noctua NV-PS1 24W AC Power Supply For Powering 12V PC Fans Wall Outlets User Manual
- July 12, 2024
- Noctua
Table of Contents
noctua NV-PS1 24W AC Power Supply For Powering 12V PC Fans Wall Outlets
User Manual
The NV-PS1 is a compact, premium grade 24W AC/DC power supply that’s ideal for
powering 12V fans off the mains for home, office or multi-purpose ventilation
tasks.
With full CE and UKCA compliance, safety certifications from UL and TÜV as
well as protection against over current, over voltage and short circuits, the
NV-PS1 is a safe quality device through and through.
NV-PS1 SPECIFICATIONS
| Input voltage | 90~264 V AC |
|---|---|
| Input frequency | 47~63 Hz |
| Standby power consumption | 0.075 W |
| Protection | Over voltage, over current, |
short-circuits
Protection class| II
Operating temperature| 0~40 °C
Operating humidity| 8~90 %
Safety standards| EN 60950-1:2006+A11+A1+A12+A2, EN 62368-1, IEC 62368-1:2014,
UL 60950-1 (2nd Edtion), CAN/CSA C22.2 No. 60950-1-07 (2nd Edition)
EMC standards| EN 55032 Class B, FCC Part 15 Subpart B Class B
Input connectors (included)| type C (CEE 7/16, for Europe, Russia, Brazil,
South Africa, etc.), type A (NEMA 1-15, for USA, Canada, Mexico, Japan, etc.)
and type G (BS 1363, for UK, Ireland, Singapore, etc.)
Output connector| 5.5mm (outer diameter) / 2.1mm (inner diameter) barrel with
NA-AC10 4-pin PWM adaptor cable
Cable length| 1.5 m
Warranty| 6 years
NV-PS1 power supply
US socket adaptor (Type A)
EU socket adaptor [Type
UK socket adaptor [Type
NA-AC10 barrel to 4-pin adaptor cable
Setup
The NV-PS1 includes modular connectors for type C (CEE 7/16, for Europe,
Russia, Brazil, South Africa, etc.), type A (NEMA 1-15, for USA, Canada,
Mexico, Japan, etc.) and type G (BS 1363, for UK, Ireland, Singapore, etc.)
plugs.
To assemble the power supply, simply slide the chosen socket adaptor onto the
main NV-PS1 device until it clicks into place.
To remove or switch the socket adaptor to a different socket type, hold down the release button and slide it back up, as shown.
The included NA-AC10 adaptor cable allows for connecting 3-pin and 4-pin PWM
fans to the NV-PS1’s 5.5mm barrel connector. Simply insert the NA-AC10 adaptor
between the primary fan cable and the power supply.
Setup Fan hubs and controllers
With a maximum output power of 24W, the NV-PS1 has the capacity to run several
high-speed fans using optional NA-YC1 y-cables or fan hubs such as the NA-FH1
(via the NA-AC10 adapter) or NV-FH2 (via the NV-PS1’s barrel connector).
Additionally, the NV-PS1 can also be combined with the optional NA-FC1
controller in order to manually adjust the RPM speed of 4-pin PWM fans. When
used with NA-YC1 splitter cables or NA-FH1 fan hubs, the NA-FC1 can be
interconnected for controlling multiple fans simultaneously
Example setups
Application example 1
Application example 2
Application example 3
Warranty & support
Even with high-grade products and strict quality control, the possibility of
defects cannot be eliminated entirely. Therefore, we aim at providing the
highest possible level of reliability and convenience by offering a warranty
period of 6 years and direct, fast and straightforward RMA service.
Should you encounter any problems with your NV-PS1, please don’t hesitate to
contact our support team at support @noctua.at. Please also consult the FAQ
section on our website: faqs.noctua.a
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>