JASION EB5 Roamer ST Electric Bike User Manual

JASION EB5 Roamer ST Electric Bike

EBS ROAMER ST ELECTRIC BIKE
COPYRIGHT © 2024 JASION.ALL RIGHTS RESERVED.
The manufacturer reserves the right to make changes to the product and manual at any time Visit www.jasionbike.com to download the latest user manuals

Congratulations on your purchase!

• This user manual will help you assemble and operate your new elec­tric bike. Be sure to read all the information in this manual before riding.
• NOTE TO ALL RIDERS UNDER 18 YEARS OF ACE:
• It’s very important that you get parental permission before riding your electric bike.

Product Safety Notice

• Don’t Ride Until You Read This:

Warning Message

1. Avoid water – The electric bike is not waterproof. The electronics may be damaged due to water and water damage is not covered by our warranty. Riding in wet conditions is also very dangerous and may result in injury.
2. Avoid prolonged exposure to sun or rain and avoid storage in places with high tempera­tures or corrosive gas.
3. Abuse – We do not cover physical damage due to negligent care and extreme riding.
4. Whenever you ride the Jasion Electric Bike. you risk severe injury or even death from loss of control. collisions. and falls. Use caution and ride at your own risk.
5. Do not modify the product from manufacturer’s original design.
6. Do not exceed the posted speed limit and obey all traffic laws.
7. Avoid touching the charging port directly and do not let it make contact with a metal object.
8. Keep hands and all body parts away from moving parts while operating the electric bike.
9. Before riding – be sure to check the electric bike over and make sure the electric bike is operating correctly before each use.
10. Before riding – be sure to check that the braking system is functioning properly; also be sure to check that all safety labels are in place and you understand the safety warnings.
11. Before riding – be sure that any and all axle guards, chain guards, or other covers or guards supplied by the manufacturer are in place and in serviceable condition.
12. Before riding – be sure to check that the tires are in good condition, inflated properly, and have sufficient tread remaining.
13. Never exceed the 400 lbs (182 kg) maximum load rating.
14. The electric bike should never be used by children under the age of 18.
15. Maximum Speed – Your electric bike goes at a maximum speed of 28 mph.
16. Make note that additional insurance may be required to cover situations you encounter while riding an electric bike. It is recommended that you contact an insurance company or broker for advice and consultation.
17. To conserve electricity, use assist mode, and avoid zero starting. frequent braking. driving against the wind, carrying heavy loads including other people and riding with insufficient air pressure.

Package Contents

• Carefully check package contents, if anything is missing or damaged. please contact Jasion customer service for support: support@jasionbike.com
• Unpack the bike. Open the bike box and remove the small box inside. With the help of another person capable of safely lifting a heavy object, remove the bike from the bike box. Carefully remove the packaging material protecting the bike frame and components. Please recycle packaging materials espe­cially cardboard and foam whenever possible. Open the small box and care­fully set out all contents.

Product Overview

Assembly

• Step 1 – Front Fork
  • If you do not feel comfortable assembling the bike yourself. we recommend taking your new bike to a bike shop for assembly and inspection. If you are willing to assemble the bike yourself. be sure to follow all instructions. properly adjust gears and brakes. and set tire pressure.

1. Locate the quick-release lever. Open the lever and remove the thumb nut. safety hook. cone spring (opposite the lever). Keeping the washer and other safety hook and cone spring in place on the lever side.
2.  Line up the fork with the axle at the center of the wheel. Make sure there’s a spacer between the fork and wheel on each side. Install safety hook. gasket. and nut in turn. 
3. Tighten the nut onto the fork with No.15 wrench.
4. Install the front fork cover.

Note : When properly installed, the front wheel should be fully seated and centered in the dropouts of the front fork, The brake rotor should be in between the brake pads in the brake caliper, and the front fork nut should be fully and properly secured. Ensure the front wheel is properly secured before moving on to the next step.

Step 2 – Front Fender & Headlight

1. Take out the fender, remove the nut, washer and bolt at the top of the front fork.

2. Take out the headlights and screws (including lx Bolt, lx Washer, and lx Nut) Slide the fender through the fork. Reattach the bolt, washers. fender, head­light, and nut (in that order) with 8mm wrench.
   

3. Remove the nut, washer, and bolt at the bottom of the front fork slide the fender through the fork. Reattach the lower fender screws.

4. Plug in the headlight. Locate the two sides of the orange, three-pin headlight connector, carefully align the internal pins and notches and external arrows, then press directly together without twisting to fully seat the connection.

