Phomemo M08F Tattoo Stencil Printer User Guide
- July 20, 2024
- Phomemo
Table of Contents
Phomemo M08F Tattoo Stencil Printer User Guide
Printer components
- Reset Button
- Power Port
- Power Button
- Power Indicator
- Open Cover Button
Indicator light guide
| St atus | Description |
|---|---|
| Lit (Red) | Out of paper / Cover is open / Overheat |
| Blinking (Red) | Low power |
| Li（t Green） | Normal |
| Slow blinking (Green) | Charging while powered on |
| Red & Green (Alternating Flashing) | Charging while powered off |
Mobile app connection
Connecting to a computer for printing
Official website : Tattoo.phomemo.com
Download the corresponding drive for your computer system.
Follow the above instructions to install the driver.
Select the image and click on print.
Install and change the printer’s consumable
-
Bottom Paper
-
Transfer Paper
-
Protect Paper （Movable paper）
-
Tracing paper
-
When you need to retrieve the printing paper, you can press the PUSH button with both hands to take it out.
-
Any issues with your printer arising from using non-official printing papers will not be covered under our warranty policy.
FCC warning statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
SED warning statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
RF exposure statement
IC RF exposure statement:
The device has been evaluated to meet general IC RF exposure requirement. The device can be used in portable exposure condition without restriction.
European Union Compliance
| Type of wireless | Radio Frequency | Maximum Output Power (ElRP) |
|---|---|---|
| Bluetooth | 2400~2483.5 MHz | 6 dBm |
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Zhuhai Quin Technology Co, Ltd. declares that this product is in
compliance with Radio Equipment Directive 2014/53/EU.
The full texts of the EU declaration of conformity is available at the
following internet address: Tattoo.phomemo.com
Scan the QR code for more information.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>