MRSCOZ M67 RGB Music Aurora Projector Lamp Instruction Manual
- July 10, 2024
- MRSCOZ
Table of Contents
— Instruction Manual —
RGB Music Aurora Projector Lamp
Accessory Description
RGB Music Aurora Projector Lamp x1
Remote Control x 1 Data Cable x 1 Manual x 1
Button Description
Short Press: Aurora Projection-On/Color Switching/Off
Double Press: Rhythmic Mode-On/Off
Long Press: Off
Short Press: Galaxy Projection-On/ Off
Long Press: Moonlight Projection- On/ Off
Short Press: RGB Mode Switching (Warm light/Monochrome Rhythmic/Colour
Rhythmic/Rhythmic Beating)
Long Press: Brightness Adjustment
Long Press: Speaker-On/Off
Double Press: Cutting off the Connection
Speaker Connection: The speaker automatically enters the search mode when
it is turned on. Find “M67” in the connection page of mobile device to
connect. (The speaker will turn off automatically if it hasn’t been connected
for 10 minutes.)
This product has a 4-hour automatic shutdown function, can work continuously for 4 hours and automatically shut down.
Remote Control Instruction
-
Main Switch (On Tip: Blinks Twice)
-
Rhythmic Mode Switch
-
Aurora Brightness Reduction
-
Aurora Switch/Color Switch
-
Aurora Brightness Increase
-
RGB Brightness Decrease
-
RGB Mode Switching (four modes)
-
RGB Brightness Increase
-
Speaker-Volume Decrease
-
Speaker-On/Off
-
Speaker-Volume Increase
-
Previous Song
-
Play/Pause
-
Next Song
-
Galaxy Projection
-
Aurora Projection (three modes)
-
Moonlight Projection – On/Off
-
Timing (0.5 hours, 1 hour)
Red Aurora Blinking: Timed on
Green Aurora Blinking: Timed off -
White Noise Switching (five sounds)
Product Parameter
Product Name: RGB Music Aurora Projector Lamp
Model No: M67
Material: ABS/PC
Product Size: 120 x 120 x 101mm
Net Weight: ≈ 335g
Input: USB DC5V/2A
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception,which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>