Step 3 – Stem

1. Loosen the screws to remove the front fork sleeve.
2. Take out the stem and insert it into the front frame.
3. 3 Tighten the screws to fix the stem in place. 
4. After making sure the stem is align with the direction of the tire, Tight­en the clamping screws below the stem to fix the direction.
5. Tighten the screws to fix the handlebar in place.
6. Cover the stem screw with Steam screw plugs for protection.

Step 4 – Kickstand

1. Take out the kickstand and loosen the two screws on top.
2. Make sure the kickstand is align with the two holes in the frame.
3. Tighten the screws to fix the kickstand in place.

Step 5 – Rear Rack & Taillight

1. Loosen the four screws in the seat stay.
2. Align the rear rack with the seat stay and tighten the screws.
3. Take off the nuts on the taillight.
4. Assembly the taillight into the rear rack. Screwing the nuts.
5. Use wrench to tighten the nuts.
6. For ride safe, secure the taillight cable to the seat stay with nylon cable ties.

Step 6 -Seat

• For better pedaling, safety and overall riding comfort, positioning the seat at the right height is important. The rider’s leg length is used to determine the seat’s position. When you pedal, your hips should remain level and your legs should be almost fully extended at the bottom of the pedal stroke, but not over-extended.
• To determine the right seat height, sit on the eBike with one pedal at its lowest point and place the ball of your foot on the pedal. Your leg should be almost fully extended(not locked out) with a slight bend at the knee.

1. Open the quick-release lever by swing­ing the lever open and outward fully.
2. Move the seat up and down by sliding the seatpost in or out of the seat tube. DO NOT raise the seatpost beyond the minimum insertion marking etched into the seatpost tube.
3. Adujst the seat and the head of the seat is parallel with the top tube.
4. Close the quick-release lever using your palm or finger.

Step 7 – Pedals

1. Locate the right-side/ left side pedal, which is marked “R,” “L,” should have an “R””L,” sticker attached.
2. Thread the right pedal onto the right crank gently by hand, turning clockwise. Then tighten pedal by alien wrench.
3. Thread the left pedal onto the left crank gently by hand, turning counter-clock­wise. Then tighten pedal by alien wrench.
4. Check the chain alignment. Rotate the right pedal and crank toward the back of the bike as though pedaling backward. Watch the chain and ensure the chain runs through the drivetrain (the rear cog, chain tensioner, and around the front chain ring) smoothly.

Note: If the pedal/ chain doesn’t run smoothly or something seems misaligned. please contact Jasion Support at support@jasionbike.com.

Start-up Procedure

After the bike has been properly assembled according to the assembly video, all components are secured correctly, a certified, reputable mechanic has checked the assembly, and you have read this entire manual, turn on the bike and select a pedal assist level following the steps below:

1. Familiarize yourself with the battery power positions. Turn on the battery first and cover the rubber case, ready for a ride.
2. Turn on the bike. With the battery locked in place. Locate the LCD display controls near the left handlebar grip). Hold down for approximately 3 seconds until power is delivered to the LCD display and turn on.
3. Turn on the front light or taillight if needed or desired. Long press button (3 seconds). the brightness of the backlight of LCD Display will decrease. Long press button again (3 seconds). the backlight of LCD Display returns to it’s original brightness.
4. Select the desired level of pedal assistance (PAS) between level 1-3 using the on the LCD display. Level 1 corresponds to the lowest level of pedal assistance. and level 3 corresponds to the highest level of pedal assistance. Level O indicates pedal assistance is inactive. Start in PAS level O or 1 and adjust from there.
5. Begin riding carefully. With the proper safety gear and rider knowledge, you may now operate your bike. On a flat surface, in a low gear (1 or 2). most riders should be able to begin pedaling the bike with pedal assist level O or 1. You may also use the throttle to accelerate and main­tain your desired speed.
6. The throttle is used by slowly and carefully rotating the throttle backward toward the rider. Do not use the throttle unless you are on the bike.

Do not use the throttle while dismounted. Avoid accidental application of the throttle while dismounted: anytime you are moving the bike while dismounted, ensure the bike is powered off to prevent accidental application of the throttle.

 Remove the Battery

1. Put the key into the lock. turn it to the left which is the direction for unlocking.
2. When the battery is unlocked, it will pop down.
3. Prop up the battery with your left hand and then remove the battery with both hands.

When installing the battery, please slowly align the battery tube and place it into the battery tube. Then, gently press with your fingers to lock the battery. Ensure that the battery is securely attached to the bike mount.

