Yongfengwang YFW-W011-B Magnetic Wireless Car Charger Instruction Manual
- July 22, 2024
- Yongfengwang
Table of Contents
Yongfengwang YFW-W011-B Magnetic Wireless Car Charger
Product Information
Specifications:
- Name: Magnetic Wireless Car Charger
- Model: YFW-W011-B
- Material: Zinc Alloy, ABS+PC
- Input: 5V/3A, 9V/3A
- Output: 5W/7.5W/10W/15W
- Country of Origin: China
Product Usage Instructions
-
Installation
Attach the magnetic ring to your phone if you have a non-magsafe case. Connect the Type C cable to the charger. -
Mounting in Car
Remove the bottom sticker from the charger and fasten the bracket to the center console of your car. Allow it to set for 24 hours before use. -
Charging Your Phone
The charger is specially designed for the iPhone 15/14/13/12 series. It has a built-in magnetic ring and strong suction force to securely hold your phone in place for charging. -
Stand Compatibility
The stand is compatible with wireless charging and can be used to charge your mobile phones conveniently.
FAQ
Q: Can this charger be used with non-Apple devices?
A: While it is specially designed for the iPhone series, it may work with
other devices that support wireless charging, but optimal performance is
guaranteed for the iPhone 15/14/13/12 series.
Product List
Instructions for Use
- Remove the sticker and fasten the bracket to the center console for 24 hours before use.
- Specially Designed for iPhone 15/ 14/13 /12 Series. Built-in magnetic ring and the strong suction force can closely fit the phone.
- Both the handset and the base can be angled by rotating them 360°.
- The stand is compatible with a wireless charger and can be used to charge mobile phones.
Specifications
- Name: Magnetic Wireless Car Charger
- Model: YFW-W011-B
- Material: Zinc Alloy, ABS+PC
- Input: 5V=3A=9V=3A
- Output: 5W/7.5W/10W/15W
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Made in China.