ITC 69307 Oval Courtesy Light Instruction Manual
- July 21, 2024
- ITC
Table of Contents
ITC 69307 Oval Courtesy Light Instruction Manual
INSTALLATION INSTRUCTIONS
PARTS NEEDED
| | |
Courtesy Light| Mounting Screws| Power Drill| Wire Nuts (not provided)
Safety Instructions
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- Light is rated for interior installation only, do not install in wet locations.
- Operating Voltage: 10 – 14V DC
Determine where your LED light fixture will be in- stalled. Mark the location
of the screw holes. Drill a hole for the wires and screws.
Use the wiring diagram below to wire the light to the units power. Test the light
Single Color Wiring
RGBW Wiring
Feed the wires through the hole and screw the back nut onto the fixture. Snap bezel onto the light.
3030 Corporate Grove Dr.
Hudsonville, MI 49426 Phone: 616.396.1355
itc-us.com
For warranty information please visit www.itc-us.com/warranty-return-policy
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>