IKEA JETSTROM 100×40 cm LED Ceiling Light Panel Instruction Manual
- July 8, 2024
- Ikea
Table of Contents
IKEA JETSTROM 100×40 cm LED Ceiling Light Panel
Specifications
- Wireless connectivity range: Up to 10 meters
- Color temperature options: 2200K (warm glow), 2700K (warm white), 4000K (cool white)
- Maximum pairing capacity: Up to 10 light sources with 1 steering device
Getting started
- Connect your product to the mains or plug the power cable into the wall socket.
- Before you can use your light source you’ll need to pair it with a steering device.
- Make sure that your light source is installed and the main power switch is turned on.
- Hold the steering device close to the light source you want to add (no more than 5 cm away).
- Press and hold the pairing button for at least 10 seconds. A red light will shine steadily on the steering device. Your light source will begin to dim and finally flash one time to indicate that it has been successfully paired.
Up to 10 light sources can be paired with 1 steering device. Make sure to pair
them one at a time. If the light sources are close to each other, disconnect
those that have already been paired from the main power switch.
The colour temperature can be switched between 2200K (warm glow), 2700K (warm
white) and 4000K (cool white).
If you have the TRÅDFRI gateway or DIRIGERA hub
Go to App Store or Google Play and download the IKEA Home smart app. The app
will take you through the process of installing your product and other
devices.
CAUTION:
DO NOT USE WITH STANDARD DIMMERS. This light source will not operate properly
when connected to a standard (incandescent) dimmer or dimming control. Only
controllable by IKEA Smart lighting pr oducts.
How to factory reset your product
If the product does not respond or if you want to un-pair the product from a
steering device you might have to make a factory reset. The product is forced
to factory reset by carefully inserting a paper clip end or similar in the
small hole (marked RESET) and apply a slight pressure.
IMPORTANT
- For indoor use only.
- Do not leave the product in direct sunlight or near any heat source, as it may overheat.
- The declared radio range between the unit and the steering device is measured in open air.
- Different building materials and placement of the units can affect the wireless connectivity range.
Care Instructions
Wipe clean with a damp cloth. Never use abrasive cleaners or chemical solvents
as this can damage the product.
Save these instructions for future use.
Technical data
- Type : L2208 JETSTRÖM
- Input: 220-240 VAC, 50-60 Hz, 42 W
- Max lumen output: 5100 lm
- Radio range : 10 m in open air.
- Operating frequency: 2405-2480 MHz
- Output power (EIRP): max 9 dBm
- Manufacturer: IKEA of Sweden AB
- (commercial registration number: 556074-7551)
- Address: Box 702, SE-343 81 Älmhult, SWEDEN
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling by local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or landfills and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.
© Inter IKEA Systems B.V. 2023
FAQ
- Can I use this product with standard dimmers?
- No, this light source is only compatible with IKEA Smart lighting products and should not be used with standard dimmers.
- How many light sources can be paired with one steering device?
- You can pair up to 10 light sources with a single steering device, ensuring they are added one at a time within proximity.
- How do I dispose of the product?
- The item should be disposed of separately from household waste and handed in for recycling following local environmental regulations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>