Inrico S380 Rugged PTToC Radio User Guide

Inrico S380 Rugged PTToC Radio

FAQ

Frequently Asked Questions

• Q: What should I do if the battery overheats during charging?
  • A: Stop charging immediately, disconnect the charger, and remove the battery from any flammable areas.
• Q: Can I use a different power adaptor to charge the device?
  • A: It is recommended to use the authorized power adaptor to ensure warranty compliance and optimal performance.
• Q: How should I store the device when not in use for an extended period?
  • A: Remove the battery, charge it to 40%-65%, and store it in a cool, dry place away from heat sources.

Please read this instruction book carefully before using and keep this with care.

Notes Before Using

Please read the following content carefully. It is very important for radio users to gain general knowledge and risks.

• Do not use the device or charging the battery in any hazardous areas such as gas, dust, steam, etc.
• Please turn off the device while refueling or parking at the gas station.
• Do not disassemble your radio.
• Avoid prolonged time in the sun or placing it near heating appliance.
• Avoid excessive exposure to the extreme dusty, damp and splashing place, or leave it on unstable surface.
• Reparation by professional technicians, do not disassemble by yourself.

Disclaimer

Inrico reserves the right to modify product design and specifications. Inrico assumes no responsibility in the event of printing errors. All specifications are subject to change without notice.

Unpacking And Device Checking

• Please unpack and take out the device and all accessories carefully, and ensure all lists have been gotten before discarding the cardboard box.
• If any items are lost or damaged in transit, please contact with our distributors.

Accessories

Handling Precautions

• Do not overcharge the battery
  • Please stop charging if it can’t be fully charged within required time. The battery probably overheats, smokes, bursts or suddenly be on fire due to abnormal charging process. When fully charged or not charged, please disconnect the charger and unplug it from the power outlet.
• Do not discard battery in a microwave or high pressure container.
  • The battery probably overheats, smokes, bursts or suddenly be on fire.
• Do not expose damaged battery near any fire.
  • If the battery is broken, leaking or has an abnormal odor, please remove it from flammable areas immediately. The fluid in the battery is flammable, which may cause smoke and fire.
• Do not use abnormal battery
  • If the battery is with odd smelly, discolored, deformed, etc., please stop charging or disassemble from the device immediately.
• Please use authorized power adaptor
  • To comply with warranty terms and avoid damages, charge the battery using a specified charger for best performance.

Battery Care

Fully Charge Battery Before Initial Use

• Do preserve battery life by switching off a device and removing the batteries when it’s not being used, and is not expected to be used for extended periods of time.
• Do practice proper battery storage by keeping batteries in a cool, dry place at normal room temperature.

Properly Store Batteries

• Remove the battery from the device.
• Charge and discharge the battery to 40%-65% if it will not be used for 10 days or more. This can greatly extend the battery life.
• The battery should drop below 65% when it is idle for more than 10 days to prevent it from swelling.
• Store the battery in cool and dry environment that’s less than 25℃.

Features of Lithium Battery

• Battery capacity will reduce after multiple charging cycles.
• The battery capacity drops gradually even without being used.
• Longer charging time is required in shady place.
• Charging and storing Lithium battery in warm condition will short its lifespan. Please do not leave them inside the vehicle or near the heater.
• If the battery working time has reduced significantly, please replace the battery immediately in avoidance of fluid leakage.

Clean And Maintenance

• Before cleaning and maintaining the device: please stop running, turn off the device, and disconnect all connections with other equipment.
• When you do not use the radio, please cover the accessories connector.
• When cleaning the dust, please use soft brush and neutral detergent (no strong corrosive chemicals) to wipe it.
• Please keep the equipment and accessories dry.
• Please do not use the microwave oven or hair dryer or other heating devices to dry them.

Product Overview

| Action| Function| Remark
---|---|---|---
PTT1| Long press| Push to PoC talk| The default is PoC；PoC receiving the light is solid green，and transmitting is soldred
F2| Short press| PoC mode switch| The default is PoC
Long press| Dual transmitting mode switch| Dual transmitting mode is off by default
F3| Short press| Enter recording playback mode, short press F2 to next record; select the recording to play automatically| The most commonly used functions are short press to record the beginning and the end
Long press| Report current working mode| support customization
Menu| Short press| Main interface: Quickly enter the PoC APP Other interface: Pop-up operation menu|
Long press| Terminal upload| The system sends a broadcast notification to the APP, and the broadcast key value is determined; customization is supported
OK| Short press| Other interfaces: confirm button|
Long press| Quickly launch the camera| The system sends a broadcast notification to the APP, and the broadcast key value is determined; customization is supported

Return

| Short press| Main interface:

Other interface: Return/Delete

|
Long press| Home button, return to the main interface|

Dial Button

| Short press|

Non-POC APP: Enter operator call； POC APP: Make full-duplex call；

|
---|---|---|---
Long press| One-click video upload| Customizable

On/Off Button

| Short press| Hang up the phone/Turn off screen, lock keyboard|
Long press| Turn on and off，Support choosing to close PoC|
SOS| Long press| Initiate PoC , send PoC call|
Up| Short press| Move focus up|
Down| Short press| Move focus down|
Left| Short press| Move focus left|
Right| Short press| Move focus right|

Knob1

| L-rotation| Switch to the previous PoC group|

The knob is a stepless knob

R-rotation| Switch to the next PoC group
Knob2| L-rotation| Volume down|

Volume interface display

R-rotation| Volume up
*Button| Long press| Touch screen disable switch|  

After the touch screen is disabled, the interface prompts

Navigation Button

|

Short press

| Non-PoC APP: Enter the operator’s phone                          dialing interface POC APP: Enter the POC dialing interface|

Long press

| Non-PoC APP: Quickly dial the set operator phone number

Accessories Installation

Insert SIM Card

Attaching the Battery

• Align the electrical contact of the battery with the rails.
• Press the battery firmly, make sure the electrical connection touch with the bottom.

