Elektric OFFROAD DESIGNS EOD 2017 Plus Can Am X3 Volt Baja Box Instructions
- July 4, 2024
- Elektric OFFROAD DESIGNS
Table of Contents
Elektric OFFROAD DESIGNS EOD 2017 Plus Can Am X3 Volt Baja Box
Specifications
- Model: EOD 2017+ Can Am X3 Volt Baja Box
- Part Number: CBB210001
Product Information
The EOD 2017+ Can Am X3 Volt Baja Box is a high-performance electronic control unit designed specifically for the Can Am X3 model year 2017 and newer. It is engineered to enhance the vehicle’s voltage regulation and provide optimal performance in off-road conditions.
Product Usage Instructions
Installation
- Ensure the vehicle’s power is turned off before installation.
- Locate the stock voltage regulator on your Can Am X3 and disconnect any electrical connections.
- Mount the Volt Baja Box in the designated area using the provided mounting hardware.
- Connect the electrical wires to the corresponding terminals on the Volt Baja Box.
- Double-check all connections and secure the unit in place before powering on the vehicle.
Operation
- Once installed, power on your Can Am X3 as usual.
- The Volt Baja Box will automatically regulate the voltage to ensure consistent performance.
- Monitor the unit for any unusual behavior or indicators of malfunction.
Frequently Asked Questions (FAQ):
-
Q: Is the EOD 2017+ Can Am X3 Volt Baja Box compatible with older Can Am X3 models?
A: No, this specific model is designed for Can Am X3 vehicles from 2017 onwards. Using it with older models may result in compatibility issues. -
Q: Can I install the Volt Baja Box myself, or do I need professional assistance?
A: While installation instructions are provided, it is recommended to have the unit installed by a qualified technician toensure proper connection and functionality.
EOD 2017+ Can Am X3 Volt Baja Box P/N- CBB210001
Remove the 6 torx bolts from the top of the rear fenders as shown then remove the 4 torx bolts shown in the base of the cargo area, the rear bolts will be used later on. The rear bolts can be tricky to get to and a long box wrench makes this task much easier.- Install the Baja box tipping the front down and under the shock reservoirs then lowering the rear portion down onto the cargo base. The rear shock reservoirs are mounted in slightly different spots from one vehicle to another, before setting the Baja box into rear of the vehicle make sure they are going to be clear before installing.
- Shift the box slightly if needed to get the outer bolt holes lined up with the fender holes and loosely install the supplied hardware then the inside hardware. The rear holes will use the factory hardware removed earlier and the holes closest to the front of the vehicle with use the supplied hardware. Once all the hardware is started, tighten down the inside hardware first and then tighten down the outer fender hardware second.
- Next bolt the ball studs for the lift struts to the interior of the box as shown with the upper ones facing to the outside and the lower ball ends facing to the center of the vehicle.
- Once the ball ends are tightened down the lift struts will be installed with the body of the struts up and the rods coming out of the bottom, see attached picture if needed. Perform a final check over of all the work completed and enjoy another great product from Elektric Offroad Designs!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>