JAR SYSTEM REBAPL36 Quick-Sense USB-C Charging Retrofit

Product Information

Specifications

• Product Name: Quick-Sense USB-C Charging Retrofit for Anywhere AC Plus Cart
• Model: REBAPL36
• Designed in: USA
• Made in: China
• Ports: 12-Port Charging Hubs
• Includes: USB-C Cables, M5 Anti-Theft Screws, Torx Key T25, Mounting Brackets, Power Cord

Installation Instructions

Components

• Quick-Sense 12-Port Charging Hubs
• USB-C Cables
• M5 Anti-Theft Screws
• Torx Key T25
• Mounting Brackets
• Power Cord

1. Remove the center screws on both sides of each level of the cart body using the 4mm hex key.
2. Position the mounting brackets in the cart and secure them with screws.
3. Pass power cables through the cart to connect to the charging hubs.
4. Secure each charging hub to the brackets using M5 anti-theft screws and Torx key.
5. Plug in the power cables and connect devices for charging.

Product Usage Instructions

Quick Start

1. Connect the cart to a power source.
2. Plug in powered down devices.
3. Connected devices will automatically charge efficiently.
4. Connect/disconnect devices as needed.

LED Charging Port Indicator Lights:

Normal Operation
Connected devices will charge as fast and evenly as possible without drawing too much power. Refer to the LED indicator lights for the level of charge. Disconnect devices starting with green LEDs before blue LEDs to ensure proper operation.

Note: Use USB-C emulator cables for devices that cannot be directly connected to the charging port on the cart to prevent cable strain and damage over time.

FAQ

Q: Can I charge devices that do not have USB-C ports?
A: Yes, you can use USB-C emulator cables for device without USB-C ports. Contact JAR Systems for more information on compatible cables.

For Additional Support Call: 866.393.4202 or Email: Support@JAR- Systems.com

Quick-Sense USB-C Charging Retrofit for Anywhere AC Plus Cart
REBAPL36 Installation and User Guide

Version A

M00026

Last Modified 06/21/2024
For a copy of the most up-to-date manual, please contact a JAR Systems representative or visit:
JAR-Systems.com/Support

Installation Instructions

Components

1. Remove the center screws on both sides of each level of the body of the cart using the 4mm hex key and set them aside. This is where the retrofit kit mounting brackets will be secured to the cart body.

2. Position the mounting brackets in the cart. You must tilt the bracket as you slide it into the cart. Align the screw holes in the cart body with the holes in the brackets. Secure the bracket with the screws you removed in step 1.

3. Open the rear door of the cart to position the power cables for the charging hubs. Beginning with the daisy chain power cord, pass the female connector end through the right side and set it on the top bracket to connect to the charging hub in a later step. Pass the male connector through the left side of the center level and set it on the bracket. On the center level, pass one of the power cables through the right side and connect the other end to the auxiliary outlet on the bottom right side of the cart. Pass the second power cable through the bottom level on the right side and set it on the bottom bracket. Connect the other end to the auxiliary outlet on the bottom right side of the cart. Close the rear door and rotate to the front of the cart. Plug the daisy chain cord leading to the top bracket into one of the hubs and set the hub on the top bracket. Plug the other end of the daisy chain cord and the power cord leading to the center bracket into a second hub and set it on the bracket. Plug the power cable leading to the bottom bracket into the third hub and set it on the bracket.

4. Secure each of the charging hubs to the brackets using 2 M5 anti-theft screws and the T25 Torx key. Insert the screws into the holes from the beneath the bracket. Plug in the cart and connect your devices.

Quick Start

1. Connect cart to power source
2. Plug in powered down devices
3. Connected devices will automatically charge as efficiently as possible
4. Connect/disconnect devices any time

LED Charging Port Indicator Lights

Normal Operation

• Plug the power cable into a standard 15A outlet. LEDs will illuminate white to indicate the cart is connected to a power source.
• Power off devices fully before connecting them to the cart for charging.
• Connect the devices to the USB-C charging cables. Ensure that devices are placed in the cart so that the charging ports are as close as possible to the USB-C charging port on the cart.
• Incorrectly connecting devices can strain the cable over long periods of time and lead to damage.
• You may hear a clicking sound, and the LED lights will change color according to the power draw of the attached devices.
• The system will automatically limit power consumption by turning some of the USB-C ports off temporarily.

