Onity 10108350P1 Serene Wall Reader User Manual

Onity 10108350P1 Serene Wall Reader

Product Information

Specifications

• Operating Temperature: Not specified
• Humidity: Not specified
• Operating Voltage: Not specified
• Operating Current: Not specified
• Dimensions: 4 inches (102 mm) height, 1.6 inches (40 mm) width, 1.1 inches depth (28 mm)

Product Overview
The Onity Serene Wall Reader is a multipurpose access device designed for indoor or outdoor installations. It triggers third-party devices controlling perimeter doors, elevators, parking areas, and gated entryways. The device provides wireless access using Bluetooth low energy and RFID cards.

Features

• Multipurpose access device
• Wireless access using Bluetooth low energy and RFID cards
• Indoor or outdoor installations

Product Usage Instructions

Using a Wall Reader

1. Hold an RFID card in front of the wall reader read head.
2. While holding the card in this position, touch the center of the card onto the read head for 1 second, then remove the card.
3. Verify the action is complete when the wall reader beeps and LEDs flash.

General Wall Reader Maintenance

1. Visually inspect the reader’s face for damage and replace it as required.
2. Using a clean cloth, wipe down the exterior and reader’s face.
   Caution: Do not use harsh chemicals when cleaning the wall reader.

Technical Support
For technical support, visit www.onity.com, call 1-800-248-6189, or contact your sales representative.

FAQ

Q: How can I get technical support for the Onity Serene Wall Reader?
A: For technical support, you can visit www.onity.com, call 1-800-248-6189, or contact your sales representative.

Product Overview

Onity Serene Wall readers are multipurpose access devices that trigger third- party devices that control perimeter doors, elevators, parking areas, gated entryways, etc. They are specifically designed for indoor or outdoor installations. Onity Wall Readers provide wireless access using Bluetooth low energy and through RFID cards.

Features

• Compatible with Onity locking systems and Onity Property Management System software (OnPortalTM front desk system)
• The online configuration supports audit trail for the last 3,000 openings
• Serene wall readers support surface-mount or flush-mount installation
• Serene wall readers are ADA-compliant, utilizing an ADA-opening timer
• Serene wall reader utilizes card encryption as well as Bluetooth technology
• Specialized control electronics available to accommodate elevator use

General Product Specifications

Basic Specs

Operating Temp| -30º C (-22º F) through 75º C (167º F)
Humidity| 50º C (122º F) at 95% humidity
Operating Voltage| ~12-24VDC
Operating Current| ~1A maximum current draw
Dimensions| 4 inches (102 mm) height, 1.6 inches (40 mm) width, 1.1 inches depth (28 mm)

Serene Wall Reader Dimensions

Wall Reader Assembly Diagram

Using a Wall Reader

RFID Wall Reader

Step| Action
1.       Hold an RFID card in front of the wall reader read head.
2.       While holding the card in this position, touch the center of the card (1 second) onto the read head then remove the card.
3.       Verify action is complete when the wall reader beeps and LEDs flash.

General Wall Reader Maintenance

Caution: Do not use harsh chemicals when cleaning the wall reader.
1.       Visually inspect the reader’s face for damage and replace it as required.
2.       Using a clean cloth, wipe down the exterior and reader’s face.

Technical Support
For technical support, visit www.onity.com, call 1-800-248-6189 or contact your sales representative.

Environmental Compliance

• Onity Serene wall readers adhere to environmental regulations established by the current European Union (EU) RoHS, WEEE, and REACH directives.
• Onity Inc. declares that our products and packaging do not contain any of the SVHCs, identified by EHCA, in any concentration above 0.1%, and hereby certify that its products are in full compliance with all aspects of Commission Regulation (EU) 2017/999 of 13 June 2017 amending Annex XIV to Regulation (EC) No 1907/2006 of the European Parliament and of the Council concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH).

Certifications and Label

Certifications

|

Label Example

---|---
•        FCC & IC

•        Radio Equipment Directive (2014/53/EU)

|

Regulatory Information

Model Numbers
For regulatory identification purposes, the product is assigned a Regulatory Model Number (RMN). The RMN for Serene is listed below. Do not confuse this regulatory number with the marketing name or product part numbers.

Regulatory Model Number (RMN)| Lock Family Name| Description| Commercial Model Number (CMN)
---|---|---|---
10108350P1| Serene| Serene Wall Reader with BTLE and RFID| 10108351P1 – Model equipped with Bluetooth & RFID

Regulatory Statements

Canada (ISED)| This device complies with Innovation, Science and Economic Development (ISED) Canada’s license-exempt RSS(s).

Operation is subject to the following two conditions: ****

Radiation Exposure Statement

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 20 cm between the radiator & your body.

---|---
United States (FCC)| This equipment has been tested and found to comply with the limits for a Class A digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under this user manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his/her own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.     This device may not cause interference; and

2.     This device must accept any interference, including interference that may cause undesired operation.

Changes or modifications not expressly approved by Onity Inc. could void the user’s authority to operate the equipment.

To comply with FCC RF exposure compliance requirements, the device must be installed to provide a separation distance of at least 20 cm from all persons.

Radiation Exposure Statement

This product complies with the U.S. RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user’s body or if the device is set to lower output power if such a function is available. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

European Union (CE)| This Class B digital apparatus conforms to the requirements of the following EU directives:

1.            RED, 2.4GHz, Bluetooth Power class 1 (12dBm max)

2.            WEEE Directive (2012/19/EC)

© 2024 Carrier All rights reserved. Onity is a part of Carrier. Other brand and product names are or may be the trademarks of, and are used to identify products or services of, their respective owners. The information in this document is subject to change without notice. Carrier assumes no responsibility for inaccuracies or omissions and specifically disclaims any liabilities, losses, or risks, personal or otherwise, incurred as a consequence, directly or indirectly, of the use or application of any of the contents of this document.

References

• Onity - Enterprise Mobile Access & Electronic Locking Solutions | Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>