tp-link AC600 Wireless Dual Band PCI Express Adapter Archer T2E User Guide

tp-link AC600 Wireless Dual Band PCI Express Adapter Archer T2E

Specifications

• Product: AC600 Wireless Dual Band PCI Express Adapter Archer T2E
• Wireless Bands: Dual-band (2.4 GHz and 5 GHz)
• Wireless Standard: 802.11ac
• Interface: PCI Express
• LED Status Indicator : Yes

Product Usage Instructions

Get to Know About Your Adapter

• This chapter provides an overview of the adapter and explains the LED status indicators.

Product Overview

• Learn about the details of the adapter and its features.

LED Status

• Understand the LED status indicators to check the working status of the adapter.

Connect to a Computer

This chapter explains how to physically connect the adapter to your computer.

1. Turn off your computer, unplug the power cable, and remove the case panel.
2. Locate an available PCI Express slot and carefully insert the adapter.
3. Connect the antenna to the adapter.
4. Replace the case panel, plug in the power cable, and turn on your computer.

Use Your Adapter

• This chapter covers driver installation, joining a wireless network, and uninstalling drivers.

Install Driver

• Follow the provided instructions to install the necessary drivers for the adapter.

Join a Wireless Network

• Learn how to connect your adapter to a wireless network for internet access.

Uninstall Driver

• If needed, follow the steps to uninstall the drivers for the adapter.

Frequently Asked Questions

Q: What should I do if the LED indicator is off?

A: If the LED is off, try removing and reinstalling the adapter.
Check if it is recognized and enabled in Troubleshooting-T2.
Reinstall the adapter software if necessary.

About This Guide

• This guide is a complement to the Quick Installation Guide. The Quick Installation Guide instructs you on quick installation, and this guide provides the product overview and more detailed instructions for each step.
• When using this guide, please notice that features available of the adapter may vary by model and software version. It may also vary by region or ISP.
• All images, steps, and descriptions in this guide are only examples and may not reflect your actual experience.

Conventions

In this guide, the following conventions are used.

to redirect to a website or a specific section.
Teal| Contents to be emphasized and texts on the web page are in teal, including the menus, items, buttons, etc.
Note:| Ignoring this type of note might result in a malfunction or damage to the device.
Tips:| Indicates important information that helps you make better use of your device.

• Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) AP limitations, including rated performance, location, connection quality, and AP condition.
• The use of MU-MIMO and WPA3 requires both the AP and the system to support the corresponding features.

More Info

• The latest driver can be found at the Download Center at https://www.tp-link.com/support.
• The Quick Installation Guide (QIG) can be found where you find this guide or inside the package of the product.
• Specifications can be found on the product page at https://www.tp-link.com.
• A TP-Link Community is provided for you to discuss our products at https://community.tp-link.com.

Get to Know About Your Adapter

This chapter introduces the detail of the adapter.

Product Overview

• The Archer T2E receives Wi-Fi signals on two separate bands for all your online needs. Choose the 2.4 GHz band for browsing, email, and social media, or switch to the 5 GHz band for gaming and streaming.
• The Archer T2E can work with MU-MIMO routers, which provide simultaneous data streams, boosting throughput and efficiency.
• Standards: IEEE 802.11b/g/n 2.4GHz, IEEE 802.11a/n/ac 5GHz
• Interface: PCI Express
• Antenna: 1 Detachable External Antenna
• LED: Status
• Security: WEP, WPA/WPA2/WPA3, WPA-PSK/WPA2-PSK/WPA3-SAE
• Dimensions: 4.76 × 3.09 × 0.85 in (120.8 × 78.5 × 21.5 mm)

LED Status

You can check the adapter’s working status by following the LED Explanation table.

Tips:

If the LED is off, try these troubleshooting tips.

1. Remove and reinstall the adapter.
2. Refer to Troubleshooting-T2 to check if the adapter is recognized and enabled. Reinstall the adapter software, if necessary.

Connect to a Computer

• This chapter introduces how to connect the adapter to your computer. Please note that images are for demonstration only.

Follow the steps below to insert the adapter into your computer:

1. Turn off the computer, unplug the power cable, and remove the case panel.
2. Locate an available PCI-E slot and carefully insert the adapter.
3. Connect the antenna to the adapter.
4. Replace the case panel, plug in the power cable, and turn on your computer.
   • Note: If the bracket is not suitable for your computer, detach it from the adapter’s board and replace it with the low-profile bracket provided.

Use Your Adapter

This chapter introduces how to install or uninstall your adapter’s Wi-Fi driver and connect to a wireless network on a Windows system.

This chapter includes the following sections:

• Install Driver
• Join a Wireless Network
• Uninstall Driver

Install Driver

Follow the steps below to set up your adapter:

1. Insert the resource CD into your CD drive and run the Autorun.exe.
   • Note: You can also download the latest driver from the product’s Support page at www.tp-link.com.
2. Select Archer T2E and follow the instructions to continue the installation.
   • Note: If you can’t install the driver successfully, disable the antivirus software and firewall, then try again.
3. When the following screen appears, the driver has been installed successfully.

