IKEA VARMFRONT Portable Charger 5200 mAh Instruction Manual
- July 9, 2024
- Ikea
Table of Contents
IKEA VARMFRONT Portable Charger 5200 mAh
Specifications
- Type: E2037
- Capacity: 5200mAh/18.72Wh
- Input: 5.0Vdc, max 2.1A (USB-C)
- Output: 5.0Vdc, 2.4A, 12W total (USB-C, USB-A)
- Technical Data: Rechargeable Li-Ion battery cell inside
- Manufacturer: IKEA of Sweden AB
- Disposal: The item should be disposed of separately from household waste and handed in for recycling.
Product Usage Instructions
Charging the Power Bank
- Connect the USB-C cable to the power bank.
- Connect the other end of the USB cable to a USB charger or outlet with sufficient power.
- The LED indicators will show the charging status.
Using the Power Bank
- To check the remaining charge and readiness of the USB-A port, single press the POWER button.
- Double press the POWER button to ready the USB-A port for use.
- To switch between small current supply power mode and normal supply power mode, long press the POWER button.
Cleaning and Servicing
- To clean, wipe with a soft cloth moistened with mild detergent and then dry with another cloth.
- Do not attempt to repair the product yourself to avoid risks.
Frequently Asked Questions
Q: What should I do if the power bank is not charging my device?
A: Ensure that the USB cable is properly connected and that the power bank has sufficient charge. Try using a different cable or power source.
Q: How do I know when the power bank is fully charged?
A: The LED indicators will show when the power bank is fully charged. You can also check the charging status by pressing the POWER button.
Functions
- POWER button
- LED indicators
- USB-C (charging and supply power)
- USB-A (only supply power)
Usage Instructions
Charging power bank
- Connect the USB-C cable to the USB-C port of the power bank first and then connect the USB cable to a USB charger or USB outlet that can provide sufficient power to charge the power bank. The LED indicators will display the charging status.
Supply power to devices
- Connect the USB cable to the USB-C or USB-A port of the power bank first and then connect the USB cable to the device that you want to charge.
- The power bank will detect a connected device and start charging automatically.
- The LED indicators will display the remaining charge in the power bank during discharging.
Check power status
- Click once on the POWER button and the LED indicators will light up and indicate the remaining power status.
- If the USB cable is not disconnected while the charging process finishes, push the POWER button first to restart the charging.
Small current supply mode
- Press the POWER button for 8 seconds when your device is being charged.
- The function is mainly used to charge certain wearable electronic devices. When charging a device that needs a charging current of less than 100mA via a USB-A port, this mode should be activated.
- You can press the button for 3 seconds to exit this mode, it also automatically closes after 2 hours.
Good to know
- USB cable length and quality influence charging speed and performance.
- Devices may get warm during charging; this is completely normal and they will gradually cool down again after they are fully charged.
- Charging time may vary based on the device’s battery capacity, charge level, the age of the battery, and the temperature in the surrounding area.
- Storage temperature: -10°C to 25°C.
- Power bank operating temperature: 0°C to 40°C.
- Unplug the power bank from the power source before cleaning and when it is not in use.
- Power bank should not be left discharged for a longer period.
- Power banks should not be charged while in contact with flammable materials like textiles.
WARNING
- Do not modify, disassemble, open, drop, crush, puncture, or shred the product.
- Only use in dry locations.
- Risk of fires and burns. Do not open, crush, heat above 60°C (140°F) or incinerate.
- Do not subject the product to wet, moist, or excessively dusty environments since this can cause damage to the unit.
- Keep the product away from open flames or sunlight to prevent heat buildup.
- Keep the product away from high-voltage devices.
- Children should be supervised to ensure they do not play with the product.
- Do not short-circuit the product or its cells.
- In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes.
CARE INSTRUCTION
- To clean the unit, wipe with a soft cloth moistened with a little mild detergent. Use another soft dry cloth to wipe dry.
Product Servicing
- Do not attempt to repair this product yourself. If you open or remove parts, you may expose yourself to dangerous voltage points or other risks.
Power button function (E2037)
Current mode| Sleeping mode| Charging mode| Supply
power mode
---|---|---|---
Single press| Shows via LED the remaining charge and that USB-A is
ready to use.| USB-A is ready to use.| No action
Double press| No action| No action| Stop supplying power
Long press| No action| No action| No action Switch to the small current
supply power mode or back to normal supply power mode
TECHNICAL DATA
- Type: E2037
- Capacity: 5200mAh/18.72Wh
- Input: 5.0Vdc, max 2.1A (USB-C)
- Output: 5.0Vdc, 2.4A, 12W total (USB-C, USB-A)
- When both ports are used at the same time, they share 5.0V/2.4A in total.
For indoor use only
- Rechargeable Li-Ion battery cell inside.
- Manufacturer: IKEA of Sweden AB
- Address: Box 702 SE-343 81 Älmhult SWEDEN
- The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste.
- The item should be handed in for recycling under local environmental regulations for waste disposal.
- By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or landfills and minimize any potential negative impact on human health and the environment.
- For more information, please contact your IKEA store.
- Complies with IMDA Standards DA106634
- © Inter IKEA Systems B.V. 2023 AA-2398307-7
Read User Manual Online (PDF format)
Loading......