PECUWE Y2000 Portable Jump Starter User Manual

PECUWE Y2000 Portable Jump Starter

Warning! Please read carefully before use and follow the correct steps. Failure to follow the instructions may result in electrical shock, explosion, or fire, which may result in serious injury, death  ,  damage to the device, or property.

WHATS IN THE PACKAGE

CHARGING TIMES

Charging Times
The time will vary depending on the discharge level and the power supply used. Below are just examples with approx charging time. Actual results may vary depending on battery conditions and input voltage and current.

40Min
59.2WH| 3 . 5 hr| 3.5h r| 1.7h r| 1hr| Arou n d 36 M in

TECHNICAL SPECIFICATIONS

| Y2000
---|---
**Air compressor| ** 150PSl,22UMin
Built  in battery| Lithium 4S
Power| 88WH
Working temperature| -20°C to +60°C
PD (Input)| MAX 80 W (5V/3A 9V/3A 12V/3A 15V/3A20V/5A)
PD (Output)| MAX 80 W (5V/3A 9V/3A 12V/3A 15V/3A20V/5A)
USB1 (Output)| MAX18W (5V3A, 9V2A,12V1.5A)
USB2(Output)| 5V/2.4A
Dimensions (Lx W xH)| 240mm·138mm·somm
Suitable Engine| 12V

KNOW YOUR JUMP STARTER

Function Introduction

1. Jump Starter
   Experience peace of mind with the built-in jump starter function.
   Whether you find yourself with a dead battery or in need of assistance

2. Type-C Input and Output
   PD 80W input and output capabilities, allowing you to charge your devices quickly and efficiently. And it supports 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A.

3. USB Interface
   Two USB-A output interfaces: Max 18W, supporting 5V/3A, 9V/2A, 12V/1.5A (QC3.0, QC2.0) output.

4. LED Torch
   Illuminate your surroundings with the built-in 600 lumen LED torch feature, providing you with a reliable source of light during emergencies or night-time situations.

5. Power Bank
   Stay connected on the go with the power bank functionality, allowing, you to charge your smartphones, tablets, and other electronic devices, ensuring you never run out of batter ower.

6. Air compressor
   When you have flat tyre, you can inflate your vehicle’s tires with ease, ensuring optimal tire pressure for a safe and comfortable ride.
   It is with preset pressure for car, bike and ball which allow you to pump the tyre easily

HOW TO JUMP START

Connect the clamp cable to jump starter:
Notes: Ensure clamp is securely and tightly inserted to provide a solid connection.(LED clamp)has green”ready” flashing and (Regular clamp) has green and red light alternate flashing, you are safe to move to next step.

Connect the jump starter to the car battery:
Connect Red{+) Clamp to positive(+) B:Connect Black Clamp to Negative(-) of the car battery
Notes: Do not make any connections to carburetors, fuel lines or sheet metal parts . (LED clamp )has green”ready” steady and{Regular clamp) has green light steady, you are safe to move to next step.

Start the vehicle:
Start the engine within 30 seconds.
Notes: If over 30s, the clamp will get into protection status and stop output. Please restart from Step 1. If the vehicle does not start immediately, wait 20-30 seconds and try it again from step 1. Do not attempt more than five (5) consecutive jumps in 15 minutes.

Disconnect clamp and remove Jump starter:
Notes:
When disconnecting, disconnect in reverse order and remove the negative pole first (for positive grounding system, remove the positive pole first)Force Button Function(Optional)

Caution: Use the Force Button Function only when the car battery is extremely low or unable to start the vehicle . Ensure the clamp is correctly connected to the battery terminal before pressing the button. Then press the force button consecutively for 3times, then you need to start the car within 30 seconds.

HOW TO BUMP

Connect the jump starter and car tire:
Notes: Ensure clamp is securely and tightly inserted to provide a solid connection.

Choose the tyre pressure:
Notes: You can press +/- to change the value of presure, short press M button to change unit, and long press M to change application. The preset presures are as below:

• Car nre: 2.5kg/cm3 2.5BAR 36PSI 250KPA
• Bicycles: 1.8kg/cm3 1.8BAR 26PSI  180KPA
• Ball: 0.55kg/cm3 0.55BAR 8PSI 180KPA

Long press the power button:
Notes: The air compressor will work and stop automatically at the preset pressure.

Disconnect & Storage:
Notes: Disconnect the jump starter, and keep all accessories well

SMART CLAMPS TROUBLESHOOTING

Please choose read the troubleshooting based on the smart clamp you have.

Troubleshooting of LED Smart with voice prompt

Check and Connect the dampsoorrectly
| Reverse connection recognition| The Clamp has reverse connection with car battery| **** Check and Connect the damps correctly

| Continuous start recognition| 4 Times consecutive start or more| Disconnect and reconnect
again, For safey concern,
better to wait for 1-2min,
then reconnect
| Low voltage recognition| The battery is low| Recharge the jump starter
Ready| Indicator light| Well connected and ready took| Recharge the jump starter
Smart Clamp With Voice Prompt*1

Troobleshooting of Indicator Smart Clamp

and make sure the terminal Positive to positive, negative to negative.
| Green Light| Ready status. you are safe to start the vehicle.| Start the vehicle within 30s.
| The shifting of the indicator
light from green to red| The clamp stops working
if the vehicle is not started
within 30 seconds after
connecting the car battery.| Disconnect the clamp from the
car battery and jumpstarter,
and try it again after at least
30s.
| The simultaneous lighting of the red and green lights| Consecutive ump too many times in a short time caused over-current limit protection.| Disconnect the damp from the

car battery and jumpstarter, and by again after at least 1

minute.

Indicator Smart Clamp*1

FREQUENTLY ASKED QUESTIONS

How long does it take to fully charge the booster?

The charging time will vary depending on different status. such as the discharge level.the battery capacity, the power supply used.the device charge rate supported. Please read the Charging time for reference.

How many times can I use when starting the car?

The times of starting engine can be a range from 3 to 20 based on diffent condition of battery and engine. and the temperature also matters.

How long does a unused booster last power?

Around 3-6months and it is essential to recharge the booster every 3month for keeping better better performance of booster

What car engine can the booster start and What the engine displacement is suitable?
Both petrol and diesel engines are supported.
The higher power can start higher Engine displacment . But it relate to many different factors, induding battery power, different brands. we can only take below data for reference.

| Battery Power
---|---
59.2WH| 66.6WH| 74WH| 88.BWH
Petrol Engine| Up to 6L| Up to 7-8L| Al1 types
Diesel Engine| Up to 4L| Up to 5-6L| Upto 6-9L

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>