Inrico S100 High Quality Wireless 4G Poc Radio Instructions

June 5, 2024
Inrico

Inrico S100 High Quality Wireless 4G Poc Radio

Inrico-S100-High-Quality-
Wireless-4G-Poc-Radio-PRODUCT

Notes before using:

  • Do not use the walkie talkie in an explosive environment (such as gas, dust, steam, etc.) or to charge the battery.
  • Please turn off the walkie-talkie while refueling or parking at the gas station.
  • Do not adapt or modify the machine whether there is any reason.
  • Do not let the walkie talkie by prolonged direct sunlight, do not place it near a heating appliance too
  • Do not put the walkie talkie at the extremely dusty, damp and splashing place and do not place it on an unstable surface.
  •  The repair of the walkie-talkie only can be carried out by professional technicians, do not disassemble by yourself.

Note
Please read above content carefully. It is very important for walkie talkie users to gain general knowledge and understanding of risk about the use of walkie talkie

Accessory Installation

  1. lnsert SIM card and TF card

  2. To install the battery

  3.  Insert the battery to connect with the metal at the bottom of the tank;

  4.  Press down on the other end of the battery

  5. Close the battery cover

  6.  Push the battery cover until it clicks Into place,

  7.  Push the battery cover down;

  8.  Press battery latch.
    Open the battery cover: pull battery latch, and then open the battery cover.

  9. Install the belt clip ****

  10.  The belt clip should be aligned with the back screw hole

  11.  Install the belt clip by rotating screw
    Uninstall the belt clip
    Uninstall the belt clip by rotating screw until loos

  12. Installing headset
    Open the cover from the top of device to show the headset sockets. Headset will work immediately after being plugged in.

Radio Overview

Inrico-S100-High-Quality-Wireless-4G-Poc-Radio-
fig7

1 n 12 Navigatio n L eft”
2 Customized Key Navigation “Up”
3 Volume+ key 14 Navigation “Right”
4 Volume- key 15 Return button
5 Channel+ key 16
6 sos 17 Dial key
7 Channel – key 18 Navigation “Down”
8 M6 Port 19 Power on/of
9 ****

U S B Port

| ****

21

| Speaker
11| Menu Key| |

Functions Sheet

Inrico-S100-High-Quality-Wireless-4G-Poc-Radio-fig9

Basic function

  • Power on
    Press and hold the power button for 3 seconds to沁wer on.

  • Power off
    Press and hold the power button for 3 seconds to power off
    If the device 1s ,n the charging state at this time, the device lights up 1n red a心displays the current battery level

  • User login
    Display the current user login information , after the user login successfully,

    • Calling used
    • Press the PTT button to talk.
    • After the app logs 1n normally, the breathing light starts to flash 1n green If the device is in call statue, the led light lights up red;
    • If the device is in listening status, the led light is green,
    • If the current speaking is occupied, means someone is talking, the PTT button is invalid
    • The maximum call per person is limited to 60 seconds, if it exceeds 60 seconds, the speaking will be automa廿cally released (can be set to 1- 60s by APP)
  • Voice playback and battery broadcas t

    • Short press (5) button to switch group
    • Long press (5) button, playback last ten voices; press the PTT button, automatically return to the last voice playback
    • Short press (7) button to switch group
    • Long press the (7) button, broadcast current battery
  • Flashlight
    Press and hold (16) button for 3 seconds (OK button) , turn on/off flashlight

System Parameter

Operating system Android
Wo『king temperature -20’t – .so’C
Storage temperature -40’C一十85’C
Voltage 3.BV
Support 2G/3G/4G/GPS
Size *64 5叮29 226mm**
Weight -220g




Network support

| ****


EU

| FOO B 1/3/7/8/20/28
TOD 838/40
WCDMA 81/8
GSM 83/8



us

| FDD B2/4/5/7/12/17
TDD B38/40
WCDMA B2/4/5
GSM B2/5
Sound output power| 2W@10%distortion

LED indicators


Description

| LED indicators
---|---
Color| Status
Log-in error| Red| Blink/1s
PTT successful| Red| On
Answer call| Green| On
Power on| Green| On
Searching network| Green| Blink/1s
Power off| Red| On
Extreme low battery ( < 15%)| Red| Blink/2s
Standby| Green| Blink/5s
Charging| Red| On
Fully charged| Green| Off

Security information

Before using the device operation, please read and observe the following precautions to ensure optimum device performance, and avoid dangerous or illegal situations.

