1-053-314 MySentio Remote Instruction Manual
- July 22, 2024
- MySentio
Table of Contents
- 1-053-314 MySentio Remote
- Product Information
- Product Usage Instructions
- FAQ
- About this instruction manual
- Product description
- Installation and connection
- Commissioning
- Operation
- Maintenance
- Disposal
- Technical data
- ABOUT COMPANY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
1-053-314 MySentio Remote
Product Information
Specifications:
- Product Name: MySentio Remote
- Model Number: 1-053-314 / S-WIFI02
- Language: English
- Version: 09/22
- Ident No.: 1-053-314
Product Description:
The MySentio Remote allows you to start the sauna or steam generator via
devices such as smartphones and tablets using the MySentio app in a local
network (WiFi).
Scope of Delivery:
- MySentio Extension Box
- MySentio WiFi
- 2 pc. 1 m Ethernet cable, 8-pin RJ45
- Installation material
- Assembly instructions
Optional Accessories:
- Door sensor system (1-052-722 / SAB00102)
- Door sensor set (1-052-723 / SAB00103)
- Safety shutdown (SFE-xxxxx)
- Power supply LED 40 W / 24 VDC (1-052-972 / LED-PWS-24-40)
Product Features:
The MySentio Remote is compatible with various sauna control units such as
wave.com4, SGH, HGD, home.com4, Pro B2, Pro B3, Pro C2, Pro C3, Pro D2, Pro
D2i, Pro D3, and Pro D3i.
Product Usage Instructions
Installation and Connection:
- Secure the WiFi module near the sauna control unit within the range of its network using the provided screws.
- Connect Sentiotec WiFi to the sauna control unit using the 8-pin Ethernet cable according to the provided diagrams.
Important Notes:
Work should only be carried out when the power has been disconnected.
Ensure to route data cables separately from other mains cables and control
cables to prevent signal interference. Protect cables with only one layer of
insulation using a conduit.
Precaution:
Install the app and input settings before switching on the sauna control
unit to prevent damage to the device.
FAQ
-
How do I download the MySentio app?
The MySentio app can be downloaded for free from the Google Play Store for Android devices and from the App Store for iOS devices. -
How long is the subscription free for?
The subscription is free for 3 years, after which fees may apply. -
Can I use the MySentio Remote with any sauna control unit?
The MySentio Remote is compatible with specific sauna control units listed in the product features section of the manual.
About this instruction manual
Read these instructions for installation and use carefully and keep them
within reach of the device. This ensures that you can refer to information on
safety and operation at any time.
These installation and operating instructions can also be found in the
downloads section of our website:
www.sentiotec.com/downloads.
Product description
Scope of delivery
- MySentio Extension Box
- MySentio WiFi
- 2 pc. 1 m Ethernet cable, 8-pin RJ45
- Installation material
- Assembly instructions
Optional accessories
- Door sensor system (1-052-722 / SAB00102)
- Door sensor set (1-052-723 / SAB00103)
- Safety shutdown (SFE-xxxxx)
- Power supply LED 40 W / 24 VDC (1-052-972 / LED-PWS-24-40)
Product features
The MySentio Remote allows you to start the sauna or steam generator via de-
vices such as smartphones and tablets. This is done using the MySentio app in
a local network (WiFi), which is available free of charge for Android (Google
Play Store) and for iOS (App Store). The subscription is free of charge for 3
years, after which fees may apply.
Compatible sauna control units:
- wave.com4 11 kW (1-049-633 / WC4-B-11)
- SGH (1-050-578 / SGH-45; 1-050-579 / SGH-60; 1-050-580 / SGH-90; 1- 050-581 / SGH-110; 1-050-582 / SGH-150)
- HGD (1-047-553 / HGD45; 1-047-558 / HGD60; 1-047-559 / HGD90; 1- 047-560 / HGD110; 1-047-561 / HGD150)
- home.com4 (1-040-275 / HC4-B; 1-040-276 / HC4-W)
- Pro B2 (1-015-455 / PRO-B2)
- Pro B3 (1-015-457 / PRO-B3)
- Pro C2 (1-015-448 / PRO-C2)
- Pro C3 (1-015-451 / PRO-C3)
- Pro D2 (1-041-288 / PRO-D2)
- Pro D2i (1-041-291 / PRO-D2I)
- Pro D3 (1-041-293 / PRO-D3)
- Pro D3i (1-041-295 / PRO-D3I)
Installation and connection
Work may only be carried out when the power has been disconnected. During
installation, observe the technical data on Page 12.
ATTENTION!
Interference can impair signal transmission
- Route all data cables separately from other mains cables and control cables.
- Protect cables with only one layer of insulation by using a conduit (double insulation).
- Secure the WiFi module 1 somewhere near the sauna control unit and within the range of its network (WiFi) using the screws provided.
- Sentiotec WiFi is connected to the sauna control unit using the 8-pin Ethernet cable in accordance with the following diagrams:
ATTENTION!
Damage to the device!
