iTECH WEARABLES BOLD 3 Smart Watch User Guide
- June 28, 2024
- iTECH WEARABLES
Table of Contents
BOLD 3 Smart Watch
“`html
Product Information
Specifications:
- Brand: iTECH
- Model: BOLD 3
- Product Type: Smart Watch
- Charging Time: Up to 2 hours
- Charging Method: Magnetic charging cable
Product Usage Instructions
1. Unpack Contents:
Locate the watch and charging cable inside the box.
2. Charging:
Insert the cable into a computer USB port or UL-certified wall
charger. Avoid using fast chargers.
3. Fully Charge Watch:
Line up the metal pins on the charging cable with the contacts
on the back of the watch and lower until it snaps into place.
Charging can take up to 2 hours. A charging screen will appear to
confirm your watch is charging.
4. Download App:
Scan the QR code with your smartphone camera to download the
free mobile app.
5. Pair Your Watch:
Power on the watch (press and hold the side button for 5
seconds), open the mobile app, create an account, then tap the
watch icon to begin pairing. Pairing sets the time and date on your
watch. Enable Bluetooth on your phone but only pair your watch
using the mobile app.
6. Visit Us Online:
For the full user manual, help, and answers to many common
questions, visit us online at support.itechwearables.com. Enjoy
your watch!
FAQ
Q: How long does it take to fully charge the watch?
A: Charging can take up to 2 hours.
Q: Can I use a fast charger to charge the watch?
A: It is recommended to avoid using fast chargers for charging
the watch.
“`
1
UNPACK CONTENTS
Locate the watch and charging cable inside the box.
2
CHARGING
Insert the cable into a computer USB port or UL-certified wall charger.
Note: avoid using fast-chargers
3
FULLY CHARGE WATCH
Line up the metal pins on the charging cable with the
contacts on the back of the watch and lower until it snaps into place.
Charging can take up to 2 hours
The magnetic charging cable snaps into place.
A charging screen will appear to confirm your
watch is charging.
4
DOWNLOAD APP
Scan the QR code with your smartphone camera to
download our free mobile app.
5
PAIR YOUR WATCH
Power on the watch (press and hold the side button for 5 seconds), open the
mobile app, create an account,
then tap the watch icon to begin pairing. Pairing sets the time and
date on your watch.
Note: enable Bluetooth on your phone but only pair your watch using mobile
app.
6
VISIT US ONLINE
For the full user manual, help, and answers to many common
questions, visit us online:
support.itechwearables.com
Enjoy your watch!
FCC REGULATORY
COMPLIANCE
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no
FCC REGULATORY
COMPLIANCE (CONT.)
FCC REGULATORY
COMPLIANCE (CONT.)
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. This device complies
with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation. Warning: Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
BATTERY WARNING
BATTERY WARNING
CONT.
E-LABEL NAVIGATION
FCC ID: 2AJXA-IB3 Product: Smart Watch Model No: iTECH BOLD 3
BY
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>