Milerong BS935 LED Karaoke Machine Bluetooth Speaker with Voice Changing Mic User Manual
- June 13, 2024
- Milerong
Table of Contents
Milerong BS935 LED Karaoke Machine Bluetooth Speaker with Voice Changing
Mic
Product Overview
- Mode key
- LED Lightmode
- Power On/Off/Play
- Previous track/Decrease volume
- Next track/Increase volume
- USB C Input
- Jack connection: AUX Function/ Line In
- TF Card slot
- Charging Port
- Indicator Lights
- Power On/Off/Play
- Increase volume
- Decrease volume
- Microphone Modes
- Indicator Lights
- Charging Port
Specifications
- Bluetooth version 5.0
- Charging voltage: 5V ==
- Speaker Lithium battery 1200mAh 3.7V
- Microphone Lithium battery 500mAh 3.7V
- Max. Working Time: Up to 2h (Depending of the volume)
- Operating distance: up to 10 meters
- Frequency: 20Hz-20KHz
- Impedance: 4 Ohms
- Output power: 5W
- THD: less than 0.5%
- SNR: >80dB
- Support Micro SD card up to 32GB
Operation
- Press and hold the button to turn on the speaker. The blue indicator light will flash, indicating that the device is ready to be paired.
- Press and hold the button to turn it off.
Playing music via Bluetooth:
From your device’s Bluetooth menu, search for new devices and select
“TTKARAOKE” to pair with your phone. Once successfully paired, you will hear a
confirmation sound and the indicator light will remain steady.
Playing music by Micro SD Card:
Insert a Micro SD card into the corresponding slot and the speaker will
automatically play the music from it.
Playing music by Micro USB :
Insert a Micro USB into the corresponding slot and the speaker will
automatically play the music from it.
Charging
Connect the speaker to a suitable power source using the supplied cable. During the charging process, the red indicator light will remain on. When the charging process is complete, the indicator will turn off.
Audio Input (Line in):
Insert the Jack cable into the Jack port of the speaker, and insert the other
end into your mp3/mp4 player/mobile phone or other compatible device to play
your music. When connecting the cable, the device will change modes
automatically.
Karaoke function
With the speaker on, press and hold the microphone button to turn it on.
These will automatically pair and the blue indicator light on the microphone
will remain on. Press the button to set the karaoke mode you want. There are 4
different options. Press the button until you reach the desired mode. Long
press the button power to turn it off
Controls
Troubleshooting
Warnings:
- Do not expose this product to rain or damp conditions.
- Prevent this item from falling as it could cause serious damage.
- Do not dismantle, repair or modify this product by yourself, contact an authorized specialist.
- In order to avoid any risk, do not dispose of this product inappropriately as there is a built-in Lithium battery.
- Clean the speaker with a dry cloth.
- Do not place this item near sources of heat or expose to direct sunlight.
- Do not insert any metal objects into this device as there is a risk of causing a short circuit in the unit.
- Keep out of reach of children.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. RF Exposure Information The device was evaluated to meet general F exposure requirements. This equipment should be installed and used with a minimum distance of 0 mm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>