Charge Your E-Bike

Before using the electric bike, you must fully charge the battery.

1. Ensure the battery is off, by rotating the key to align with the off icon.
2. Remove the rubber cover on the charging port on the opposite side of the battery from the key switch.
3. Plug the charger into the battery’s charging port. With the battery on or off the bike, place the charger in a flat, secure place, and connect the DC output plug from the charger to the charging port on the side of the battery.
4. Plug the charger into a power outlet, charging should initiate and will be indicated by the LED charge status lights on the charger turning red. Once fully charged, the charging indicator light turning  green. Unplug the charger from the wall outlet first and then remove the charger output plug from the battery charging port.

 Charge Your E-Bike

• The battery can be charged off the bike. To remove the battery, turn the key to the left position (see the previous remove battery section for details).
• Remove the rubber cover on the charging port on the opposite side of the battery from the key switch. Connect the DC output plug from the charger to the charging port on the side of the battery.
• Plug the charger into a power outlet, charging should initiate and will be indicated by the LED charge status lights on the charger turning red. Once fully charged, the charging indicator light turning green. Unplug the charger from the wall outlet first and then remove the charger output plug from the battery charging port.

Display and Setting

• SPEED MODE: Average speed (AVG SPEED). maximum speed (MAX SPEED). real-time speed (RT SPEED).
• SPEED UNIT: Km/h and MPH.
• POWER LEVEL: This icon indicates how much battery life you have left.
• ERROR: will be displayed when a fault is detected.
• DISPLAY BACKLICHT:  will be displayed when the backlight funtion is turned on.
• PEDAL ASSIST LEVEL: 0-3, Display the current power assessed mode.
• RIDINC INFORMATION: TRIP (a single trip), ODO (odometer data), TIME (riding time), POW (power).

LCD Display Controls

LCD Display Operations

Setting Mode: When the bike is on, press and hold buttons at the same time to enter the setting mode.

1. In the setting interface, you can short press to add or subtract the setting value. the parameter will blink after modification, after selecting the set value,
   • Long press to save the current value.
   • Short press to switch to the next parameter and save the set value of the previous parameter at the same time.

Note : Please do not change the setting values of P09-P20, contact Jasion at support@jasionbike.com if you have any questions.

Daily Care and Maintenance

Cleaning and Storage
if you see stains on the bike body, wipe them off with a damp cloth. If the stains won’t scrub off. button some toothpaste. and brush them with a tooth brush. then wipe them off with a damp cloth.
Notes: do not clean the bike with alcohol, gasoline, kerosene or other corrosive and volatile chemicals solvents to prevent dire damage. Do not wash the bike with a high-pressure water spray. During cleaning, make sure that the bike turned off, the charging cable is unplugged, and the rubber flap is closed as water leakage may result in electric shock or other major problems. When the bike not infuse, keep it indoors where it is dry and cool. Do not put it outdoors for along time. Excessive sunlight. overheating and over cooling accelerate the battery pack’s life span.
Battery Maintenance

1. Use original battery packs. use of other models or brands may bring about safety issues:
2. Do not touch the contacts. Do not dismantle or puncture the casing. Keep the contacts away from metal objects to prevent short circuit which may result in battery damage or even injuries and deaths;
3. Use original power adapter to avoid potential damage or fire;
4. Mishandling of used batteries may do tremendous harm to the environment. To protect nature environment, please follow local regulations to properly dispose used batteries;
5. After every use, fully charge the battery to prolong its life span.

Storage and Disposal

1. Please try to store the bike in a cool and dry place between 50 – 77 (10 C- 25 C) In extreme! humid environments the interior of the bike may suffer condensation or even water accumu­lation. which may damage the battery rapidly. Devices are not intended for use at elevations greater than 2000m above sea level prolonged exposure to UV rays, rain and the elements may damage the enclosure materials. store indoors when no tin use.
2. In daily use, try to avoid recharging the bike after completely exhausting the battery. If the battery is low. charge it as soon as possible.
3. Please charge the bike every other month to preserve the battery.

Recommended Service Intervals

Regular inspection and maintenance are key to ensure bikes from jasion function as intended. and to reduce wear and tear on their systems. Recommended service intervals are meant to be used as guidelines. Real world wear and tear. and the need for service, will vary with condi­tions of use. We generally recommend inspections. service, and necessary replacements be performed at the time or mileage interval that comes first in the following table.

