sorbus NTSHLV2 Floating Wall Shelves Instruction Manual
- July 13, 2024
- SORBUS
Table of Contents
sorbus NTSHLV2 Floating Wall Shelves
Thank You
Thank you for your purchase. Please reference assembly instructions before use. Make sure all parts are present and place them side by side for easy identification.
Package Contents
Tools Required: (Not Included): Drill, Hammer, Pencil
-
A Wall Mount
-
B Shelt
-
C Wall Anchor
-
D Wall Screw
-
E Shelf Screw
-
F Level
-
G Cap Sheet
-
H Screwdriver
Installations Instructions
-
Step 1: For each step the arrow needs to be facing up. Using the level (F) for accuracy, place wall mount (A) against wall where you want the floating shelves to hang. Mark each hole with a pencil.
-
Step 2 : Drill holes into all the marked areas with the twist drill bit. Then knock all wall anchors (C) into place with hammer.
-
Step 3: Insert wall screws (D) through wall mount (A) and into placed wall anchors (C) and secure with screwdriver (H).
-
Steps 4: Slide shelf (B) into wall mount (A) ends.”
-
Step 5: Insert shelf screws (E) and secure with screwdriver (H) from underneath the shelf. Add caps (G). Make sure shelf is secure before use. Repeat with all shelves. Add your favorite decorative item(s) and enjoy!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>