G-sun Lighting 2BG46-VIROSMARTBULB LED Filament Lamp Instructions
- July 4, 2024
- G-sun Lighting
Table of Contents
G-sun Lighting 2BG46-VIROSMARTBULB LED Filament Lamp
LED
LED filament bubbles have a unique design, 360 ° intensity of illumination
and color temperature changes in temperature, make it suitable for decorative
lighting; The unique dot structure inside gives these bulbs a decorative
effect from the inside out.Wide range of
applications: restaurants, bars, cafes, shopping malls, hotel lobby, home
decoration and festive decoration.
These lamps shall be supplied with an E26 holder.
Describe
LED filament lamp, long service life, beautiful and generous. It has the
advantages of good color display, fast running speed and high reliability.
Function
- With wifi or bluetooth, the connected lamps can be controlled separately, can be grouped and controlled, and can also create a key control.
- Turn on/off the lights regularly.
- dimmable tunable（2700-6500K)
- built-in modes are available: (Goodnight, Reading, Work, and leisure).
- Different places can be set up, each place can control multiple lamps (the number is mainly limited by the louds of the router).
- WiFi connected bulbs, turns on the remote, and the lamp can connect to a third-party voice platform (alexa, google home) to achieve voice control.
- WiFi connected bulbs, lamps can achieve remote control (at home can control the office lamps, Beijing can control the lamps in Shenzhen)
- Restore the network to the initial state by using the following method: ON-OFF-ON-OFF-ON After the indicator blinks quickly, the network is connected. ( Note : Reset the ON-OFF interval should be less than 3 seconds).
Main technical parameters
AC120V，60Hz，IP20
Item| Color| Power| Voltage| Base| CT| Ra| DIM| DIA
(mm)
| MOL
(mm)
---|---|---|---|---|---|---|---|---|---
TUYA-G25
|
透明
|
6W
|
AC 120V
|
Brass E26
|
2200K–4000K
|
90
|
YES
| 80|
120±3
TUYA-ST64
|
透明
|
6W
|
AC 120V
|
Brass E26
|
2200K–4000K
|
90
|
YES
| 64|
140±3
TUYA-T45
|
透明
|
6W
|
AC 120V
|
Brass E26
|
2200K–4000K
|
90
|
YES
| 45|
108±3
TUYA-BT12 0-W
|
透明
|
6W
|
AC 120V
|
Brass E26
|
2200K–4000K
|
90
|
YES
| 120|
435±5
TUYA-S140
-1
|
透明
|
6W
|
AC 120V
|
Brass E26
|
2200K–4000K
|
90
|
YES
| 140|
245±5
TUYA-G25- W
|
内涂白色
|
6W
|
AC 120V
|
Brass E26
|
2200K–4000K
|
80
|
YES
|
80
|
120±3
TUYA-ST64
-W
|
内涂白色
|
6W
|
AC 120V
|
Brass E26
|
2200K–4000K
|
80
|
YES
|
64
| 140±3
TUYA-T45- W
|
内涂白色
|
6W
|
AC 120V
|
Brass E26
|
2200K–4000K
|
80
|
YES
|
45
|
108±3
---|---|---|---|---|---|---|---|---|---
TUYA-G125
|
透明
|
6W
|
AC 120V
|
Brass E26
|
2200K–4000K
|
80
|
YES
|
125
|
175±3
TUYA-G125
|
内涂白色
|
6W
|
AC 120V
|
Brass E26
|
2200K–4000K
|
80
|
YES
|
125
|
175±3
TUYA-G200
|
透明
|
6W
|
AC 120V
| PAR5.2
+Brass E26
|
2200K–4000K
|
80
| YES|
200
|
298±5
TUYA-G200
|
内涂白色
|
6W
|
AC 120V
|
PAR5.2
+Brass E26
|
2200K–4000K
|
80
|
YES
|
200
|
298±5
Matters needing attention
-
When installing and replacing the lamp, please ensure that the power is turned off. Only touch the plastic edges to ensure safety and avoid glass breakage.
-
When the power supply voltage is too high or too low, it will affect the service life.
-
It is not suitable for use in wet conditions.
-
When the light does not work well (it cannot be lit up and frequently flashes), please check whether the power supply and lamp holder are connected with the light.If it still doesn’t work, get a new one.
-
Do not use with standard dimmers. This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control.
Note : do not use the bulb if the lampshade is damaged. -
Please note that the increased weight may reduce the mechanical stability of certain lamps and holders and may affect contact closure and lamp retention.
Waste electrical products should not be disposed of together with normal
household waste. Please recycle where there is a facility. Ask your local
government or retailer for recycling advice.
Company name Hangzhou G-Sun Lighting Co., Ltd.
Address No.3 Longhuang Road Jingshan Industrial Zone Yuhang District,
Hangzhou 311116 P. R. China
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>