IKEA BADRING Water Sensor Instructions
- July 8, 2024
- Ikea
Table of Contents
IKEA BADRING Water Sensor
Specifications
- Product Name: BADRING Water Sensor
- Usage: Detects water presence and sounds an alarm
- Compatibility: Works with DIRIGERA hub and IKEA Home smart app
- Power Source: AAA/HR03 battery (1.2V, 750mAh, Ni-MH)
- Usage Environment: Indoor, damp locations like bathrooms, laundry rooms, basements
Product Usage Instructions
- Get Started:
- With DIRIGERA hub:
- Open the back of the sensor and insert an AAA/HR03 battery.
- Download the IKEA Home smart app and follow the on-screen instructions.
- Close the battery compartment and place the sensor where water presence needs to be monitored.
- Without DIRIGERA hub:
- Open the back of the sensor and insert an AAA/HR03 battery.
- Close the battery compartment and place the sensor where water presence needs to be monitored.
- The sensor is ready for use immediately.
- Testing the Alarm:
- We recommend testing the alarm by placing the sensor in a bowl with 1-2mm of water. Ensure only the metal prongs are submerged. The alarm will stop when the prongs dry out.
- Adding More Sensors:
- You can connect multiple sensors to the DIRIGERA hub and IKEA Home smart app. Follow the app instructions to add a new sensor.
- Battery Care:
- When the red LED indicator lights up three times, replace the AAA/HR03 battery. Use 1 x IKEA LADDA 750 (sold separately).
- Care Instructions:
- To clean, wipe with a soft cloth dampened with mild detergent. Dry with another soft cloth. Avoid abrasive cleaners or chemical solvents.
- Safety Instructions:
- This product is for indoor use only. Follow battery safety guidelines. Dispose of used batteries properly. Read and save the safety instructions for future reference.
FAQs
- Q: Can I use this product outdoors?
- A: No, this product is for indoor use only.
- Q: How do I know when to replace the battery?
- A: The red LED indicator will light up three times, and you will receive a notification in the IKEA Home smart app.
Get started
BADRING water sensor detects the presence of water in indoor environments and sounds an alarm. It can be used with the DIRIGERA hub and IKEA Home smart app to notify you of a water leak, even if you are away from home.
Get started with DIRIGERA hub
- Open the back of the sensor and insert an AAA/HR03 battery.
- Download the IKEA Home smart app and follow the instructions on your screen.
- Close the battery compartment and place the sensor wherever you want to monitor the presence of water.
Get started without DIRIGERA hub
- Open the back of the sensor and insert an AAA/HR03 battery.
- Close the battery compartment and place the sensor wherever you want to monitor the presence of water.
- The sensor is ready to use straight away.
IKEA Home smart app
- For Apple devices, download the app using the
- App Store. For Android devices, download the app using the Google Play store.
Get to know your product
- You can use the sensor in damp locations, like bathrooms, laundry rooms, or basements.
- The sensor has two metal prongs underneath and will sound an alarm when both prongs come into contact with water.
- The sensor has silicon feet to prevent it from moving around so there is no need to use double-sided tape or any other adhesive that may obstruct the flow of water.
Testing the alarm
- We recommend testing the alarm to familiarize yourself with the way it sounds.
- Place the sensor with metal prongs facing down in a bowl filled with 1-2 mm of water.
- Note! The sensor’s casing is not waterproof, make sure only metal prongs are submerged.
- The alarm will stop when the metal prongs underneath the sensor dry out.
- The alarm will stop when the prongs underneath the sensor dry out.
Adding more sensors
- You can connect as many sensors as you like to the
- DIRIGERA hub and IKEA Home smart app.
- To add a new sensor follow the instructions in the IKEA
- Home smart app.
Battery care
- When it’s time to replace the battery, a red LED indicator will light up three times on the sensor, and in the IKEA Home smart app you will be notified when the battery is low.
Changing the battery
- Open the back of the sensor, insert a new AAA/HR03 battery, and close it again.
- Please note the safety information in this document concerning battery usage and disposal.
- We recommend using 1 x IKEA LADDA 750
- (AAA/HR03, 1.2V, 750mAh, Ni-MH). Sold separately.
Factory reset
- Press the pairing button 4 times within 5 seconds.
Care instructions
- To clean the product, wipe with a soft cloth moistened with a little mild detergent. Use another soft dry cloth to wipe it dry.
- Never use abrasive cleaners or chemical solvents since this can damage the product.
Safety instructions
- Please read this section carefully before using the product.
- It contains important information and should be saved for future reference.
General safety
- This product is for indoor use only and can be used in temperatures ranging from 0℃ to 40℃ (32°F to 104°F).
- Do not leave the product in direct sunlight or near a heat source as it may overheat.
- Different building materials and product locations can affect the wireless connectivity range.
WARNING!
- Risk of explosion if the battery is replaced by an incorrect battery type. Dispose of used batteries according to the instructions.
Technical data
- Model: BADRING water leakage sensor
- Type: E2202
- Input: 1.2V, 1 x AAA/HR03 LADDA battery
- Range: 10 m in open air. For indoor use only
- Operating frequency: 2405-2480 MHz
- Output power: 7.3 dBm (EIRP)
- IP-class: IP44 Keep this manual for future use.
- Manufacturer: IKEA of Sweden AB
- Address: Box 702, SE-343 81 Älmhult, SWEDEN
This device complies with Part 15 of the FCC Rules/ Innovation Science and Economic Development Canada’s license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation of the device.
WARNING:
- Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- This equipment complies with the ICES RF radiation exposure limits set forth for an uncontrolled environment.
- This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of the human body.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling per local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or landfills and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>