Attaching Headset

• Open the cover from the top of device to show the headset sockets. Headset will work immediately after being plugged in.

Install Hand Strip

Basic Functions

Power on/off

• Power On: Long press the power button for 3 seconds and the program will start.
• Power Off: Long press the power button for 3 seconds.

User Log-in

• After the user log in successfully, user information will be broadcast.

Initiate a Call

• Press PTT button and start to talk.
• The LED light is solid red during transmitting.
• The LED light is solid green during receiving.
• If the current network is not online, the green light flashes quickly.
• If occupied when other person is talking, the PTT button is invalid.
• Once the call time exceeds 60 seconds automatically end the call.

Program

• Use the programming tool, you need to enter the system settings, “Program” to start.

Status Indicators

__

Working Status

| Led Indicator
---|---
Color| Lasting Time
PoC Transmitting| Red| Solid Red
PoC Receiving| Green| Solid Green
Gateway Status| Green| Flash 1S/time
The network is normal| Green| Flash 5S/time
Login failed /

no network status

| Red| Flash 1S/time
The battery is low| Red| Flash 3S/time
Low Battery and No Network| Low battery priority is higher

Simple Troubleshooting

the battery.

●  The battery may be out of power. Charge or replace the battery.

●  The battery may be in poor contact due to dirt or damage. Clean the electrical contact or replace it.

Terminal Crash| ●  Too many APPS on processing.Force some programs to quit or restart the terminal.
Buttons Not Working| ●  The buttons may not work temporarily, restart the terminal.

●  The buttons are broken, contact the dealer or our company.

White Screen Error| ●  Display screen may not work temporarily, restart the device.

●  The display screen is damaged, contact the dealer or our company.

__

Echo or Noise During Connecting

| __

●  The signal may be weak, make sure the terminal is within network coverage.

● The speaker may be covered, clean the speaker surface.

__

__

Unable to Detect SIM Card

| __

●  The SIM card may be incorrectly installed. Remove and re-insert the SIM card.

●  The SIM card may be not working due to dirt or damage. Clean the electrical contact or replace it.

Unable to Locate| ●  The signal is weak and the radio can’t receive the signal. Move to open and flat area and try again.
__

__

Unable to Charge

| __

●  The power adapter plug may be damaged or with poor contact.Pull out and re- plug the adapter.

●  The charging cable connectors may be damaged or with poor contact. Pull out and re-insert the cable.

__

__

__

Shorter Standby Time

| __

●  The battery life becomes shorter in high temperature environment. Replace a new qualified battery.

●  Power consumption increased in areas with weak signal. Please temporarily turn off the device.

__

__

Unable to Connect the Network

| __

●  SIM card cannot work properly or cannot be used. Make sure the SIM card have balance and not overdue.

●  Mobile network is not enabled, swift on the SIM card network and contact the network operator to activate the cellular network.

Specification

__

Frequency

| BT: 2402-2480MHz BLE: 2402-2480MHz

2.4G Wi-Fi: 2412-2472MHz

5G Wi-Fi: 5150-5250MHz; 5250-5350MHz;

5470-5725MHz; 5725-5850MHz NFC: 13.56 MHz

GSM 850/ PCS 1900

WCDMA Band 2/5

LTE Band 2/4/5/7/12/17/26/38/40/41/66 (For FCC)

LTE Band 2/4/5/7/12/17/ 38/40/41/66 (For IC)

Support| GPS L1 C/A, BDS B1I, Galileo E1: 1559-1610

MHz

CPU| QM215
Memory| 2GB+ 16GB(ROM)
Voltage| 3.8V
Screen Size| 2.4
Camera| Front: 5MP / Rear: 13MP, 107° Wide Angle
Battery| 3.8V Removable Battery, 6200mAh
Dimension (HWD)| 162.36134.5mm (Without Antenna & Belt clip)
Weight| ≈388g
Working Temperature| -0°C ~ 55°C
Storage Temperature| -40°C ~ 85°C

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

In all EU member states,operation of 5150-5350 MHz is restricted to indoor use only.

5GHz band(W52, W53): Indoor use only/Bande 5 GHz (W52, W53): utilisation intérieure uniquement

ISED Warning

• This product meets the applicable Innovation, Science, and Economic Development Canad technical specifications.

This device complies with Innovation, Science, and Economic Development Canad licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference.
2. this device must accept any interference, including interference that may cause undesired operation of the device.

FCC RF Exposure Requirements:

For body-worn operation, this radio has been tested and meets the FCC RF exposure guidelines when used with accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Use only the supplied antenna. Unauthorized antennas, modifications or attachments could damage the transmitter and may violate FCC regulations.

Hold the transmitter approximately 25 mm from your face and speak in a normal voice, with the antenna pointed up and away.

ISED Radiation Exposure Statement

For body worn operation, this model device has been tested and meets the ISED RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that Contains no metal and that positions of the face up minimum distance is 25 mm.

Inrico Technologies Co.,Ltd.

• A1703, Shenzhen National Engineering Laboratory Building, No. 20 Gaoxin South 7th Road,Shenzhen,China
• www.inricosolutions.com

References

• Inrico Two Way Radio Communication|Inrico

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>