OXY-TECH 1033 Oxy Breather 4 Feet Single Sided Nasal Cannula Instruction Manual
- July 26, 2024
- OXY-TECH
Table of Contents
Oxy-Breather
Instructions and Use
1033 Oxy Breather 4 Feet Single Sided Nasal Cannula
STEP 1:
Hold the EARPIECE and SUPPORT ARM in your RIGHT hand and drape the tubing over
your LEFT shoulder.
STEP 2:
Attach the TUBING CLIP to your clothing.
You can attach it to the Front or bacR depending on your preference.
STEP 3:
Place the EARPIECE over your LEFT ear. Custom At to your ear by squeezing or
widening the earpiece.
5TEP4:
Insert NASAL PRONGS into nose. You may bend the nosepiece to insert the prongs
into your nose. When released, they will gently hug the inside of your nose.
DirectHome
CLICK TO FEARN MORE
Fine-Tuning Your Fit
If your Oxy-Greather sags, feels too tight, or appears uneven across your face, it may be necessary to adjust the length of the tubing leading from the support arm to your nose.
STEP 1:
Gently pull up on the tubing to pull it out from the groove holding it in the
support arm
STEP 2:
Move the cannula up or down the support arm to shorten or lengthen the hose
STEP 3:
Re-insert the cannula tubing into the open groove on the support arm at
desired length
NOTE: It may be necessary to repeat these steps several times before you find your ideal fit.
OXY-TECH
1033 E. Wagon Wheel Drive
Phoenix, AZ 85020 USA
CAUTION: Use of sterilization or cleaning solutions may render this
device nonfunctional
www.oxy-tech.com/instructions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>