Brilliant CERES Pendant Light Instruction Manual
- July 3, 2024
- brilliant
Table of Contents
Brilliant CERES Pendant Light
Specifications
- Fitting: Ceiling Pendant
- Voltage: 220-240V AC 50Hz
- Globe: GU10 7W LED (Pre-installed)
- Construction: Class I
- Weight: 0.861kg
- Adjustable suspension cord length: 1.0m max
Product Usage Instructions
Installation
- Ensure the power is switched off at the mains.
- Ensure the ceiling structure can support the weight of the pendant.
- Unpack the pendant carefully and place it on a flat surface.
- Loosen the screws on both sides of the canopy and remove the mounting bracket.
- Drive the Rawl plugs into the concrete ceiling, align the screw holes of the mounting bracket with the Rawl plugs, and close to the ceiling, lock them with screws.
- Connect the Live (L), Neutral (N), and Earth (E) according to the markings on the Terminal Block.
- Adjust the suspension cord length by adjusting the suspension wire. Ensure the cord anchorage is tight after adjustment.
- Fix the ceiling canopy to the mounting bracket with screws.
- Reconnect power at the main switch and switch on the pendant.
Usage
Ensure that this pendant light is used indoors only. Do not exceed the
maximum wattage specified. Make sure to earth the fitting properly.
Maintenance
Regularly clean the pendant light and check for any loose connections or
damage. Seek professional help if needed.
Before first using your new CRES Pendant, it is most important that you read
and follow these instructions, even if you feel you are quite familiar with
this type of product. Keep this document handy for future reference.
THIS FITTING MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN
- Ensure the power is switched off at the mains.
- Ensure the ceiling structure is capable of supporting the weight of the pendant.
- Unpack the pendant carefully and place it on a flat surface
- Loosen the screws (D) on both sides of the canopy (F) and remove the mounting bracket (A).
- Drive the Rawl plugs (C) into the concrete ceiling, align the screw holes of the mounting bracket (A) with the Rawl plugs and close to the ceiling, lock them with screws (B).
- Then connect the Live (L), Neutral (N) and Earth (E) according to the markings on the Terminal Block (E) :
- Adjust the suspension cord length first by adjusting the suspension wire (G). Ensure that the screw in cord anchorage (H) is tight after adjustment.
- Fix the ceiling canopy (F) to the mounting bracket (A) by screws (D).
- Pre-installed GU10 globe (I).
- Reconnect power at the main switch.
- Switch on the pendant.
WARNING:
- Not designed for outdoor use.
- Do not exceed the maximum wattage
- This fitting must be earthed.
- Ensure your ceiling structure is capable of supporting the weight of the pendant
SPECIFICATIONS
- Fitting: Ceiling Pendant
- Voltage: 220-240V AC 50Hz
- Globe : GU10 7W LED (Pre-installed)
- Construction: Class I
- Weight: 0.861kg
- Adjustable suspension cord length: 1.0m max
Warranty
Brilliant Lighting warrants this product against defects in manufacture and workmanship for 3 years from the date of purchase or as specified elsewhere. For products used in non-domestic or commercial applications, Brilliant Lighting warrants this product for 3 months from the date of purchase. This warranty is only valid for products installed and operated within the guidelines specified by Brilliant Lighting, and within the correct operating voltage ranges as stated on the product’s rating label.
Warranty does not include damage or loss arising from incorrect installation,
operation or maintenance of this product, damage caused through modification,
incorrect installation, service by unqualified or unauthorised personnel or
lack of regular maintenance and cleaning. Proof of installation by qualified
personnel may be required, e.g. Electrical Safety Certificate. Proof of
purchase must be supplied with all warranty claims.
This warranty is provided in addition to any other rights and remedies of the
customer under any law.
In applications not intended for household, personal or domestic use,
liability is limited to replacement or reimbursement of product only.
Brilliant Lighting does not warranty the costs of removal or re-installation
of this product or associated components.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if goods fail to be of
acceptable quality and the failure does not amount to a major failure.
Any claim under this warranty must be made within the specified warranty period fro he date of purchase of this product. To claim the warranty; at your own expense take the product (with proof of purchase – receipt or similar) to the store where you purchased the product or contact Brilliant Lighting at the address below.
This warranty is given by:
- Brilliant Lighting (Aust) Pty. Ltd.
- ADDRESS: ABN 37 006 203 694 956 Stud Road Rowville, VIC 3178
- Phone: 03 9765 2555
- Email: Warranty@brilliantlighting.com.au
MADE IN CHINA
FAQ
- Q: Can I use this pendant light outdoors?
- A: No, this pendant light is not designed for outdoor use. It should only be used indoors.
- Q: What should I do if I exceed the maximum wattage?
- A: Do not exceed the maximum wattage specified as it may cause damage to the light fitting or pose a safety hazard. Stick to the recommended wattage.
- Q: How do I adjust the suspension cord length?
- A: Adjust the suspension wire to change the length of the cord. Ensure that the cord anchorage is tight after making adjustments.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>