CHEFMASTER HEG491, HEG492 Warming Lamp Instruction Manual

July 12, 2024
ChefMaster

CHEFMASTER HEG491, HEG492 Warming Lamp

Product Information

Specifications

  • Model HEG491:
    • Voltage: 220v 50/60Hz
    • Power: 250 watt
    • Weight: 4.25kg
    • Dimensions: 300 x 160 x 700mm
  • Model HEG492:
    • Voltage: 220v 50/60Hz
    • Power: 2 x 250 watt
    • Weight: 4.8kg
    • Dimensions: 300 x 160 x 700mm

Product Usage Instructions

Safety Tips

  • Always supervise individuals with limited physical or mental capabilities when using the Chefmaster Warming Lamp, including children.

Pack Contents

  • Ensure all parts mentioned in the pack contents list are present before assembly.

Assembly Instructions

  • Follow the assembly instructions provided in the manual carefully to set up the Warming Lamp correctly.

Operation

  • Switch on the unit and ensure the bulb heats up properly. Refer to troubleshooting if any issues occur.

Cleaning & Maintenance

  • Regularly clean and maintain the Warming Lamp to ensure optimal performance. Follow the cleaning guidelines provided in the manual.

Transportation and Storage

  • Handle the Warming Lamp with care during transportation and store it in a well-ventilated, non-corrosive gas environment. Avoid storing flammable objects near the equipment.

Disposal

  • Follow proper disposal guidelines when disposing of the Chefmaster Warming Lamp.

FAQ

Issue: The unit is switched on, but the bulb is not heating.

Possible Causes

  • The unit is not plugged in.
  • The plug or lead is damaged.
  • The fuse has blown.
  • The bulb is not inserted properly.
  • The bulb has failed.

Solution

  • Check if the unit is plugged in and switched on.
  • Contact your Chefmaster distributor for assistance.
  • Replace the fuse if necessary.
  • Remove and re-insert the bulb properly.
  • Replace the bulb if it has failed.

Thank you for purchasing your Chefmaster Warming Lamp. To make full use of the product please read this manual carefully before using the product and keep it safe for future reference.

Safety Tips

  • If you find any damage when the product is unpacked, contact your Chefmaster supplier within 24 hours of receipt of the goods
  • Always position on a flat stable surface
  • Repairs should always be carried out by a qualified technician
  • Never touch the lampshade when the product is on or recently after use.
  • Do not fit or remove the bulb when the unit is on
  • Do not use this product outside
  • Do not carry when the lamp is hot
  • Always switch off and unplug the unit before cleaning
  • If the power cord becomes damaged it must be replaced by a qualified technician
  • This product is not designed to be used by persons with reduced physical or mental capabilities, lack of experience or knowledge, unless they are given suitable supervision, this includes children.

Pack Contents

  • 1 x Chefmaster Warming Lamp
  • HEG491: Bulb X 1
  • HEG492: Bulb X 2

Assembly Instructions

  • Remove all packaging including all protective plastic from your Chefmaster Warming Lamp
  • Position the base on a flat surface
  • Plug your Chefmaster Warming Lamp into the main
  • The Warming Lamp will now be ready to turn on

Operation

  • Place food into a heat-proof tray, a stainless steel or ceramic GN pan
  • Plug the Warming Lamp into the mains and switch on
  • The bulbs will now be on and heating up

Cleaning & Maintenance

  • Before cleaning, disconnect the warming lamp from the electricity supply.
  • Use a soft damp cloth to clean the frame of the Warming Lamp. Only clean the lampshade when it has cooled down.
  • DO NOT submerge the Warming Lamp in water or use water sprays to clean it
  • Always clean your Chefmaster Warming Lamp daily

Troubleshooting

Fault Possible Cause Solution
The unit is switched on, but the bulb is not heating The unit is not plugged

in

The plug or lead is damaged The fuse has blown

The bulb was not inserted properly The bulb has failed

| Check the unit is plugged in and switched on

Contact your Chefmaster distributor

Replace the fuse

Remove the bulb and re-insert Replace the bulb

Transportation and Storage

  • Please handle your Warming Lamp with care to prevent any damage to the unit and internal parts.
  • The Warming Lamp should be stored somewhere which is ventilation and non-corrosive gas.
  • Do not store any flammable objects near the equipment.

Technical Information

HEG491

  • Voltage:220v 50/60Hz
  • Power 250 watt
  • Weight 4.25kg
  • Dimensions 300 x 160 x 700mm

HEG492

  • Voltage: 220v 50/60Hz
  • Power 2 x 250 watt
  • Weight 4.8kg
  • Dimensions 300 x 160 x 700mm
  • Chefmaster Warming Lamp is supplied with a 3-pin plug and lead with a 13 amp fuse
  • The appliance must be earthed
  • If in doubt contact a qualified electrician or your Chefmaster distributor

Disposal

  • Under WEEE regulations this product must not be disposed of as household waste. To prevent damage to the environment and humans this product must be disposed of in an approved and environmentally friendly recycling process.
  • For more information on how to dispose of this correctly please contact your Chefmaster distributor or local authority responsible for waste disposal.

Compliance

  • All Chefmaster parts and products have undergone a stringent testing process to ensure that comply with all European standards and specifications.
  • All Chefmaster products carry the CE approval symbol.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals