AVerMedia AW111 Wireless Expansion Microphone User Guide

: July 15, 2024
: AVerMedia

Table of Contents

AVerMedia AW111 Wireless Expansion Microphone
Important Safety Instructions
Introduction
Overview (AW111T)
Installation
LED Indications
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AVerMedia AW111 Wireless Expansion Microphone

AVerMedia-AW111-Wireless-Expansion-Microphone

Important Safety Instructions

Read these instructions.
Keep these instructions.
Follow all instructions.
Heed all warnings.
Do not use the apparatus on uneven or unstable surfaces.
Do not use this apparatus in a wet environment or near water.
Unplug the apparatus before cleaning. Clean only with a dry cloth.
Use in a well ventilated environment. Do not block any ventilation openings.
Use the apparatus within ambient temperatures 32–104°F (0–40°C).
Use power sources within the specified voltage range.
Do not place heavy objects on the apparatus.
Do not install near heat sources such as radiators or stoves.
Do not defeat the safety purposes of the polarized or grounding-type plug.
Protect the power cord from being walked on or pinched, particularly where the cord connects with plugs or adapters.
Only use the attachments and accessories specified by the manufacturer.
Unplug this apparatus during lightning.
Do not modify or disassemble the apparatus in any way.
Refer all servicing to AVerMedia Customer Service.
Do not dispose of the apparatus as general household waste. Dispose in accordance with local environmental laws.

Lithium Polymer Battery

Attempting to disassemble or modify the battery can cause an explosion or liquid leakage from the battery. If the rechargeable battery is incorrectly replaced, there is danger of an explosion.
The battery contains a small amount of harmful substances. To avoid possible injury, replace it with a battery type recommended by AVerMedia.
The battery’s working temperature is between 0°C and 35°C, be sure to operate the device within this range. Do not expose it to direct sunlight as it could cause overheating, rupture, or even fire.
Even if the battery is fully charged and not in use, it will still discharge gradually over time. If you haven’t used the device for a while, it is recommended to recharge it before use.
Batteries are consumable supplies. Their power capacities degrade gradually after repeated charging. Therefore, even when you charge it fully every time, the usage time will still reduce and batteries will eventually die out.
When the device is in use or charging, it is normal for it to get warm.
Never charge the battery unattended. During the entire process of charging your battery, you must constantly observe and monitor the charging process so that you can quickly react to any problems that may occur and to be certain that the battery is being charged properly.
The battery should be stored at room temperature, charged to approximately 30 to 50% of capacity at least once per year to prevent over-discharge.
Do not discharge the battery at a rate exceeding the maximum continuous discharge current specified for it. Otherwise, the battery will overheat and result in battery deterioration, bursting, ballooning, or possibly cause a fire or explosion.

Introduction

The AVerMedia AW111 is a wireless, extension microphone designed for the AVerMedia Mingle Bar (PA511D). While extending PA511D’s pickup range, AW111 also delivers better sound for online users attending the meeting in a larger space.

Inside the Box AVerMedia-AW111-Wireless-Expansion-Microphone-
fig-1

Overview (AW111T)

AVerMedia-AW111-Wireless-Expansion-Microphone-fig-2

LED Indicators
Brightness Button
- Tap 1X: Toggle between high and low brightness
Power Button
- Tap 1X: Power on
- Long-tap 2s: Power off
Pair Button*
- Long-tap 3s: Activate pairing
Mute Button
- Tap 1X: Mute/unmute mic.
AI Button with Indicator
Tap 1X: Enable AI noise reduction
Microphone
USB Type-C Port (for charging only)
AW111T and AW111R are pre-paired out of the box, so it’s not recommended to re-pair them unless needed.
USB-A Connector (for power only)
Pair Button with Indicator Long-press 3s to activate pairing
3.5 mm Mic Output*
Pair Button with Indicator Long-press 3s to activate pairing

This 3.5mm Mic Output only works when connected to a 3.5mm TRS Mic Input.

Installation

Connect the Wireless Receiver (AW111R) dongle to your Mingle Bar (PA511D). The AW111R will turn on automatically.
Note 1 : Make sure your PA511D’s firmware is up to date for proper functionality with AW111.
Connect the Wireless Microphone (AW111T) to a power outlet. The AW111T will turn on automatically.
Note 2: For first-time use, it’s recommended to fully charge the AW111T until all indicators turn solid blue.
The AW111R and AW111T are pre-paired out of the box, so they are ready to go once turned on.
Note 3: If not paired, you can still pair them manually by following the steps below.
On the AW111R, press and hold one of its Pair Buttons until its indicator rapidly flashes blue and red.
On the AW111T, tap and hold the Pair Button until the indicators rapidly flash purple and red.
Wait until both devices’ indicators turn solid blue.

LED Indications

AW111T Indicators Status

Scrolling blue Firmware update
Flashing blue and red rapidly (all indicators) Pairing activated
Solid blue (at battery level) Paired / ready
Flashing red (far-left indicator) Low battery
Solid red (all indicators) Microphone muted
Solid blue (all indicators) Full battery

AW111R Indicators Status

Flashing purple and red Starting up / waiting to pair
Flashing purple and red rapidly Pairing activated
Solid blue Paired

More Info
For more information, visit our webpage http://q.avermedia.com/AW111 or scan this QR code.

Specifications

Wireless Microphone (AW111T)

Connection Type| USB Type-C
Power Supply| 5 V / 1.5 A
Wireless Frequency| 5.8 GHz (worldwide),

5.2 GHz (Japan)

5.2 GHz (Japan)

Audio Sampling Rate| 48 KHz / 24 Bit
Connector| USB-A (for power only), 3.5 mm
Dimensions (W x D x H)| 8.3 x 1.2 x 1.4 cm (3.3 x 0.5 x 0.6 in)
Weight| 20 g (0.7 oz)

Note : Specifications are subject to change without prior notice. Please refer to our webpage for the latest details.

Disclaimer
All pictures contained in this documentation are example images only. The images may vary depending on the product and software version. Information presented in this documentation has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. The information contained in this documentation is subject to change without notice.

Copyright and Trademark Information
© 2024 by AVerMedia Technologies, Inc. All rights reserved. No part of this publication, in whole or in part, may be reproduced, transmitted, transcribed, altered or translated into any language in any form by any means without the written permission of AVerMedia Technologies, Inc. Information and specification contained in this manual are subject to change without notice and do not represent a commitment on the part of AVerMedia.

For more information, please visit www.avermedia.com.
AVerMedia is a trademark or registered trademark of AVerMedia Technologies, Inc.

Headquarters
Address No.135, Jian 1st Rd., Zhonghe Dist., New Taipei City 23585, Taiwan
Websitewww.avermedia.com
Supportwww.avermedia.com/support
Telephone +886-2-2226-3630.

US Office
Address 754 Charcot Avenue, San Jose, CA 95131, United States
Websitewww.avermedia.com/us

Europe Office
Address Hanauer Landstrasse 291 B, 60314 Frankfurt Hessen, Germany.