Zuuko G45 Smart Outdoor String Lights User Manual

User Manual
String Lights

Specification

Dimmnable,16 Million Color.Music Syrc, App Contro -Local contro.
Please note that all colorful string lights cannot be DIY cut!
Long press for 3 seconds to switch between music mode and scene mode

1. Short press in music mode to switch 4 kinds of music dynamic effects in sequence.
2. Short press in scene mode to switch 20 scene dynamic effects in sequence.
   On/Off: Short press to turn on/off the LED strirg light.

1. LED brightness adjustment button (+) to in crease sensitivity in music mode and mode speed in scenemo
2. The LED brightness adjustment button (- ) reduces the sensitivity in music mode and lowers the bottom mode speed in scene mode
3. Pause/Run button Special note: If you want to change the staticstateof the lamp bead,light bulb, lamp be
4. On/off button.
5. Lamp be a control key; bulb control key;lamp bead + bulb combination control
6. LED white light button, switch between cool white and warm white
7. LED color buttons. Switch among monoc hromered, green,blue,white,orange,
8. Brightness button :Set from 25 %, 50 % to 100%
9. 4 kinds of music modes.
10. 5 Fixed color scene modes.
11. Start the cycle of 20 fixed color scene modes, and switch one every 30 seconds.
12. Instatic mono chrome mode, 16 colors change for wardor back wardinorder : Indynamic mode,
13. Countdown: 1 hour, 2 hours, 4 hours, 8 hours,when both the bulb and lamp bead are closed,all of

Pleasc pull out the plastic tab from the bottom of the IR remote to ensure that the battery powered prooerly, Mase sure the IR remote aims at the IR receiver within the sensing dislance, The angle of the IR receiver is 20 and the sensing distance is 5 mecers. Please remocely control within che sensing range.

Installation Diagram

Setting Hello Fairy Smart App
From iOS APP Store or google olay download “Hello Fairy scan the QR cade anc install the  Hello Fairy” for either iOS or Aadraic.

http://www.qrtransfer.com/fairylight.html

Connect mobile phone

1. Adapter version—Connect the power  cord, plug in the power source, and then turn on thé light string switch.
   2. Turn on the mobile phone Bluctooth.
   3. Open the Hello Fary APP? on the mabile phone and search ‘for the device Hello Fa’ry xxx”.
   4 After two device name is displayed on the interaco you can cick “Hello Fairy -xxx to center the main interface and slart the operation,

FCC Statement

This device conplics with par 1b of the -CC Rules. Operation ‘s subjec: to che following two conditions:
[1] This device may not cause harmul interference, and [2] This device must acceot any interferacce received, ncluding interferace that ray cause Lndestred operation.
RF Exposure Information
The device has been evaluated to meet sereral RF excosure requiremect. The device can or used in portaole exposure concition without rescriction.
Warning

1. Please pay attention to orevent Slatica electricily during the installation and use of the product ba net use sharp objects to touch the oroduct, and avoid contact to the srong chemicals suce as strong acio and akali.
2. During installation the bert part should be avoided just in the pasilion of the IFD components, so as not to oamage the product and affectts service life.

Warranty description

Tels product has one year warranty from the cay after sgning. Please contact Us if you have any questions orissues.

http://www.qrtransfer.com/fairylight.html

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>