Your cables, spokes, and chain will stretch after an initial break-in period of 50-100 mi (80-160 km). and bolted connections can loosen. Always have a certified, reputable bike mechanic perform a tune-up on your bike after your initial break-in period of 50-100 mi (80-160 km) (depending on riding condi­tions such as total weight, riding characteristics, and terrain). Regular inspec­tions and tune-ups are particularly important for ensuring that your bike remains safe and fun to ride.

Tire Inflation and Replacement

• The EB5 Romer ST employs 26″x2.25″rubber tires with inner tubes. The tires are designed for durability and safety for regular cycling activities and need to be checked before each use for proper inflation and condition, Proper inflation, care, and timely replacement will help ensure that your bike’s operational characteristics will be maintained, and unsafe conditions avoided.

• Jasion recommends 45-60 PSI for the stock tires on the Jasion. Always stay within the manufac­turer’s recommended air pressure range as listed on the tire sidewall.

• It is critically important that proper air pressure is always maintained in pneumatic tires. Do not underinflate or overinflate your tires. Low pressure may result in loss of control, and overinflated tires may burst, Failure to always maintain the air pressure rating indicated on pneumatic tires may result in tire and/or wheel failure.
  Inflate your tires from a regulated air source with an available pressure gauge. Inflating your tires from an unregulated air source could overinflate them, resulting in a burst tire.

• Even tires equipped with built-in, flat-preventative tire liners. like those that come with bikes from jasion, can and do get flats from punctures, pinches, impact, and other causes. When tire wear becomes evident or a flat tire is discovered, tires and/or tubes must be replaced before operating the bike or injury to operators and/or damage to your bike from Jasion could occur.

• When changing a tire or tube, ensure that all air pressure has been removed from the inner tube prior to removing the tire from the rim. Failure to remove all air pressure from the inner tube could result in serious injury.
  Using aftermarket tires or inner tubes, not provided by jasion may void your warran­ty, create an unsafe riding condition, or damage to your bike. If required by law, ensure replacement aftermarket tires have sufficient reflective sidewall striping.

• For more information on tire or tube replacement procedures, or questions about tire inflation, visitjasionbike.com/pages/help-center or contact Jasion Product Support.

• Email: support@jasionbike.com

• Phone: (+1) 888-825-636

 Troubleshooting

| Symptoms| Possible Causes| Most Common Solutions
---|---|---|---
| The bike does not work|

1. **** Insufficient battery power
2. Faulty connections
3. Battery not fully seated in tray
4. Improper turn on sequence
5. Brakes are applied
6. Blown discharge fuse

|

1. **** Charge the battery
2. Clean and repair connectors
3. Insta11 battery correctly
4. Turn on bike with proper sequence
5. Disengage brakes
6. Replace discharge fuse

2| Irregular acceleration and/or reduced top speed|

1. Insufficient battery power
2. Loose or damaged throttle
3. Misaligned or damaged magnet ring

|

1. Charge or replace battery
2. Replace throttle
3. Align or replace magnet ring

**** 3| The motor does not respond when the bike is powered on|

1. Loose wiring
2. Loose or damaged throttle
3. Loose or damaged motor plug
4. wire
5. Damaged motor

|

1. Repair and or reconnect
2. Tighten or replace
3. Secure or replace
4. Repair or replace

4| Reduced range|

1. Low ti re pressure
2. Low or faulty battery
3. Driving with too many hills. headwind. braking, and/or excessive load
4. Battery discharged for long period of time without regular charges, aged, damaged, or unbalanced
5. Brakes rubbing

|

1. Adjust tire pressure
2. Check connections or charge battery
3. Assist with pedals or adjust route
4. Balance the battery: contact tech support if range decline persists
5. Adjust the brakes

5| The battery will not charge| ****

1. Charger not well connected
2. Charger damaged
3. Battery damaged
4. Wiring damaged
5. Blown charge fuse

|

1. **** Adjust the connections
2. Replace
3. Replace
4. Repair or replace
5. Replace charge fuse

6| Wheel or motor makes strange noises|

1. Loose or damaged wheel spokes or rim
2. Loose or damaged motor wiring

|

1. **** Tighten, repair, or replace
2. Reconnect or replace motor.

Specifications

FAQS

• Ql: What if the e-bike arrived missing an accessory or a broken part?
  A 1: Please take a photo and send to Jasion Support Team by sending email: support@jasionbike.com and Jasion Support Team will reply you soon and send correct accessory or part replacement.