Installation of the app and input of the settings (see “5. Operation” and “4. Commissioning”) must be completed before the sauna control unit is switched on.
Mounting MySentio Wifi and Remote
Connecting MySentio Remote
- Connection via terminals: the optional power supply unit is required for the power supply of the MySentio Extension Box OR
- connection via RS485 socket
ATTENTION!
Damage to the device!
The MySentio Remote must never be directly connected to the router.
Connection to wave.com4 11 kW
When connecting the safety shut-off/door sensor, follow the instructions of
the respective device
Connection to steam generator SGH and HGD
In the settings, the “Selection of remote start function” function must be set
to I-O
Connection to home.com4
Make the setting in the technician menu under menu item Mode RS1.
Connection to Pro series (Pro B2/3, Pro C2/3, Pro D)
- 4 Connection to S/B….Remote start of sauna operation / user program 1 Connection to C/B….Remote start of combination mode / user program 2
- 5 Safety shut-off/door sensor
When connecting the safety shut-off/door sensor, follow the instructions of the respective device
Commissioning
To activate remote start, refer to the operating instructions for the respective control unit.
-
Download the “MySentio” app onto your smartphone or tablet
- Open the app and sign up.
- Following the instructions provided in the app.
-
Signing up (Fig. 1–3):
Complete all fields and make a note of the email and password you use.
In case you have forgotten your password, simply enter the email address you used when you registered. You will then be given instructions on how to change the password. -
Add a new device: (Fig. 4–5):
- Select your device and tap the switch below it.(Fig. 6)
- Connect the WiFi to the smartphone by pressing the pairing button. (Fig. 7)
- Rename the device and wait until the app has finished loading. (Fig. 8)
- Enter the serial numbers of your devices. (Fig. 9)
Operation
Home menu
- Devices – switch between devices or add new devices.
- Settings – see page 10
- Status – status display (standby, on, off)
- Oven – oven on/off
- Devices – back to the Home menu 6 Profile – see page 11
The MySentio Remote can only switch the heater on/off. (NO colour light, user program, light, etc.)
DANGER!
Make sure that no flammable objects are ever left on the sauna heater when the sauna cabin is put into operation.
Settings
- Device settings – see 5.3.
- All off – switches off all switched on functions and consumers at once.
Device settings
- Time zone – selection of the relevant time zone
- Reconfigure WLAN – configure WLAN connection of the Wifi module
- Firmware updates – suggests new app versions.
- Info – query information, such as: software version, device type, etc.
- Rename – rename the device in the app.
- Remove – remove the device from the app.
Device settings
- Profile – you can change the following information:
- First name
- Last name
- Email address
- Remove profile
- Language – select language
- GTC – general terms and conditions
- Privacy policy – data protection guidelines
- Licence agreement – end user licence agreement
- Licences – open source licences
- Logout – log out of your profile
- Version – current version of the app
Maintenance
The device is maintenance-free. An internet connection is used to update it automatically.
Disposal
- Dispose of packaging materials in accordance with the applicable waste disposal regulations.
- Used devices contain reusable materials as well as hazardous substances. Therefore, do not dispose of your used device with household waste, but do so in accordance with the locally applicable regulations.
Technical data
MySentio Extension Box
- Ambient conditions
- Ambient temperature : -0 °C to +70 °C
- Protection class (protected against splashing water): IP65
- Minimum requirement WiFi 2.4 GHz: 1 Mbit
- Control unit
- Dimensions: 85 x 85 x 37 mm
- Operating voltage : 24 V DC max. 3 W
- Switching capacity: max. 250 V 4 A
- Connection cables
- Power supply via screw terminal / Ethernet cable: 24 V DC / 0.1 A
MySentio WiFi
- Ambient conditions
- Ambient temperature: -0 °C to +70 °C
- Protection class (protected against splashing water): IP 20
- Minimum requirement WiFi 2.4 GHz: 1 Mbit
- Control unit
- Dimensions: 83 x 56 x 24.5 mm
- Operating voltage: 24 V DC max. 3 W
- Connection cables
Power supplied by Ethernet cable: 8-pin RJ45 max. 3 m
Problem solutions are available in the MySentio Wifi instruction manual under the following link: www.sentiotec.com/de/downloads/bedienungsanleitungen
ABOUT COMPANY
- CENTRAL EUROPE
- sentiotec GmbH | Division of Harvia Group |
- Wartenburger Straße 31,
- A-4840 Vöcklabruck
- T +43 (0) 7672/22 900-50
- F -80
- info@sentiotec.com
- www.sentiotec.com
- GLOBAL
- HARVIA
- P.O. Box 12, Teollisuustie 1-7,
- 40951 Muurame, FINLAND
- T +358 207 464 000
- harvia@harvia.fi
- www.harvia.fi
- RUSSIA
- Адрес уполномоченного лица:
- ООО «Харвия Рус»
- 196006, Россия.Санкт-Петербург г,
- пр-кт Лиговский, д. 266, стр. 1, помещ.
- 2.1-Н.50 | ОГРН 1157847200818
- T +78123258294
- spb@accountor.ru