TRIMS CVD1502W-SD Car Multimedia LCD Screen Instruction Manual

TRIMS CVD1502W-SD Car Multimedia LCD Screen

User Operation Manual

IN CAR MULTI-MEDAPLAYER WITH LCD TOUCH SCREEN DISPLAY BLUETOOTH,RADIO & MOBILE PHONE-LINKING

Wiring

MAIN MENU

The Mode icon in gray means the corre­sponding function is not ready or proper device have not been connected. Touch the corresponding Mode icon to enter playing mode.

Setup, to enter the Settings Menu.
Turn off TFT display.
TFT enter black mode touch any zone returns to TFT on.

Settings

Touch the icon to enter the Setup menu.
The Setup menu is included Time Settings, Audio Setting s, General Settings, Wallpaper Settings.

Time Settings
The Time Settings allow the user to set Date &Time.
Audio Settings
Below shown is the Audio Setting Menu.

Beep: set the Beep tone is ON or OFF. Reverse Vol: adjust the Vol value is 0-30.

EQ Settings

Balance/Fader:

• Loudness: set the Loudness is ON or OFF.
• Touch the” of Balance /Fader to tune for the driver and passenger preference.
• The value of Balance (Left12-Right 12) and Fader ( Front 12- Rear 12).
• Touch Reset to set both Balance and Fader to 0.

10-Band Equalizer
10 band of EQ tuning, slide the EQ bar to tune each band frequency level according to user preference.
Touch Reset to set all Band to.

Subwoofer

• Subwoofer Output: On/Off.
• Subwoofer Frequency: 50Hz/80Hz/120Hz /160Hz
• Subwoofer Level: -10~+10

Volume Control
Set the Main / BT Talking /Navi Noice default volume value.

General settings

Brightness: Adjust the screen’s brightness from 0-15.
Illumination Detect: On / Off.

Key Led:

• LED Auto: On/Off.
• ON: the Led color will change automatically. OFF: select required LED light color:
• White / Red/ Yellow /Blue/Green/Purple
• /Light Green.

BT:

• Rear Camera View: Normal/Reverse
• Parking Assist Guide: On/Off
• Parking Assist Guide Adjustment
• Touch “>to enter Parking Assist Guide
• Adjustment interface to show the below screen :

Select the adjust position and Touch to adjust. Touch Reset to resume the default

• Parking Assist Line.
• Language: Select the desired language.
• Driving Position : select the driver position is Left or Right.
• Drive Forbidden Watch Video:
• On /Off.

Serial & Version:

CarPlay & Android Auto

Reset Factory Data: Once selected, the unit will prompt to confirm reset to factory settings. Once confirmed the system will automatically reboot.

Wallpaper
User can select the preset wallpaper for prefer background.

Apple Carplay
Plug the iPhone (iPhone 5 or latter models, and IOS 7.1 or above) through the lightening cable to the USB port of the source unit. The iPhone will be shown the “CarPlay”. The source unit will enter the CarPlay interface, the APP that support the CarPlay feature will be displayed on the source unit as shown below. Touch the corresponding
APP can operate, touch button to go back the CarPlay interface.

CarPlay & Android Auto Siri
In Carplay mode, user can talk to Siri to control the CarPlay functions. Press to start the Siri function, or touch the 8 button for 2 seconds or the HOME button of iPhone. Now you can talk to Siri for playing music, I am going
Note: For Siri function in the source unit, the Micriphone has to be connected.

Android Auto Operations
Android Auto enables you to use functions of your Androd device convenient for driving. You can easily access route guidance, make calls, listen to music, etc. For details about Android Auto, visit
https://www.android.com/auto
or
https://support.google.com/and roi da uto.,Compatible Android devices
You can use Android Auto with Android devices of Android version 5.0 or later. Note: Android Auto may not be available on all devices and is not available in all countries or regions.
Operations:

1. Connect an Android device via USB terminal. To use the hands-free function, connect the Android device via Bluetooth. When an Android device compatible with Android Auto is connected to USB terminal, the device is connected via Bluetooth automatically, and the Bluetooth smartphon currently conected is disconnected.
2. Unlock your Android device
3. To enter Android Auto mode, touch Android Auto icon in the head unit screen. You can perform the operations of the Apps of the connected Android device.

Radio mode

Radio mode
Touch the Radio mode icon to enter Radio.

USB

Store a Station

1. Tune radio to desired station.
2. Touch and hold the one of the preset station for more than 3 seconds, then the preset button will be highlighted on the screen,and the preset station will be stored.

USB
Plug the USB , the USB icon will be colorful. Touch the USB icon to enter the USB playback mode. The source unit default the play the Audio in the USB device.

File List browsing
Touch to browse the folder and file list of the USB device.
You can select the multi-media type.

Video

Bluetooth Audio

Picture

Press to Zoom Out the picture.
Press to Zoom In the picture.

Bluetooth Audio
Touch the BT Audio icon to enter Bluetooth Audio playing mode. If the Bluetooth is connected, the music will be playing as following shown;

Bluetooth Audio Playback

Bluetooth Connect
If the Bluetooth is not connected, press Re­connect the paired phone or paring to pair the new device.

Bluetooth Pairing
Pairing mode screen will be shown as below:

Turn On the Bluetooth of the mobile phone or Bluetotth device, you can see the CAR-KIT, select the CAR-KIT for pairing and connection.

Bluetooth Phone
Touch the Phone icon in main menu to go to Phone mode. After the mobile phone is connected with the source unit via Bluetooth {HFP), user can through the source unit to make a phone call. Please note it needs to connect the microphone for phone call.

Make a Call

1. Touch the icon to enter below screen.
2. Using the keypad, touch 0-9,*,#, enter the phone number you wish to dial. If you input an incorrect number, touch the icon on the keypad to delete the incorrect number.
3. Once the correct number appears on the screen, touch the icon. To go to dialing interface.
4. To end the call, touch the icon on the screen.

Receive an incoming call
If the Phone is connected with the source unit via Bluetooth, when an incoming call, below screen will be shown:

Press to answer the incoming call.
Press into reject the incoming call.

Call Logs
Touch the icon to display the Call combined list.

Slide the bar at right side up and down to display a call logs up to 20 records.

Contacts
Touch the icon – to access the phone book of the connected mobile phone.
To make a call from the phonebook, simply touch the contact name.

BT Setup

• BT On /OFF, Power On or Off BT function.
• Auto Answer On /OFF, incoming call auto answer.
• Auto Loadpbk , On /OFF, when connectphone auto load phonebook on or off.
• Loadpbk , Manually load phone book.

AV IN

The Audio/Video source with RCA cable can through the source unit to play the Audio/ Video. Plug the RCA to the corresponding AN socket.
Touch the icon Audio /Video.

The Audio and Video will via the RCA cable to the source unit.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator  and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>