IKEA TRADFRI Starter Kit and Smart Wireless Dimmable Instruction Manual
- July 8, 2024
- Ikea
Table of Contents
IKEA TRADFRI Starter Kit and Smart Wireless Dimmable
Product Specifications
- Model: LED2201G8
- Maximum Distance for Control: 5 cm (2 inches)
- Sync Capability: Up to 10 lights on one control device
- Manufacturer: IKEA of Sweden AB
Product Usage Instructions
Resetting Device Settings
To reset the device settings, turn the switch on and off 6 times.
Adding Lights to Control Device
- Ensure the light is installed and the main power switch is on.
- Place the control device near the light you want to add (within 5 cm).
- Press and hold the sync button for at least 10 seconds. The light will turn red on the control device. Your light will start blinking, indicating successful synchronization. Up to 10 lights can be synced on one control device.
Adjusting Light Intensity
Do not use standard intensity regulators with the light. To adjust the
brightness, only use the designated control device. Different color tones are
available: 2200 K (warm dim), 2700 K (warm white), and 4000 K (cool white).
Resetting Light Device
To reset the light device, turn it on and off 6 times.
POWER
BATTERY
© Inter IKEA Systems B.V. 2024
Frequently Asked Questions
- Q: Can I use standard intensity regulators with this light?
- A: No, only use the provided control device to adjust brightness as standard intensity regulators may not function correctly with this light.
- Q: How many lights can be synchronized with one control device?
- A: Up to 10 lights can be synchronized on one control device.
- Q: How do I know if the synchronization was successful?
- A: The light will start blinking after successful synchronization, indicating that it has been synced with the control device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>