behringer BOD400 Authentic Tube Sound Overdrive Effects Pedal User Manual
- July 23, 2024
- Behringer
Table of Contents
behringer BOD400 Authentic Tube Sound Overdrive Effects Pedal
Product Information
Specifications
- Product Name: BASS OVERDRIVE BOD400
- Type: Authentic Tube-Sound Overdrive Effects Pedal
- Version: 3.0
Product Usage Instructions:
Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Use only attachments/ accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatuscombination to avoid injury from tip-over.
- Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you cantake your waste equipment for recycling, please contact your local city office, or your household waste collection service.
- Do not install in a confined space, such as a book case or similar unit.
- Do not place naked flame sources, such as lighted candles, on the apparatus.
BASS OVERDRIVE BOD400
Music Tribe accepts no liability for any loss which may be suffered by any
person who relies either wholly or in part upon any description, photograph,
or statement contained herein. Technical specifications, appearances and other
information are subject to change without notice. All trademarks are the
property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake,
Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston
Microphones and Coolaudio are trademarks or registered trademarks of Music
Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2024 All rights
reserved.
DESCRIPTION
Thank you for showing your confidence in us by purchasing the Behringer BASS
OVERDRIVE BOD400. This high-quality effects pedal is specifically designed for
bass applications. Thanks to its high-performance features you will achieve
tube-like distortion, smooth sustain and super fat tone with maximum punch
.
Controls
- The LEVEL control adjusts the output level.
- The HIGH control allows you to boost/cut the high-frequency range.
- The LOW control allows you to boost/cut the low-frequency range.
- Use the GAIN control to adjust the amount of overdrive.
- With the BAL(ance) control you can adjust the amount of the dry direct signal and the effect signal.
- The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.
- Use the footswitch to activate/deactivate the effect.
- Use this ¼” TS IN connector to plug in the instrument cable.
- The ¼” TS OUT connector sends the signal to your amp.
Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included). The BATTERY COMPARTMENT is located on the bottom. Open the lid to install or replace the 9 V battery.
- The BOD400 has no on/off switch. As soon as you insert the jack into the in connector, the BOD400 begins running. When not using the BOD400, remove the jack from the in connector. This extends the life of the battery.
The SERIAL NUMBER is located on the bottom.
Safety Instructions
Do not use near water, or install near heat sources. Use only authorized
attachments/accessories. Do not service product yourself. Contact our
qualified servicing personnel for servicing or repairs, especially when power
supply cord or plug is damaged.
Limited Warranty
For the applicable warranty terms and conditions and additional information
regarding Music Tribe’s Limited Warranty, please see complete details online
at community.musictribe.com/support. Batteries (battery pack or batteries
installed) shall not be exposed to excessive heat such as sunshine, fire or
the like.
WARNING
- As with all small batteries, the batteries used with this product should be kept away from small children who still put things in their mouths. If they are swallowed, promptly call your local poison control center.
- Always purchase the correct size and grade of battery most suitable for intended use.
- Replace all batteries of a set at the same time.
- Clean the battery contacts and also those of the device prior to battery installation.
- Ensure the batteries are installed correctly with the regard to polarity (+ and -).
- Always remove battery if consumed or if product is to be left unused for a long time.
- Replacement of a battery with an incorrect type that can defeat a safeguard! Replace only with the same or equivalent type!
- Risk of fire or explosion if the battery is replaced by an incorrect type.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
- Attention should be drawn to the environmental aspects of battery disposal.
Correct Disposal
Properly dispose of the product to contribute to the efficient use of natural
resources. Contact local authorities or waste collection services for
recycling information.
Product Placement
Avoid installing the product in confined spaces or near flame sources like
candles to prevent overheating or fire hazards.
Behringer is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
Behringer
BASS OVERDRIVE BOD400
- Responsible Party Name: Music Tribe Commercial NV Inc.
- Address: 122 E. 42nd St.1, 8th Floor NY, NY 10168, United States
- Email Address: legal@musictribe.com
BASS OVERDRIVE BOD400
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmfulinterference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by Music
Tribe can void the user’s authority to use the equipment.
Hereby, Music Tribe declares that this product is in compliance with
Directive 2014/30/EU,
Directive 2011/65/EU and Amendment 2015/863/EU,
Directive 2012/19/EU, Regulation 519/2012
REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Gammel Strand 44, DK-1202 København K, Denmark
UK Representative : Music Tribe Brands UK Ltd.
Address: 8th Floor, 20 Farringdon Street London EC4A 4AB, United Kingdom
Frequently Asked Questions (FAQ)
Q: Can I use the BASS OVERDRIVE BOD400 with other instruments besides bass
guitars?
A: The BASS OVERDRIVE BOD400 is designed specifically for use with bass
guitars and may not provide optimal performance with other instruments.
Q: How do I adjust the overdrive effects on the BASS OVERDRIVE BOD400?
A: To adjust the overdrive effects, use the control knobs provided on the
pedal. Experiment with different settings to achieve your desired sound.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>