thdstatic WS-FPZ108-14-8BG LED Driver Installation Guide
- July 12, 2024
- thdstatic
Table of Contents
thdstatic WS-FPZ108-14-8BG LED Driver
Product Information
Product Specifications:
- Model: WS-FPZ108-14-8BG
- Input Voltage: 110-120V/220-240V 50/60Hz
Product Usage Instructions
Pre-Installation Steps:
- Open the packaging and inspect the lighting fixtures for any damage.
- Conduct a power-on test to ensure the fixtures can light up.
- Check if the hanging location can support the weight of the lamp.
- Turn off the power before installation and have a professional electrician handle the installation.
- Ensure the power supply used is within the specified range for the lighting fixture.
Tools Required:
- Character test pen
- Hammer
- Pistol Drill
- Pincer pliers
- Spanner
Installation Steps:
- Drill holes in the ceiling corresponding to the Anchor.
- Insert the Anchor into the hole.
- Connect the power cord correctly and push the lamp body up to the ceiling.
- Secure the lamp body on the ceiling with hanging plate screws and ensure stability.
- Turn on the power to test if the lighting fixture lights up.
Frequently Asked Questions
-
Q: What should I do if my lighting fixtures are damaged upon unpacking?
A: If you notice any damage, deformation, or missing parts, please contact customer service promptly for assistance. -
Q: Can I install the lamp on a wooden ceiling without using expansion screws?
A: Yes, for wooden ceilings, you can use tapping screws directly to secure the lamp without expansion screws. -
Q: How can I contact customer service for after-sales support?
A: For after-sales service, customers in the USA and Canada can reach out via email at all-support@depuley.com. Customers from other countries are advised to contact us via email as well.
Important Instruction
- Open the packaging and check if the lighting fixtures are intact. The lighting fixtures and accessories should be complete and free of mechanical damage, deformation, paint peeling, and lampshade breakage. If you have any questions, please contact customer service promptly.
- Before installing the lighting fixtures, a power-on test should be conducted to confirm that they can light up.
- Check if the place where the lamp is hung can withstand the weight of the lamp.
- Please turn off the power before installation. For the quality and safety of the lamp, please have a professional electrician operate it.
- Please do not exceed the range specified by the lighting fixture for the power supply used.
Tools
Installation steps
- Drill the holes corresponding to the Anchor on the ceiling.
- Insert the Anchor into the hole.
- Push the lamp body up to the ceiling and connect the power cord correctly.
- First, fix the lamp body on the ceiling with hanging plate screws and confirm its stability.
- Turn on the power and test if the lighting fixture can light up.
Note:
If it is a wooden ceiling, there is no need for expansion screws. S, tapping
screws can be used directly to lock it.
Wiring
Current range of telephone after-sales service
- Language: English only Country: USA and Canada
- Customers from other countries are advised to contact us via email. AFTER-SALES all-support@depuley.com.