MURDESIGN Salda Teak Panels Installation Guide
- June 30, 2024
- MURDESIGN
Table of Contents
Salda Teak Panels
“`html
Product Information
Specifications:
- Brand: Murdesign Panels
- Manufacturer: Mono Serra Group
- Installation Method: Glue and Nail
- Recommended Surface: Walls (studs or wallboard)
Product Usage Instructions
1. Prepare:
Prior to installation, follow these steps:
- Ensure walls are level.
- Add furring strips for stability.
2. Use a Level:
Start at the base of the wall, draw a straight line as a
reference.
3. Glue:
Lay panel flat, apply construction adhesive to the back for wall
preparation.
4. Nail:
Align panel bottom to reference line, nail to the wall for
security.
5. Glue Joints:
Apply construction adhesive to joints, wipe away excess for a
seamless design.
6. Repeat & Enjoy:
Repeat steps 4-5 to complete installation and enjoy your new
wall design!
For additional information and design ideas, visit our website
or contact us via email.
FAQ
Q: Can the panels be installed on any type of wall
surface?
A: The panels can be installed on walls with studs or wallboard.
For best results, follow the recommended installation steps.
Q: How do I ensure the panels are straight during
installation?
A: Always use a level to draw a reference line at the base of
the wall. This will help align the panels correctly.
“`
Installing your Murdesign Panels
The following are the tools & accessories needed to successfully install your
panels:
Installation Instructions
1
PREPARE
Prior to installation, we strongly recommend following these important steps:
· Store your Murdesign panels in the room where you plan to install them for a
period of 48 to 72 hours. It is essential that they become acclimatized to the
room temperature and humidity.
· Ensure that the relative humidity in the room is between 30% and 50%.
Humidity levels impact the wood’s expansion and contraction.
2 3 4
LEVEL WALLS
Ensure walls are level. Panels can be installed directly on studs or
wallboard. For best results, we recommend first adding furring strips to
assist in installation and to provide increased stability.
USE A LEVEL
Always use a level! Start at the base of the wall and draw a straight line.
This will act as your reference line to ensure your panels are straight, even
if the walls are not square.
GLUE
Lay panel flat on the floor front side down, then apply construction adhesive
to the back of the panel. This will assist in securing panel on wall in
preparation for nailing.
5
NAIL
Line up bottom of the panel to your reference line and adhere the panel to the
wall. Nail the panel to the wall for added security and durability. Position
nails in less visible locations for a smooth finish.
6
GLUE JOINTS
Reinforce each joint by applying construction adhesive, then wipe away excess
adhesive. This will prevent separation and create a seamless wall design.
REPEAT & ENJOY!
Repeat steps 4-6 to complete the installation, then sit back and enjoy!
The above instructions can be used for vertical, horizontal and diagonal
installations. Murdesign offers a variety of half and full wall design options
suitable for any interior décor.
Scan the QR code to visit our website for additional information, installation
tips and design ideas for any room in your home!
Questions?
Images and illustrations are intended for visual reference only Murdesign and logo are trademarks of Mono Serra Group. All rights reserved.
Scan me
… or contact us at murdesign@monoserra.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>