TRAXXAS TRA10295 Front and Rear Sway Bar Installation Guide
- July 15, 2024
- Traxxas
Table of Contents
TRA10295 Front and Rear Sway Bar
“`html
Product Information
Specifications:
- Product Name: Front and Rear Sway Bar
- Compatible Models: MAXX SLASH, MAXX
- Part Number: 10295
- Manufacturer: Traxxas
Product Usage Instructions
Front Sway Bar Installation:
-
Remove the front hinge pin retainer as shown in Fig 1.
-
Install the sway bar using the provided components and follow
the instructions in Fig 3. -
Tighten the 3x6mm FCS until they secure the bar, then back off
slightly to allow free pivoting.
Rear Sway Bar Installation:
-
Remove the rear hinge pin retainer as shown in Fig 2.
-
Install the rear sway bar using the components provided and
follow the instructions in Fig 4. -
Ensure the 3x3mm GS is tightened completely to secure the sway
bar to the vehicle.
FAQ
Q: How do I contact Traxxas for technical assistance?
A: You can call Traxxas at
(1-888-872-9927) for technical
assistance. This number is for U.S. residents only.
Traxxas Contact Information:
6250 Traxxas Way, McKinney, TX 75070
Phone: 972-549-3000
Fax: 972-549-3011
Email: support@Traxxas.com
Revision: KC24004-R00 Rev 240228
“`
Front and Rear Sway Bar Installation Instructions
Kit contents: · Sway bars
– Red color band, 3.0mm (stiff) – Green color band, 2.8mm (stiff) – Yellow
color band, 2.5mm (intermediate) – Black color band, 2.3mm (intermediate) –
Blue color band, 2.0mm (soft) · Front or rear linkages (4) · Front sway bar
mount
· Rear sway bar mount · 3x6mm FCS (4) · 3x15mm BCS (4) · 3x3mm GS (4)
Tools required: · 1.5mm hex wrench · 2.0mm hex wrench · 2.5mm hex wrench
Reduce Understeer Reduce Oversteer Smoother / High Grip Rougher / Lower Grip Severe Terrain
Front Sway Bar Soften Stiffen Stiffen Soften Remove
Fig 1 Front Hinge Pin Retainer Removal
MAXX SLASH
Wheel shown removed for clarity
4x25mm BCS
4x12mm BCS
Front Bumper
Fig 2 Rear Hinge Pin Retainer Removal
MAXX SLASH
Wheel shown removed for clarity
4x25mm BCS
4x16mm BCS
Rear Bumper
Covers Part #10295 Rear Sway Bar Stiffen Soften Stiffen Soften Remove
MAXX
Front Bumper
4x25mm BCS
4x12mm BCS
4x12mm BCS
Hinge Pin
Retainer
4x10mm CCS
MAXX
Hinge Pin 4x12mm Retainer
BCS
4x10mm CCS
4x25mm BCS
4x16mm BCS
Rear Bumper
Wheel shown removed for clarity
4x12mm BCS
Hinge Pin Retainer
4x10mm CCS
Fig 3 Front Sway Bar Install
MAXX Slash shown, MAXX installation
is identical.
See 3A
3x3mm GS**
3x15mm BCS
4x12mm BCS
3x6mm FCS
3x6mm FCS
Sway Bar
Sway Bar Mount
*Note: Tighten the 3x6mm FCS until they secure the bar, and then back off slightly. The sway bar must pivot freely in the mount.
Fig 4 Rear Sway Bar Install
MAXX Slash shown, MAXX installation
is identical.
See 4A
3x3mm GS**
Wheel shown removed for clarity
4x12mm BCS
Hinge Pin Retainer
4x10mm CCS
Fig 3A
Wheel shown removed for clarity
See 3A
3x3mm GS**
3x15mm BCS
**Important: The 3x3mm GS must be tightened completely to secure the sway bar to the vehicle.
Fig 4A
3x3mm GS** 3x15mm BCS
Front of Truck
3x15mm BCS
Sway Bar Mount
Sway Bar
4x12mm BCS
See 4A
3x3mm GS**
3x6mm FCS*
3x6mm FCS*
*Note: Tighten the 3x6mm FCS until they secure the bar, and then back off slightly. The sway bar must pivot freely in the mount.
3x15mm BCS
**Important: The 3x3mm GS must be tightened completely to secure the sway bar
to the vehicle.
Wheel shown removed for clarity
Front of Truck
3x3mm GS**
3x15mm BCS
If you have questions or need technical assistance, call Traxxas at
(1-888-872-9927) (U.S. residents only)
Traxxas, 6250 Traxxas Way, McKinney, TX 75070, Phone:
972-549-3000, Fax:
972-549-3011, e-mail:
support@Traxxas.com
KC24004-R00 Rev 240228
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>