Join a Wireless Network

• You can join a wireless network via Windows Wireless Utility.
• Follow the instructions below to use your computer system’s built-in wireless utility.

1. Click the Wireless Network icon on the taskbar (it may look like one of these:
2. Select the Wi-Fi network you want to join, and click Connect. Enter the network password when prompted.

Uninstall Driver

The software uninstallation steps vary a bit in different systems, please follow the appropriate instructions for your Windows operating system: Windows 10 & 11.

1. Go to Start > Apps, and find the TP-Link application.
2. Click Uninstall TP-Link Archer T2E, then follow the on-screen instructions to complete the uninstallation.

Appendix Troubleshooting

1. What should I do if the adapter is not detected?
   • Make sure the adapter is securely located in the appropriate PCI-E slot.
   • Make sure you meet the system requirements for the adapter.
   • Make sure you use the latest driver for your specific adapter. The latest drivers can be found on the product’s Support page at https://www.tp-link.com.
   • Try restarting the computer or try the adapter on a different computer.
2. How to check if I have installed the drivers successfully or not?
   • Check your taskbar if there is a Wi-Fi icon. If you can see the Wireless Network icon on the taskbar, you have already installed the Wi-Fi driver successfully.
3. What should I do if can’t connect to the Wi-Fi after installing the driver?
   • Refer to T2 to check if you have installed the driver for your adapter successfully.
   • Disable the antivirus software and firewall, then try again.
   • Try a different PCI-E slot on the computer.
   • Restart your computer and try again.
   • Reinstall the driver and try again.
4. How to find the hardware version of the adapter?
   • The hardware version is printed on the product label on the package or the adapter. There is a character string “Ver: X.Y” (for example, Ver:1.0) in the Serial Number field, and the number X is the hardware version of the adapter.

For more detailed instructions:

• Can’t find the hardware version of the adapter: https://www.tp-link.com/faq-46.html
• Can’t find or connect to the wireless networks: https://www.tp-link.com/faq-2253.html
• Can’t install the driver: https://www.tp-link.com/faq-2252.html

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant applies to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. We, TP-Link USA Corporation, have determined that the equipment shown above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made to the equipment and the equipment is properly maintained and operated.

CE Mark Warning

• This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

OPERATING FREQUENCY(the maximum transmitted power)

• 2400MHz—2483.5MHz(20dBm)
• 5150MHz—5250MHz(23dBm)
• 5250MHz—5350MHz(23dBm)
• 5470MHz—5725MHz(23dBm)
• EU declaration of conformity
• TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of directives 2014/53/EU, 2011 /65/EU, and (EU) 2015/863.
• The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/

UK declaration of conformity

• TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
• The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/

RF Exposure Information

• This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.
• The device complies with RF specifications when the device is used at 20 cm from your body.

Frequency band: 5150 – 5250 MHz:

• Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted.
• Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or the external body of road vehicles, a fixed infrastructure, or a fixed outdoor antenna.
• Use by unmanned aircraft systems (UAS) is limited to within the 5170 – 5250 MHz band.

Frequency band: 5250 – 5350 MHz:

• Indoor use: Inside buildings only. Installations and use in road vehicles, trains, and aircraft are not permitted. Outdoor use is not permitted.

Frequency band: 5470 – 5725 MHz:

• Installations and use in road vehicles, trains, and aircraft and use for unmanned aircraft systems (UAS) are not permitted.

Attention: This device may only be used indoors in Great Britain.

Canadian Compliance Statement

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This radio transmitter (IC: 26583-T2E / Model: Archer T2E) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list below, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

Antenna One detachable external antenna

Caution:

1. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
2. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
3. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Safety Information

• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use the device where wireless devices are not allowed.
• This equipment can be powered only by equipment that complies with Power Source Class 2 (PS2) or Limited Power Source (LPS) defined in the standard of IEC 62368-1.
• Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device.
• Please use this product with care and operate at your own risk.
• This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices.
• Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices.
• If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device.

Environment

• Operating Temperature: 0℃~40℃ (32℉~104℉)

Explanation of the symbols on the product label

• Symbols may vary from product.
• Product Name: AC600 Wireless Dual Band PCI Express Adapter
• Model Number: Archer T2E
• Responsible party: TP-Link USA Corporation
• Address: 10 Mauchly, Irvine, CA 92618
• Website:http://www.tp-link.com/us/
• Tel: +1 626 333 0234
• Fax: +1 909 527 6804
• E-mail:sales.usa@tp-link.com

References

• Link: Simple, secure one-click payments
• WiFi Networking Equipment for Home & Business | TP-Link
• TP-Link Community
• CE Regulatory Compliance | TP-Link
• Difficulties Experienced While Installing a TP-Link Wireless Adapter
• Why cannot I connect to my wireless network | TP-Link
• How to find the hardware version on a TP-Link device
• TP-Link Product Support - Wireless Networking Equipment Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>