• Q2: Will my bike arrive assembled?
  A2: Your bike will arrive mostly assembled. We’ II also provide the tools and a comprehensive assembly video for the rest part.

• Q3: What can I do if something goes wrong with my e-bike during the warranty?
  A3: We believe that communication is the best way to solve the problem. Please contact us in time. To help vow solve the problem as quickly as possible. please describe the problem in detail and provide photos/videos with your order ID.

Error Code

Limited Warranty

• 14 DAYS SATISFACTION GUARANTEED RETURN POLICY
• If you are unsatisfied with your purchase, Jasion’s return policy allows you to return the product purchased on the authorization Channel within 14 days counting from the date of receipt of shipment. and request are fund from the authorization Channel.
• Note: Express shipping cost is non-refundable.
• To be eligible for a return, your item must be in the same condition that you received it.unworn, unused, and the bike must have less than ten (1 OJ miles on the odometer, be free of any wear and tear. dirt. dust. fragrance. or any other signs of use and must include all items that were inside the box (charger, keys, hardware, etc.).
• Over 14 days: Return is not acceptable; Accept exchange new product or partial refund.
• We will deduct the shipping fee or restocking $180/pc when we are making a refund for non-defective products and non-longer needed products.
• For the return request, Jasion is not responsible for lost packages due to the carrier, or products received that can not be verified.
• Received products that have damage determined to have been caused by the end-user maybe subject to denial of the return request.

TO QUALIFY FOR A REFUND, ALL THE FOLLOWING CONDITIONS MUST BE MET:

1.  A Return Merchandise Authorization(RMA) must be requested from Jasion within 14 days from the date of receipt of shipment, To request an RMA. contact Jasion Service Team at support@jasionbike.com
2. The cost of return shipping will be paid by the customer.
3.  For warranty service, please keep your receipt and/or invoice to validate proof of purchase.
4. Returned product must be in good physical condition(not physically broken or damaged).
5. All accessories originally included with your purchase must be included with your return.
6.  If you return a product to Jasion, (a) without an RMA from Jasion(b) without all parts included in the original package, Jasion retains the right to refuse delivery of such return.

LIMITED PRODUCT WARRANTY

Jasion warrants the original purchaser that your Jasion product shall be free from defects in materials and workmanship under normal use for a period aforementioned. Jasion does not warrant the operation of the product will be uninterrupted or error-free

• Only the original owner of an ebike purchased from Jasion online or physical storefront is covered by this Limited Warranty. The Warranty Period begins upon your receipt of the ebike and shall end immediately upon the earlier of the end of the Warranty Period or any sale or transfer of the ebike to another person. and under no circumstances shall the Limited Warran­ty apply to any subsequent owner or other transferee of the ebike.
• The Limited Warranty is expressly limited to the replacement of a defective lithium ion battery (the “Battery”), frame. forks. stem. handlebar. headset. seat post. saddle. brakes. lights. bottom bracket. crank set. pedals. rims. wheel hub. freewheel, cassette. derailleur. shifter. motor. throt­tle, controller, wiring harness, LCD display, kickstand, reflectors and hardware(each a “Covered Component”).
• The Covered Components are warranted to be free of defects in materials and/or workman­ship during the Warranty Period.

Limited Warranty Does Not Cover:

• Normal wear and tear of any Covered Component.
• Consumables or normal wear and tear parts (including without limitation tires. tubes. brake pads. cables and housing. grips. chain and spokes).
• Any damage or defects to Covered Components resulting from failure to follow instructions in the ebike owner’s manual. acts of God. accident. misuse. neglect. abuse. commercial use. alterations. modification. improper assembly, installation of parts or accessories not originally intended or compatible with the ebike as sold, operator error. water damage, extreme riding, stunt riding, or improper follow-up maintenance.
• For the avoidance of doubt. Jasion will not be liable and/or responsible for any damage .failure or loss caused by any unauthorized service or use of unauthorized parts.
• The Battery is not warranted from damage resulting from power surges. use of an improper charger. improper maintenance or other such misuse. normal wear or water damage.
• Any products sold by Jasion that is not an ebike.

Contact Us
Contact us if you experience issues relating to riding. maintenance and safety, or errors/faults with your JASION

Scan the QR code and join our Facebook Group.
Share your riding experience with other rides and get an exclusive bonus!

JASION LTD

• www.jasionbike.com
• @ jasionbike_official @
• @Jasion Ebikes
• support@jasionbike.com
• @ jasionbikes
• @ jasionbike_official

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>