SHENZHEN UTEPO Tech Co Ltd UBG3 Outdoor CPE Installation Guide

SHENZHEN UTEPO Tech Co Ltd UBG3 Outdoor CPE

a

Product Specifications

• Model: CPE Device
• Wireless Frequency: 5.8GHz
• IP Address: 192.168.188.253
• Wireless SSID: 5.8G/Wireless 5.8G_XXXXXX
• Login Password: admin

Product Usage Instructions

Login Web Configuration
Use Internet Explorer to access http://192.168.188.253, and enter the login password as ‘admin’ to access the homepage.

Configure Wireless

• Using a laptop or mobile phone, test the wireless network by clicking on the wireless network, selecting the wireless SSID, and inputting the password to check for online connectivity.
• Check the wireless network connection status, signal strength, speed, transmission, and data by clicking on network connection details to verify IP address and DNS server address.

Login WEB by Mobile Phone

1. Connect your mobile phone to the outdoor CPE using SSID: 5.8G/Wireless 5.8G_XXXXXX and wireless key: 66666666.
2. Enter ‘192.168.188.253’ in the internet explorer bar and input ‘admin’ to login to the mobile configuration page.

Frequently Asked Questions (FAQ)

• Q: What should I do if I encounter trouble connecting to the wireless network?
  Solution
  

  • Check if the CPE device is set up correctly in Repeater or AP mode using the Setup Wizard.
  • Ensure that the wireless network connection details show correct IP address and DNS server address.
  •  Verify that the wireless bridge regional channel code matches the settings in your device.

• Q: What do I do if my mobile phone cannot connect to the CPE?
  Solution
  

  • Make sure you are using the correct SSID and wireless key for connection.
  • Double-check the IP address ‘192.168.188.253’ and login password ‘admin’ for accessing the mobile configuration page.

Outdoor CPE
Quick Installation Guide

Device installation

Passive PoE Adapter supports up to 60 meters (200 feet) Power over Ethernet deployment

Wireless Connection Topology

LED Display CPE

1. Default working mode is Slave CPE or Client, IP: 192.168.188.253
2. Set one CPE to Master CPE or Host, in LED Display will start with “H”:
3. Master CPE channel must be same as Slave CPE:
4. Press Reset 1 second on both side, the two outdoor devices will start bridging:

WEB Configuration

1. PC configuration if PC connect CPE by wireless
   Connect to CPE’s wireless SSID: Wireless 2.4G_XXXXXX/\/Vireless 5.SG/\Nireless 5.BG_XXXXXX, wireless key: 66666666.
   Set PC wireless network IP to 192.168.188.x(x: 11-200), same network segment as CPE, subnet mask: 255.255.255.0

2. PC configuration if PC connect CPE wired
   If connect PC and CPE wired, Set PC local network IP to 192.168.188.x{x: 11-200),same network segment as CPE, subnet mask: 255.255.255.0:

3. Login Web Configuration
   Use IE browser to access http: l/192.168.188.253. pop up the login page shown below. input the login password: admin. ente『 into the home page
   

Using Setup Wizard  the CPE device can be set up to Repeater and AP mode

• Repeat mode
  Bridge the exist wireless signal then transmit Wi-Fi for more range

• AP mode
  In this mode, NAT, DHCP, firewall, and all WAN-related functions are turned off. All wireless and wired interlaces are bridged together, regardless of LAN and WAN

• Configuration method
  According to the quickly setup wizard of each mode shown in the above figure, set the parameters and options based on user needs, click next until the setting of each step is completed

Configure Wireless

• Use a laptop or mobile phone to test the wireless network Internet, click on the wireless network, select the wireless SSID, input the password to test whether PC or mobile phone can be online
• Check the wireless network connection status, signal strength and speed, transrnis­sion and data, click network connection details to see if the IP address and DNS server address are correctly obtained, confirm device is working properly.

Login WEB by Mobile Phone
Outdoor CPE supports mobile phone Login and set, the configure page showed as follow

1. Mobile phone connect with outdoor CPE, SSID: 5.8G/Wireless 5.8G_XXXXXX, wireless key: 66666666
2. Configure static IP:
   • Android Moblle Phone: Open settings in phone, turn on WLAN and find the SSID of the CPE, access to wireless network settings then choose “static IP” in the menu, set the mobile phone IP address as 192.168.188.x (x: 11–200) same network segment as CPE, subnet mask: 255.255.255.0, then gateway, subnet mask and domain.
   • 10S Mobile Phone: Open settings and choose wi-fi connects with CPE, click exclamation mark(!) , manual set IP address 192.168.188.x (x : 11–200) same network segment as CPE, subnet mask: 255.255.255.0, then gateway, subnet mask and domain.
3. Input 192.168.188.253 on the internet explorer bar, input admin to login the mobile configurations page
4. Login password: admin

Channel Table

Wireless Bridge Regional Channel Code Instructions

Reglonal Code| 5G Channel|
---|---|---
| 5.500GH,| (Channel 100)
5.520GH,| (Channel 104)
5.540GH,| (Channel 108)
5.560GH,| (Channel 112)
5.580GH,| (Channel 116)
5.600GH,| (Channel 120)
5.620GH,| (Channel 124)
5.640GH,| (Channel 128)
5.660GH,| (Channel 132)
5.680GH,| (Channel 136)
5.700GH,| (Channel 140)

(Note: for the frequencies above indicated the DFS function must be activated)

Troubleshooting

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates.uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>