behringer 121 DUAL VCF Legendary Analog Dual VCF Module for Eurorack User Guide

behringer 121 DUAL VCF Legendary Analog Dual VCF Module for Eurorack

Specifications

• Product Name: 121 DUAL VCF
• Type: Analog Dual VCF Module for Eurorack
• Version: 3.0

Product Information:
The 121 DUAL VCF is a legendary analog dual VCF module designed for Eurorack systems. It features high-quality components and  precise controls for shaping your sound.

Product Usage Instructions

Safety Instructions:

1. Read and follow all instructions provided in the user manual.
2. Avoid water contact, especially for outdoor use.
3. Clean the module only with a dry cloth.
4. Ensure proper ventilation by not blocking any openings.
5. Avoid placing near heat sources or naked flames.
6. Use only manufacturer-specified attachments and accessories.
7. Use recommended carts, stands, or tables to prevent tip-overs.
8. Avoid installation in confined spaces or near flame sources.

Power Connection

The module comes with a power cable for connecting to a standard Eurorack power supply system. Follow these steps:

1. Turn off the power supply or rack case and disconnect the power cable.
2. Connect end P1 to the module socket and end P2 to the power supply.
3. Insert the 16-pin connector on the power cable into the socket on the power supply or rack case.

FAQ:

Q: Where can I find warranty information for the product?
A: For warranty terms and conditions, visit community.musictribe.com/support for complete details.

Safety Instruction

1. Please read and follow all instructions.
2. Keep the apparatus away from water, except for outdoor products..
3. Clean only with a dry cloth.
4. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
5. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
6. Use only attachments/accessories specified by the manufacturer.
7. Use only specified carts, stands, tripods, brackets, or tables. Use caution to prevent tip-over when moving the cart/apparatus combination.
8. Avoid installing in confined spaces like bookcases.
9. Do not place near naked flame sources, such as lighted candles.
10. . Operating temperature range 5° to 45°C (41° to 113°F).

LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property
of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2024 All rights reserved.

121 DUAL VCF Controls

Controls

1. SIG IN – Connect incoming signals via 3.5 mm TS cable.
2. SIG LEVEL – Adjust the level of the signals connected to the inputs.
3.  VCF OUT – Send the VCF signal to other modules via 3.5 mm TS cable.
4.  CUTOFF – Adjust the cutoff frequency of the low-pass filter.

Power Connection

The module comes with the required power cable for connecting to a standard Eurorack power supply system. Follow these steps to connect power to the module. It is easier to make these connections before the module has been mounted into a rack case.

1.  Turn the power supply or rack case power off and disconnect the power cable.
2. Insert the 16-pin connector on the power cable into the socket on the power supply or rack case. The connector has a tab that will align with the gap in the socket, so it cannot be inserted incorrectly. If the power supply does not have a keyed socket, be sure to orient pin 1 (-12 V) with the red stripe on the cable.
3. insert the 10-pin connector into the socket on the back of the module. The connector has a tab that will align with the socket for correct orientation.
4. After both ends of the power cable have been securely attached, you may mount the module in a case and turn on the power supply.

Installation

The necessary screws are included with the module for mounting in a Eurorack case. Connect the power cable before mounting.
Depending on the rack case, there may be a series of fixed holes spaced 2 HP apart along the length of the case, or a track that allows individual threaded plates to slide along the length of the case. The free-moving threaded plates allow precise positioning of the module, but each plate should be positioned in the approximate relation to the mounting holes in your module before attaching the screws.
Hold the module against the Eurorack rails so that each of the mounting holes are aligned with a threaded rail or threaded plate. Attach the screws part way to start, which will allow small adjustments to the positioning while you get them all aligned. After the final position has been established, tighten the screws down.

Specifications

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

• Behringer
• 121 DUAL VCF
• Responsible Party Name: Music Tribe Commercial NV Inc.
• Address: 122 E. 42nd St.1,
• 8th Floor NY, NY 10168,
• United States
• Email Address: legal@musictribe.com

121 DUAL VCF

This equipment has been tested and found to comply with  the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Important information:

Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.

• Hereby, Music Tribe declares that this product is in compliance with Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
• Full text of EU DoC is available at https://community.musictribe.com/
• EU Representative: Music Tribe Brands DK A/S
• Address: Gammel Strand 44, DK-1202 København K, Denmark
• UK Representative: Music Tribe Brands UK Ltd.
  Address: 8th Floor, 20 Farringdon Street London EC4A 4AB, United KingdomCorre

ct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.

References

• Music Tribe
• Music Tribe
• Music Tribe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>