at least 30mm of the screw is threaded into the support.
   NB: The fixing screws included are designed for use when the ceiling fan is secured onto timber joists. For all other surfaces, additional and suitable fixing screws for that surface will need to be purchased.
   NOTE: Ensure the building cable will enter the canopy close to the terminal block.

2. Make sure that the position of the installation will not allow the blades to come into contact with any object. The fan must be mounted so that the tips of the blades are at least 2.1 meters above the floor.

ELECTRICAL CONNECTIONS
The building cable should enter the canopy about 10-15mm from the terminal block. Connect the main supply cable to the terminal block ‘H’ and the Wall controller as per the marking on it. Ensure connections are firm. For your convenience, and to assist in easy installation, your ceiling fan is connected with Brilliant’s easy-connect system. Simply connect the male and female connectors (A to B), and then ensure all excess wiring is retained inside the ceiling canopy.

ATTACH BLADES

1. Insert the blade through the slots around the motor. Align the blade with the three holes, and secure the three screws through the opening exposed. If the holes do not align, the blade is upside down. The blade is designed to fit snugly, the screws should be vertical with the blade.
2. Tighten all blade screws from the bottom side evenly and securely to ensure quiet, wobble-free operation of the fan.
3. Tighten light housing with three screws

HANGING THE FAN

1. Carefully lift the fan, and place the down rod ball assembly into the mounting plate ensuring that the ball correctly locks into place.
2. Refer to the following section detailing ‘Electrical Connection’ on page 6 for details on how to wire this product correctly.
3. After the fan has been wired to the power supply, carefully position all excess cable inside the boundaries of the hanging bracket.

ATTACH CANOPY
Carefully slide the canopy up to cover the hanging bracket and ball joint, taking care not to damage any wires. Once in position, secure the canopy with the screws provided.

ATTACH GLASS DIFFUSER
To install the light diffuser, simply align the groove openings in the diffuser with the pips inside the housing and twist clockwise until secure.

BALANCING

• This fan includes a blade balancing kit. Upon initial installation, the balance kit should be used on the fan blades to reduce wobble.
• The balance kit includes instructions on how to perform the balancing procedure.
• Balancing the fan and reducing wobble will result in quieter operation and optimum performance.

REVERSE SWITCH
The ‘Summer/Winter’ switch should be in the forward position to make the fan rotate in an anti-clockwise direction during summer. In winter,, this switch should be reversed (move to UP position) so that the blades now move in a clockwise direction.

LIGHT FUNCTION

INSTALLING AND REPLACING LIGHT GLOBES:

1. Turn OFF the power to the fan.
2. Remove the glass diffuser by twisting anti-clockwise
3. This fan supports up to 2 x 40W Max E27 type globes (not included)
4. Attach the globes to the lamp holders, and make sure it is secure tightly.
5. After finishing, attach the glass diffuser back to the fan body.
6. Turn ON the power supply.

MAINTENANCE

CARE & CLEANING

• Periodic cleaning of your ceiling fan is the only maintenance required.
• Use a soft brush or lint-free cloth to avoid scratching the finish. Please turn off the electricity when you do so.
• Do not use water when cleaning your ceiling fan. It could damage the motor or the wood blades and create the possibility of an electrical shock.
• Do not use abrasive cleaning agents as they may damage the finish.
• The motor has a permanently lubricated ball bearing, and as such is maintenance-free.

NOISE
The manufacturer warranty covers actual faults that may develop, but NOT minor complaints, e.g. hearing slight noise from the motor in operation – ALL ELECTRIC MOTORS ARE AUDIBLE TO SOME EXTENT, more so, when the fan is operating at low speeds.

WOBBLE

• Ceiling fans are mounted very securely on steel brackets with rubber cushioning or with ball joints to allow free movement.
• Ceiling fans are designed to move during operation because they are not generally rigidly mounted – if they were, they could generate excessive ceiling vibration and stress on their mountings.
• Movement of a couple of centimeters is quite OK and does not suggest the fan will fall.
• Please note that all ceiling fans are not the same, even in the same model – some may move more or less than others.

NORMAL WEAR AND TEAR:
Threaded components working slightly loose or blade carriers even slightly bent due to vigorous cleaning or bumping can cause extra wobble and noise. THIS IS NOT COVERED UNDER WARRANTY but a little care and maintenance can reduce or prevent this problem.