  • Electronic equipment
    The place of civilization provisions that has prohibited the use of wireless devices, don’t use the device, otherwise it will lead to interference from other electronic devices or other hazards.

  • Area with easy firing and explosion
    Refueling point (service station)or near inflammable and explosive materials, flammable and explosive chemical agents in any area, and don’t use the device, the device may cause an explosion or fire.

  • Operating environment
    Don’t use the device in dusty, wet, dirty, or near magnetic fields, so as to avoid internal circuit equipment failure.
    Don’t use this device in a thunderstorm, thunderstorms could result in equipment malfunction or shock hazard.
    Don’t place in direct sunlight for too long time.
    Please avoid equipment and accessories to rain or moisture, otherwise it may be caused a fire or electric shock.
    Don’t place the device near a heat source or exposed flame sources, such as electric heaters, microwave, oven, water heater, fire, candles or other places may high temperatures.

  • Accessories requirement
    Don’t use unapproved or incompatible power supply, battery charger, otherwise, it may result in a fire, explosion or other hazard.
    Only use manufacturer-approved equipment and equipment accessories for this model, if you use other types of accessories, it will be lead to accidental damage to the equipment, breach of warranty of the equipment.

  • The charger security
    When fully charged or not charged, please disconnect the charger from the device and unplug the charger from the power outlet.
    Don’t drop or bump the charger, if the charger is damaged, don’t continue to use, to avoid accidents.
    Don’t touch the device and charger with wet hands to avoid short-circuiting device, malfunction or electric shock.

  • Battery Safe

    • Don’t use the metal objects with two poles of the battery to docking, or contact with the endpoint of the battery, to avoid the battery short circuit, as well as damage caused by battery overheating,
    • Don’t expose the battery to high temperature or fever around the device, and battery overheating may cause an explosion Don’t disassemble or modify the battery, insert foreign obJects or liquid ont「us1on, 1n order to avood battery leakage, overheating, causing a fire or explosion
    • If a battery leaks, don’t contact with skin or eyes. If contact, immediately rinse with water and go lo hospital for medical treatment
    • If the battery 1s 1n the process of using, charging or saving, which have d1scolorat1on, deformation, abnormal heating phenomenon, please stop using and replace with new battery Don’t throw batteries In a fire, otherwise It wlll cause fire and explosion
    • Don’t let children touch the battery, to avoid accidents
    • Don’t use a damaged battery.
    • When the standby time of the device is s1gn1f1cantly shorter than normal, please replace the battery
    • Dispose of batteries according to local regulations, not dispose as household waste

Care and Cleaning

  • Do not lift up antenna or an external microphone directly
  • Please use lint-free cloth to remove dust and stains from a radio to avoid poor contact
  • Please place the cover on headphone jacks when not in use
  • The keypad and sensors should be cleaned carefully with a lint­free cloth moistened with clean water and a mild washing l1qu1d. Do not use strong corrosive solvents for cleaning

warning

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value.
Before a new model device is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, Tests for each device are performed in positions and locations (worn on the body)as required by the FCC.
For face-up,10mm was used for test, this equipment should be installed and operated with minimum distance 10mm.
For body worn operation, this model phone has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that Contains no metal and that positions the handset a minimum of 0 cm from the body
Non-compliance with the above restrictions may result in violation of RF exposure guidelines.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals