NEURIEDE X399 3 in 1 Fast Wireless Charger Pad User Guide
- June 3, 2024
- NEURIEDE
Table of Contents
NEURIEDE X399 3 in 1 Fast Wireless Charger Pad
Product Overview
Specifications
- Model X399
- Material Environmental protection ABS+ temper-ed glass
- Size 204X80X7.8MM
- Colour Black White
- Interface Type-CUSB
- Input Current >9V-2A, SV-3A
- Phone output l5W/l0W/7.5W/5W
- Watch output 2.5W
- Headphone output 3W
- Adapter >9V－2A，5V-3A
- Compatibility Supports mobile phones, Bluetooth headsets, and Apple Watches that meet the Qi standard
- Product List Wireless charger xl, charging cable xl, manual xl
The use steps
- The device Is connected to the power supply through the charglng cable and starts to work in a powered state.
- When charging the mobile phone, place the mobile phone in the charging area of the mobile phone, and after 0.1 seconds, start charging the mobile phone; When fully charged, just remove the phone; during the charging process, if you need to term inate the charging, directly Just take off the phone.
- When charging the Apple Watch, place the watch flat on the watch charging area, and after.1 second, start charging the watch; When fully charged, just remove the phone; if you need to terminate the charge during the charging process, just remove the watch.
- When charging the Bluetooth headset, place the headset flat on the headset charging area, and after 0.1 seconds, start charging the headset; When fully charged, just take off the headset; during the charging process, if you need to terminate the charging, take just drop the headset.
Warranty instructions
If there is no obvious appearance of material damage under normal use, the warranty shall be calculated for 12 months from the day of purchase; the warranty service shall provide proof of purchase; users should not try to open or disassemble the device, which may causesecondary damage to the product. Your warranty service is invalid.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator & your body
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>