Grids CGRFCC Folded Corner Clipper Instructions
- July 13, 2024
- Grids
Table of Contents
Grids CGRFCC Folded Corner Clipper
Product Information
Specifications
- Product Name: American Pie Month 2 Alternate Cutting Instructions
- Rulers Included: Folded Corner Clipper, Tucker Trimmer, Wing Clipper
- Usage: Cutting fabric for quilting projects
Product Usage Instructions
Framing Units
- Follow the cutting instructions provided using a Folded Corner Clipper, Tucker Trimmer & Wing Clipper Rulers.
Block Center Units
- Cut each of the 3 squares once on the diagonal to make (4) quarter square triangles.
- Cut each of the 3 squares once on the diagonal to make (4) half-square triangles.
FAQ
Q: How do I use the Folded Corner Clipper?
A: To use the Folded Corner Clipper, align the ruler with your fabric and trim as instructed in the manual.
Q: What is the Tucker Trimmer used for?
A: The Tucker Trimmer is used to trim down units to precise measurements for accurate piecing.
Q: How do I cut triangles using the Wing Clipper?
A: Place the ruler on your fabric, align it correctly, and cut along the edges as directed to create precise triangles.
General Notes
- The 5¾” and 3¼” squares are for making Flying Geese the Deb Tucker method where applicable.
- The 2¾” x 4¾” rectangles and 2¾” squares are for making flying geese with different colored wings as well as the parallelograms in the framing units.
- The 2½” squares are used for corners and portions of the framing units.
- The 2½” x 4½” rectangles (background) are used in portions of the framing units.
- The 4½” red and navy check squares are for the block centers.
Framing Units
For the Framing Units:
From Background Fabric
- Cut (4) 2¾” x WOF strips; Subcut, (12) 2¾” x 4¾” rectangles, (24) 2¾” squares, and (8) 2½” squares
- Cut (1) 2½” x WOF strip; Subcut (8) 2½” x 4½” rectangles.
From Small Gray Dot Fabric
- Cut (2) 2¾” x WOF strips; Subcut (24) 2¾” squares.
- Cut (1) 4¾” x WOF strip; Subcut (12) 2¾” x 4¾” rectangles.
From Large Red Check Fabric
- Cut (1) 2¾” x WOF strips; Subcut (12) 2¾” squares.
- Cut (1) 4¾” x WOF strip; Subcut (12) 2¾” x 4¾” rectangles.
From Large Navy Check Fabric
- Cut (1) 2¾” x WOF strips; Subcut (12) 2¾” squares.
- Cut (1) 4¾” x WOF strip; Subcut (6) 2¾” x 4¾” rectangles.
For the Block Center Units:
From Background Fabric
- Cut (1) 3½” x WOF strip; Subcut (2) 3½” squares and (8) 2½” squares. Cut each 3½” square twice on a diagonal to make (8) quarter square triangles.
- Cut (1) 2¾ x WOF strip; Subcut (8) 2¾ x 4¾” rectangles.
From Small Navy Dot Fabric
- Cut (1) 3½” x WOF strip; Subcut (1) 3½” square and (2) 3” squares. Cut the 3½” square twice on the diagonal to make (4) quarter square triangles. Cut each of the 3” squares once on the diagonal to make (4) half-square triangles.
From Small Red Dot Fabric
- Cut (1) 3½” x WOF strip; Subcut (1) 3½” square and (2) 3” squares. Cut the 3½” square twice on the diagonal to make (4) quarter square triangles. Cut each of the 3” squares once on the diagonal to make (4) half-square triangles.
From Red/White Stripe Fabric
- Cut (1) 2¾” x WOF strips; Subcut (8) 2¾” squares.
From Navy/white Stripe Fabric
- Cut (1) 2¾”x WOF strips; Subcut (8) 2¾” squares.