Refer to the device for the level of charge. Connected devices will charge as fast and evenly as possible, without drawing too much power.

• To remove devices from the carts with the greatest level of charge first, disconnect devices with the green LEDs first before you disconnect devices with the blue LEDs.
• Devices that do not feature a USB-C charging port can be charged using USB-C emulator cables.
  (Not Included, contact JAR Systems for more info)

Trouble-Shooting

Always start troubleshooting with a simple reboot
Unplug and replug the power cord. When the cart is connected to power, the LEDs will change color based on the power draw of connected devices (see light indication).

Single Port or Device Issue
Ensure that both of the USB-C cable ends plug into the cart and the device correctly.
If there is still no charge, disconnect the device from that port (A) and plug into another port (B). If it is still not charging, it may be an issue with the device.
If charging begins when using port (B), exchange the cable from port (B) to port (A). If it begins to charge, the cable (A) is defective and will need to be replaced.

Entire Charging Hub/Shelf Issue
Check the back of the charging hub to see if the cart’s power cable is plugged in and connected correctly.
When the cart is powered back on, the LED lights will begin to illuminate.

Remove/Replace USB-C Cables
Each cable lock may be secured with up to three screws. Remove all screws with the supplied Torx key. Remove the cable lock. Remove the screws securing the hub to the bracket to slide the hub forward and provide additional clearance. Unplug the cables from the USB-C ports and route them through the cable track. Reverse the process to replace a cable.

Warnings

• Power down all devices prior to connecting them to the hub for charging.
• Keep away from moisture and harsh chemicals. Do not place any liquids near the charging cart.
• Any electrical equipment must be used by an adult or with adult supervision.
• Do not connect unsupported items to the cart or use for any purpose other than its intended use.
• Do not attempt to obstruct any ventilation openings or dismantle, open, or modify the system in any way.
• Do not sit or stand on the cart or charging hubs.
• Do not use an extension cable or daisy-chain to any other devices.
• Not intended for operation at altitudes greater than 2000 m or 6561 ft above sea level and should not be used in extreme temperatures. For indoor use only.

Disclaimer
Failure to read, thoroughly understand, and follow all instructions can result in serious personal injury, damage to equipment, or voiding of factory warranty. Since the use of this information, the equipment connected, and the conditions by which any JAR Systems product is used is beyond the control of JAR Systems, it is the obligation of the owner and/or user to determine the correct and safe use of any equipment and product. To the extent that the law permits, any liability which may be incurred as a result of the use or future use of a product manufactured or sold by JAR Systems is limited to the cost of repairing or replacing the failed product or component at the discretion of JAR Systems either within, or outside of warranty periods, and does not extend to any loss or damage which may be caused as a consequence of misuse or failure of the equipment, product or the information contained herein. JAR Systems shall not in any event be liable for economic loss of profits, indirect, special, bodily injuries or consequential damages. Specifications and images are for illustration purposes only. Final product may differ and is subject to change without notice.

Warranty

This product comes with a warranty that covers any defects in material or workmanship and extends to the original consumer of the product only. JAR Systems, LLC will replace the product with a new or refurbished product, repair the product, send replacement parts, or refund the purchase price of the product, at JAR Systems, LLC’s discretion. This warranty does not cover accidental damage, unreasonable use, neglect, tampering or other causes not arising from defects in material or workmanship.
Any implied warranties last only as long as the warranty periods listed above except where state law does not allow limitations on how long an implied warranty lasts. This includes but is not limited to the implied warranties or merchantability and fitness. JAR Systems, LLC’s responsibility is limited to the actions listed above and nothing else.
This warranty does not cover, and JAR Systems, LLC will not be responsible for, any damages due to loss of use of the product, or any other costs or expenses incurred by you or anyone else who uses the product, whether due to defects, breach of contract, negligence, strict liability or otherwise. JAR Systems is not liable for any indirect, special, incidental or consequential damages related to the product or this warranty. Some states do not allow exclusions or limitations on consequential or incidental damages, so these limitations or exclusions may not apply.
This warranty gives you specific legal rights and you may also have other rights that vary from state to state. This warranty is governed by the laws of Florida, excluding its conflict of laws principles, unless your state requires that its law be used. Contact JAR Systems for information on the length of warranty on your product(s).

For Additional Support Call: 866.393.4202 or Email: Support@JAR- Systems.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>