AEX WM 563 Surface Mounted Wall Loudspeaker Owner’s Manual
- July 22, 2024
- AEX
Table of Contents
AEX WM 563 Surface Mounted Wall Loudspeaker
Product Information
Specifications
- Product Name: WM 563 Surface Mounted Wall Loudspeaker
- Rated Input: Multiple tapping line-matching transformer for 70 V or 100 V line distributed speaker system
- Rated Impedance: Not specified
- Maximum Power: Not specified
- Frequency Response: Not specified
- Sensitivity 1W @ 1m: Not specified
- Coverage Angle (1kHz, -6dB): Not specified
- Speaker Component: 120 mm dynamic full range loudspeaker component
- Material & Finish: Fine metal mesh cover at the front baffle
- Dimensions: 173 mm (W) x 260 mm (H) x 65 mm (D)
- Weight: Not specified
Product Usage Instructions
The WM563 Surface Mounted Wall Loudspeaker is designed for installations in
areas without a false ceiling, such as stairwells or rooms with concrete
ceilings.
To install the loudspeaker, follow these steps:
- Choose the mounting orientation (horizontal or vertical).
- Mount the loudspeaker on the wall using appropriate mounting hardware.
- If needed, tilt the loudspeaker for closer sound projection.
- Ensure the loudspeaker is securely mounted to prevent unauthorized removal.
Frequently Asked Questions
-
Can the WM563 loudspeaker be used outdoors?
The WM563 loudspeaker is designed for indoor use. Outdoor use may expose the unit to weather conditions that could affect performance and durability. -
What is the recommended amplifier power for the WM563 loudspeaker?
The recommended amplifier power for the WM563 loudspeaker is not specified in the user manual. It is advisable to consult with a professional audio technician for optimal setup. -
Can the WM563 loudspeaker be painted to match the wall color?
Painting the loudspeaker may affect its acoustic performance and is not recommended. It is best to keep the original finish for optimal sound quality.
INTRODUCTION
- The WM563 Surface Mounted Wall Loudspeaker is designed for a wide range of applications. The unit is ideally installed in areas without a false ceiling such as in stairwells and rooms with concrete ceiling.
- Utilising a 120 mm dynamic full range loudspeaker component, the WM563 provides excellent speech and music reproduction even under high ambient noise conditions. Its vented enclosure is designed to enhance the sound quality of the unit. The unit comes fitted with a fine metal mesh cover at the front baffle for improved aesthetics and better protection.
- The WM563 comes with a multiple tapping line-matching transformer, suitable for 70 V or 100 V line distributed speaker system. The loudspeaker can be mounted horizontally or vertically without visible mounting screws and also tilted for closer sound projection. The enclosure is designed for permanent installation to prevent unauthorised removal of the unit.
- 120 mm dynamic full range loudspeaker component, providing clear undistorted sound quality.
- Horizontal or vertical mounting and a tamper-proof mounting design which completely eliminates front visible mounting screws.
- Built-in audio line matching transformer with multiple impedance choice of 6.7 kΩ, 3.3 kΩ and 1.7 kΩ, suitable for both 70 V and 100 V line distributed speaker system.
- A low-profiled enclosure design with a fine metal mesh cover makes the unit aesthetically pleasing.
Technical Specification
| WM 563
---|---
Rated Input| 100V : 6 W (6 – 3 – 1.5 W)
70V : 3 W (3 – 1.5 – 0.75 W)
Rated Impedance| 1.7 kΩ (1.7 – 3.3 – 6.7 kΩ)
Maximum Power| 9 W
Frequency Response| 110 Hz – 20 kHz
Sensitivity 1W @ 1m| 92 / 100 dB
Coverage Angle (1kHz, -6dB)| 70 °
Speaker Component| 120 mm Dynamic Full-range Loudspeaker
Certified| EN 54-24:2008
Material & Finish| Enclosure: ABS, white
Grille: Aluminium Mesh, white
Dimensions| 260 x 173 x 65 mm (W x H x D)
Weight| 0.8 kg