RIPPLE CONTROL FILTER:

• In parts of Australia (NSW and QLD), the power company superimposes a signal voltage onto the main household voltage. This signal voltage is used to remotely control consumer’s electric water heaters and other devices throughout the surrounding area.
• Unfortunately, this signal can appear at the ceiling fan as a loud intermittent “hum”. If this noise is apparent please contact your local Electricity service provider on how they can assist to provide rectification, usually in the form of a mains supply ripple filter to filter out this signal.

TROUBLESHOOTING

TROUBLE

| PROBABLE CAUSE|

SUGGESTED REMEDY

---|---|---
Fan/Light will not start| A. Fuse or circuit breaker has blown.| A. Check main and branch circuit breakers
B. Loose wire connections to the fan.| B. Check line wire connections to the fan.
C. Speed controller not in the correct position.| C. Check the speed controller’s position.
Fan wobbles| ****

A. Fan blades are not horizontal to the ceiling.

| A. Re-tighten all screws on the blades. Do not make any adjustments by applying pressure up or down on the blades.
B. Blade screws are loose.| B. Make sure all screws are tightened.
C. Fan is not balanced.| C. Balance fan blade with balance kit.
Fan sounds noisy| A. Loose fan blades.| A. Retighten all screws on the fan.
B. Ceiling fan not secured against the ceiling.| B. Retighten all screws in the hanging bracket.
C. Incorrect speed controller.| C. Change the speed controller to the one supplied with the unit.
Mechanical noise| A. Fan has not settled in fully.| A. Allow at least 8 hours to settle in the period.
B. Blades not balance.| B. Balance the blades.
C. Hanging bracket or canopy screws are loose.| C. Tighten all screws.

TECHNICAL DATA

ACCESSORIES

Extension Rods| Loom Kit| Remote Kit
100550/05 (white), 100550/06 (black), 100550/13 (brushed chrome)| Included in the extension rod| 99999 or 99222
SPARE PARTS|
---|---
Blades| Wall Controller| Diffuser
22270SP051 (48” white), 22270SP131 (48”silver), 22270SP061( 48’’ black ）

22276SP0521 (52” white), 22276SP131 (52” silver), 22276SP061 （ 52’’ black）

| 20269| 100012SP001

WARRANTY

Please note, that this warranty voids any other warranties supplied with this product and complies with the new consumer guarantee requirements.

• The benefits conferred by this warranty are in addition to all implied warranties, other rights, and remedies in respect of the product, which the consumer has under Australian Consumer Law.
• The original purchaser of this Brilliant Ceiling Fan is provided with the following warranty subject to the Brilliant Warranty terms and conditions as found on the Brilliant website and the following conditions.
• Brilliant Lighting (Aust) Pty Ltd warrants this ceiling fan motor for 6 years from the date of purchase, the first 3 years are covered by an In-home warranty. All parts deemed defective in workmanship or materials will be replaced free of charge. Remote controllers, Wall controllers, and Light fittings are subject to Limited warranty status.

• Consumable items such as Batteries and Light Globes will not be covered by this warranty.
• This warranty is in addition to any other rights and remedies of the customer under any law. In applications not intended for household, personal, or domestic use, liability is limited to replacement or reimbursement of product only.
• The warranted use of fans outdoors is limited to Enclosed alfresco-like areas where conditions are similar to indoor installations.

The warranty conditions for fans installed in Enclosed Alfresco areas are as follows:

• The fan must be shielded from wind and rain (enclosed area, min. 1.5m from edge of eave/roof).
• The warranty will cover open circuit motor faults, and remote control faults if not related to outdoor exposure.
• The Warranty will not cover outdoor-related issues such as rusting, or failure caused by water, moisture, or wind.
• The Warranty will not cover the external appearance or finish of any part of the ceiling fan.
• The Warranty will not cover wooden blades. These are recommended only to be used indoors.

The warranty does not cover Ripple Control noise/interference (identified by a periodic or intermittent hum). This must be addressed with your energy service provider. The warranty does not cover noises or faults due to poor installation or failure to balance fans as per instructions. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if goods fail to be of acceptable quality and the failure does not amount to a major failure.

Any claim under this warranty must be made within the warranty period of the date of purchase of the product. To make a warranty claim please refer to the Warranty Claim Form on the Brilliant

• Website: www.brilliantlighting.com.au.

This warranty is given by:

• Brilliant Lighting (Aust) Pty. Ltd. ABN 37 006 203 694 956 Stud Road Rowville, VIC 3178
• Phone: 03 9765 2555
• Email: warranty@brilliantlighting.com.au.

MADE IN CHINA.

References

• brilliantlighting.com.au
• brilliantlighting.com.au/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>