PoKeMoN P1 Bluetooth Earphones Instruction Manual
- July 23, 2024
- POKEMON
Table of Contents
PoKeMoN P1 Bluetooth Earphones
IMPORTANT INFORMATION
Please read this instruction carefully before using the product and keep it
safe
©Nintendo,Creatures,GAME FREAK.TV Tokyo,ShoPro,JR Kikaku. ©Pokemon.
TM,®, and character names are trademarks of Nintendo.For sale in China only.
Summary
TWS wireless Bluetooth headset supports mobile phones, tablets and laptops Bluetooth devices such as computers.
How to match the device
- When using for the first time, open the cover of the charging compartment, open the Bluetooth matching search of the mobile phone, click the Bluetooth matching name searched on the mobile phone: P1 , and select it to complete the matching.
- After there is matching record, the cover will be automatically connected {the Bluetooth of the mobile phone is on), and it is no need for manual matching search.
- Note: if the indicator light of the charging compartment is not on, please use the Type-C cable to charge the charging box, and the green light flashes.
Function Overview
Function
Power-on
When the cover is opened, the headset will be power on automatically.
Power-off
Put the headset back into the charging box and it will be power off
automatically when the cover is closed.
Connection back
After opening the cover, it is automatically connected back to the design of
the last connection.
-
Call rejection: Long press the left/ right ear for 2 seconds, or reject the call with the mobile phone.
-
Answer/ end : click the left/ right ear, or answer the call with your mobile phone.
-
Pause/ play: click the left/ right ear to pause/ play music.
-
Switch between previous and next track:
previous track: double click the left ear touch area.
Next track: double click the right ear touch area.
-
Volume up and down:
Volume-: three clicks on the left ear touch area.
Volume+: three clicks on the right ear touch are.
-
Voice assistant: long press the left/ right headphones for 2 seconds to start the voice function.
Charge the headset
- Put the earphone back into the charging compartment and close the cover to charge automatically. The white light in the charging compartment is long on.
- When the power of the headset is too low, the headset will have a prompt tone (Beep).
Charge the charging box
- Please use Type-c charging wire to charge. When charging, the green light flashes.
When the charging box is full, the green light is long on.
Product parameters
- Model: P1
- Bluetooth version: VS.4
- Transmission range: 1 OM (straight and barrier free)
- Headset charging time: about 1 hours
- Charging time of charging box: about 1 hour
- Music playing time:4-S hours
- Headset battery capacity: 3.7V /25MA
- Battery capacity of charging box: 3.7V /180 MA
Please properly arrange the use time and adjust the volume. Using headphones for a long time may damage your hearing.”
TIPS
- Before using the earphones, please read the manual carefully and keep it for future reference.
- The earphones need to be fully charged prior to first-time
- lf the earphones is left unused for over two weeks, please recharge it periodically.
- Please use the chargers made by qualified manufacturer.
- lf the mobile phone cannot find the Bluetooth headset, please check whether the headset is on Pairing status. If not connected for a long time, the headset will exit pairing mode.
WARNING
- Never disassemble or modify your earphones for any reasons to avoid any damages and danger.
- Do not store the earphones in extreme temperatures (under 0 to 45)
- Avoid using the indicator close to the eyes of children or animals.
- Do not use this earphones during a thunderstorm to avoid irregular function and increased risk of electrics hock
- Do not use harsh chemicals or strong detergents to clean the earphones 6. Keep the earphones dry.~
- Keep the headset and charging box dry.
FCC Caution
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>