TORVA RV Sink V03 Undermount Kitchen Sink Installation Guide

TORVA RV Sink V03 Undermount Kitchen Sink

Please keep the box and packaging materials until your product is completely installed. If you have any questions or problems. Please contact our Customer Service Team:
PLS DO NOT RETURN TO STORE

Notice

• Inspect the sink prior to installation to make sure that it has not been damaged during shipping.
• Read all instructions and ensure you have all tools, parts, and equipment necessary for a safe installation.
• Use the cut-out template provided.
• To avoid the risk of personal injury, wear safety glasses and cut resistant gloves with non-slip grip when cutting.

Warranty

• 1o years Limited Warranty
• Torva warrants the structure and finish of the Kitchen Sink to be free from defects in material and workmanship under normal usage for the original purchaser resides in the residence in which the sink was Kitchen Sink was first installed.
• 2 years for PVD Nano coating.
• 1 year for the accessories.

Commercial Warranty

• 1 year to commercial purchasers of products used in industrial, commercial and business applications.

Not Covered

• This warranty does not cover any free gifts included with purchase
• This warranty does not cover damage resulting from neglect, misuse (including use for an unintended application),abuse, carelessness,accident, hard water or mineral deposits, exposure to corrosive materials, improper maintenance, alteration of the product, or failure to follow care, cleaning or installation instructions enclosed with your Product.
• We recommends that all products be installed by a fully licensed and insured trade professional with experience in the installation of bathroom and/or kitchen manufactured goods.

Cleaning and Care Instructions

• Clean regularly with clean water and/or a mild detergent applied with a soft cloth or sponge. Rinse thoroughly and towel dry after every use to prevent water spots and mineral deposits from building up on the surface of the sink. Deep clean once a week with an approved cleanser and a soft cloth or sponge rather than an occasional aggressive single cleaning-be sure to rub in the direction of the finish lines. Cleaners should state approved or suitable for stainless steel.

Do’s And Don’ts

• Do regular routine cleaning rather than an occasional aggressive single cleaning.
• Only use propriety brands of cleaners that state” SUITABLE STAINLESS STEEL”
• Do not leave low-carbon steel or iron kitchenware in the sink.
• Do not use coarse abrasive powders, metallic scourers such as steel wool or brushes with metal bristles.
• Do not leave standing solutions of chlorine bleach and water in the sink
• Do not allow liquid soap or other cleansers to dry on the surface of the sink.
• Do not leave food with high-salt content such as pickles, bearnaise sauce or mustard in the sink.

Installation Instructions

To avoid the risk of personal injury, wear safety glasses and cut resistant gloves with non-slip grip when cutting.

• Safety Goggles

• Cut Resistant Gloves

• Caution

Determine Reveal Type

• Cut along the line of the paper template for your desired reveal type.

• Undermount Flushed/Zero Reveal

• Top mount Drop-in Sink

• (If you want to install it as drop-in sink, PLS use the outline of template.No mounting clips. It can only be installed with sealant.)

Cut Opening

The template should be placed on the counter in the designated sink installation area. It is important to consider the positioning of cabinet doors and panels to ensure compatibility with the sink installation.

Trace the inside of the template with a pencil. Remove the template from the countertop.

Using the drill, make a small starting hole on the inside of the cutting line.

Using the jigsaw, trim the inside of the cutting line.

Set up Mounting Brackets

Turn countertop over and align sink with countertop.

Determine location for mounting brackets. About 1 /2″ (13mm) from the edge of sink.

Drill Hole in Countertop

Drill 3/8″ diameter x 1 /2″ ( 1 Omm*l 3mm) deep hole in the countertop.

Install expansion screw

Hammer the expansion screw into drilled holes

Secure Sink to Countertop

Apply silicone-based sealant (not included) around the rim of the sink.

Place the sink upside down, aligned with the cutout hole on the countertop and press firmly.

Attach Mounting Hardware

Attach mounting hardware to secure bowl.

Allow sealant to set for 30 – 60 minutes, and the flip the counter.

Remove excess silicone-based sealant.

Install Drain

Install faucet

Install the braided hose.

Install the spout and main body of the faucet.

Customer Support

North America: support@torva.com
Europe: torva.eu@torvausa.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>