Aoteng 9KEY 433MHz Remote Control Instructions
- July 8, 2024
- Aoteng
Table of Contents
Aoteng 9KEY 433MHz Remote Control
Product Information
Specifications
- Model: [Insert Model Number]
- RF Exposure Requirement: General
- Portable Use: Yes
- Restrictions: None
Product Usage Instructions
-
Safety Precautions
Before using the device, please read all safety instructions provided in the user manual to ensure safe operation. -
Powering On/Off
To power on the device, press and hold the power button for a few seconds. To power off, repeat the same process. -
Usage in Portable Exposure Condition:
The device is approved for use in portable exposure conditions without any restrictions. Ensure you follow local regulations regarding RF exposure. -
Maintenance
Regularly clean the device using a soft, dry cloth to prevent dust buildup. Avoid using harsh chemicals or solvents.
Frequently Asked Questions (FAQ)
-
Q: Can the device be used in areas with high RF exposure?
A: The device is designed to meet general RF exposure requirements and can be used in portable exposure conditions without restrictions. However, it is recommended to follow local regulations and guidelines. -
Q: How do I know if the device is functioning properly?
A: Check for any error messages on the device’s display, ensure proper battery levels, and refer to the user manual for troubleshooting steps.
Remote control instructions
- 1 2 3 Fan speed adjustment button:H, M, Lare high-end, mid-range, low-grade.
- 4 Light Switch Button:Turn Light on and off.
- 5 Fan off button:press the button fan stop working, guide wing also stop working.
- 6 7 8 Press the timing button to start the countdown. When the time is over, both the fan and the lamp stop working.
- 9 Adjust the forward and reverse rotation of the fan.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
RF warning statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>