thdstatic LED Pendant Light with Fan Instruction Manual
- July 6, 2024
- thdstatic
Table of Contents
thdstatic LED Pendant Light with Fan
Assembly Instruction
Read this manual before installation, and well keep it for reference （Expansion screws are not included, please purchase as per weight of the fixture))
- Cut off the power, make sure the ceiling is able to support the weight of the product, and determine the installation plan before installing.
- Take out the lampbody and accessory kit, pre-assemble the fixture completely.(See Step 1, 3 $ 4)
- Drill mounting holes on the ceiling according to the mounting holes of the hanger bracket, drive in the expansion rubber plug, and fix the hanger bracket to the ceiling with self-tapping screws. Make sure it is firm and reliable.(See Step 1)
- Connect home wires to the terminal, the live wire to L, the neutral wire to N. When wiring, make sure that the wire is in good contact and the copper wire at the end is not exposed. (See Step 1 & 2)
- Double check if connection is correct before use.
Maintenance instructions
- Cut off the power before replacing the light source, to avoid electric shock or impact damage to the light source and electrical appliances.
- Make sure the correct LED model indicated on the light source board is used for installation or replacement,and check the positive and negative polarity when wiring.
- The fixture should be installed by qualified electrician.
- This manual are for reference only,specifications are subject to the physicals product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>